I had oem LED taillights installed to my car. Dealer coded the car to avoid error lights on dash. The problem is now the city lights under xenons look dimmed. Not as bright as before. I asked him why did it happen and he said that it's normal as it needs to balance the current flow to supply enough power to the LED taillights. I'm not satisfied with this answer though.
View 3 RepliesI cannot stand the way they look, I tried just taking the bulbs out but it throws the warning light. Just curious to see any luck with turning them off in vagcom.
View 3 RepliesI have a set of retros with dual turns. I was wondering how to go about wiring up the turns as my city lights (i have a euro switch). Is there a diagram of the wiring anywhere?
View 3 RepliesSo I just picked up an R32 and it has a euro switch and euro projector headlights but I've noticed that my parking lights, city lights, and front fogs are all inoperative. Though the turn signals do work. I tried doing a quick search but wasn't really able to come up with anything as to a reason why.
View 7 Replies1998 Passat 1.8t B5 sedan. OEM fog lights up front. No rear fog lights.
I recently upgraded to a "Euro" light switch to get more flexibility with my lights. Put tape on the TFL pin to disable DRLs in OFF Mode. Put tape on the 56d pin to disable DRLs in CITY LIGHTS (Parking Lights) mode. Completely successful -- no DRLs, just as taping the TFL pin on the original light switch accomplished long ago.
BEFORE I did any taping this time, I installed the Euro switch AS IS and tested all of its modes and physical positions:
(1) OFF: No fog light position available (switch knob will not pull out). As expected and okay.
(2) FULL ON Fog lights come on (but who the hell can see them?!?) when switch knob is pulled out one stop into the fog light position -- and the little front fog symbol on the switch lights up. Again, expected and just fine.
(3) CITY LIGHTS (Parking Lights): The fog lights position is physically available by pulling the switch knob out one stop... BUT THE PARKING LIGHTS DO NOT COME ON (regardless of ignition switch position, emergency hand brake position, etc., etc.) And the little fog light symbol on the switch does not light up. (Not surprisingly, pulling the knob further out to the REAR fog light position does nothing either.)
THIS IS NOT GOOD - since with a Euroswitch one ought to be able to manually select and de-select the fog lights while in CITY LIGHTS (Parking Lights) mode!
How to make my FRONT FOG LIGHTS available in Euroswitch CITY LIGHTS (Parking Lights) mode...?
I just got a new switch from the dealer, only rear fog control (don't have OEM LED's yet), and I want to turn to the right one position, but the HID's come on, and no city lights. What am I missing?
I have a VCDS... [URL] .....
So i have been looking to get some new headlights with the projector housing but noticed that most of them have a fog light which my car does not have. I know in order to get them to work properly i would need the euro switch, but would i need to run additional wires through the firewall?
View 8 Replies95 1.9L 5 speed. 142K Runs like a champ but over the last few colder mornings, low 40's high 30's, the starter is slow to get turning. This morning it was really slow, as I held the switch to the crank position for a good 10-15 seconds before it started. To the point that the dash lights dimmed, like a larger load was on the battery. Once it starts its fine. Later in the day it starts just like it should. Just wondering if I may have a starter about to go south on me.
View 5 RepliesI just took delivery of a new 2011 golf and noticed the footwell lights were absent, presumably because Canadians always seem to get shafted. I would like to hear from other Canadian golf owners before going to the dealer.
If absent footwell lights are indeed standard for Canadian golfs, I'm thinking about installing them myself. I found a link on another site that details the install on an MKV : [URL]...
I installed the lights and they work fine but everytime I turn them on they throw a bulb out error message. I have the cold diagnosis turned off for the fogs and I still have it. Whats next?
Here is my coding. F78F8F2700041500470F0000000000000018110B5C00010000 0000000000
'93 2wd, standard instrument panel. Headlights and brake lights work fine. No instrument lights or taillights. The problem, at least with the dash lights, seems to be intermittent. My son has told me the dash lights are out, but they worked when I drove it later. I rarely drive the van. Is this a problem with the headlight switch? I pulled all the fuses, and checked the bulbs in the taillights, and everything looked ok.
View 9 RepliesHave a 2005 Mercury Mariner Premier, 108k miles, 3.0L engine. Was driving last week and the ABS light came on. Then slowly the dashboard lights dimmed to black and lost electricity. All this within a couple miles of driving. Limped home and tested the battery - dead. Recharged and tested the next morning - still fully charged. Put another known good battery in and drove about an hour out and on the way home same thing happened.
I suspect the alternator, but on testing, the alternator is pushing 14.3 volts on a good battery. My fear now is the tear down necessary to change the alternator if it is not actually bad. Anything else I should look for / test before I start pulling the alternator out? Any other tests of the alternator that I can do while it's still installed?
Installed the euroswitch yesterday because I want the parking lights to work in the front. All the lights work except for the front parking! In the second click I have the rear but no front. Am I missing something or do I have a bad euroswitch?
View 12 RepliesI have a 1994 Volvo 940 non turbo wagon. I just started having issues with the brakes lights and taillights not working. I have checked all the fuses visually and also did a continuity test on each one found all the fuses were good. I have replaced the all the relays, I have replaced the large red relay ( bulb failure relay ) and even did a continuity check on the bulb failure relay pins that are specifically for the rear brake light, everything checked out fine. I hesitate to change the brake light switch because the third brake light is working fine. I have considered replacing the headlight switch due to the taillights won't come on when the lights switch is on. My headlights do work though. There is no light on the dash indicating a bulb is out now since I replaced the third brake light bulb.
1994 Volvo 940 wagon
Non turbo
I discovered today that I have no brake lights on my '02 Excursion. The center brake light works fine, but the two in the taillights don't come on. Stopped and bought new bulbs on the way home and replaced both, but the ones I pulled out were not blown. Checked the fuse - OK. Taillights and turn signals both work fine.
View 3 RepliesI just picked up my new Golf tdi yesterday. When the headlights are on so are the interior footwell lights on either side of the console. They are dimmed, but I would like to turn them off.
View 4 RepliesI just picked up a 2007 Lexus GS450h in MM.
I have tried everything that I could up to this point but can not get my fog lights and city lights to work. I have changed the bulbs, checked the fuses and the only other thing that I can think of is the fog light relay. What is the location of the fog light relay on the 3GS, I am almost positive that this is definitely the issue for the fogs and I'm also hopeful that it could be the issue with the city lights.
Also, I've seen that there is a 7.5a fuse in the trunk that is labeled 'RR Fog', I'm pretty sure this is for nonUSDM models but maybe this being the culprit?
I changed the bulbs from the stock to LED then the error light was showing so I decided to switch back the stock lights (I did this while the lights were on).
And now my city lights will not turn on at all! It is a fuse that is causing this problem?
I have had this since the day I bought my car. When the tempurature outside is hot, the screen on my R dash is dimmed, almost like a cirlcle around, and every some often (has only happened twoce) I turn the car on and the screen doesn't even come on, it's just blank. Just wondering. I think I jut have to have it replace and all, but it could be something....
View 13 RepliesYesterday, I installed H&R Sport Springs and then Last night, I notice my HID headlight is dimmed downward to the ground. Do I have to use VAGCOM to make the adjustment?
View 24 RepliesFuel pump went out, took it to garage to have it fixed. Got it back...now I have no headlights, taillights, or dash lights. I have turn signals, break lights, and brights. I've checked fuses under the hood, and on both sides. Replaced them all twice just to be sure. I've changed the ignition switch and the multi-function switch. I'm at a loss!
View 3 Replies