Golf/GTI VI :: Bulb Size For Fog / Driving Light For MK6?
Feb 15, 2010
What is the size bulb for the Fog light. I search but nothing come up.
View 2 RepliesWhat is the size bulb for the Fog light. I search but nothing come up.
View 2 RepliesLooking to find out what size bulb goes in the red light located on the lower part of the front door panel.
View 2 RepliesWhat size the bulb is for the instrument cluster?
View 2 Repliesi need to know what bulb size is the bumper turn signals. Mine has blown out.
View 2 RepliesThis just started happening a few days ago. The right bulb will turn on normally with the rest of the car, but as I'm driving it will randomly turn off for a second, then power back on. Some nights I won't see the issue at all, other nights it will be doing this every other couple of minutes or so.
View 10 RepliesI ordered and replaced all the LEDs in the car and the license plate LEDs as well. Now I got that damn orange bulb on my dash. Anyway to clear it?
View 4 RepliesI want to change out my fog light bulbs on my MK6 Golf TDI. does this will set off any E-Codes or can I just plug and play?
View 5 Replies I have read all 11 pages of the led light post, and I am more confused then when I started. I bought Ed's opt.4 lights with the LED's. I bought the light kit he recommended: [URL] .... with H7 harness. I have 2012 North American TDI Golf. I purchased and had installed the Bold eruo light switch with light sensor kit. I had someone install everything for me. They have had trouble finding out the proper codes needed. The issues I am having are:
1: with the above set up, they can not get the light bulb out warning light to go out. I was told that it is due to the light kit purchased above, and the fact that it only connects to the drivers side harness, and not the passenger side, so the warning light on my car keeps saying there is a bulb out on the right side.
2: With the euro switch in the Auto position, I get no DRL's at all. The only way I get that is if I turn the switch to the next position, and then I get the low beams, as well as the LED's, and no fogs. This stays the same day or night with the light switch in this position. To get the fogs as well, I turn the knob one more turn, and pull it out, and this gives me the fogs as well as the low beams and LED's.
My questions are:
1: can I get the LED's as DRL's in the Auto position or in the position next to it, and then have the rest of the lights come on automatically at night via the sensor? If so, what are the vagcom codes I would need?
2: Is there anyway to get the bulb out warning light to go away without putting in a different light kit. I was told by the installer that they had to try a few light kits to get one to work with the coding of the vw, and the kit they use connects with two harnesses(one for each head light, and not one harness for both as my set up is).
How do you remove the city or parking light bulb in the 2011 GTI, without the HID projector headlights? I have the regular halogen set-up...I want to change them to a super white bulb to match my Xenesis bulbs.
I know its the 194 bulb, I just can't seem to pull it free...
just recently purchased an R32 and wanted to know which filter size the r32 uses ? i have never changed a stock filter before because i have always had a cold air intake but have decided to keep the stock air filter on this one.
View 10 RepliesWhat is the proper socket size for the oil filter housing?
View 2 RepliesI'm going to be putting on some H&R street coils and I want to do just enough of a drop so I get the best performance and I'm wondering how big of a drop that would be so that it doesn't ruin the turning and handling
View 6 RepliesMy '06 GS300 has a bulb in the driving lights (inner set, closest to the grill) that is out. It is the small light that turns-on when you turn the proper night-time lights on. SO, my driving lights operate normally, but when I switch the lights on, and the smaller bulbs turn on, one is out.
I was able to locate a post that suggested a 194/t10 LED light for replacement. How to confirm this is the proper bulb for the job? Also see these listed as #2825 in halogen.
'm a former 2004 Jetta GLI owner...looking to get back into the game with a 2013 GTI. One thing I'm confused about is the GPS screen size. Many of the cars I've seen, including my friend's 2013 GLI has the RNS315 with a very small display. On the VW website it shows a much larger display in some of the photos, and I'm pretty sure I've seen a larger display on some of the GTI's I've seen in my neighborhood.
View 3 RepliesJust curious how large of an SD card the MK 7 audio system can recognize, as I believe there were limitation in previous generations. I was hoping to get a 128GB card and throw all my tunes on there instead of using an ipod or my phone.
View 15 RepliesI am at the point where I am going to change my tires on my wheels. Currently running BBS RC's which are 8x17 ET32 with tires 225/45/17.
For those who are running wheels with such specs or more "exagerated" have you had your odometer recalibrated to respect the new rolling diameter change or not? If yes what was your easiest solution. I know depending on wheel/tire sizes, various factors can be affected including speed indication.
From all the websites I have seen and asked, I am told that I can go as less a 215 wide but not lower than 45 in "thickness" (if I stay in 17).
My objective is to of course remove rubbing during load and go a bit lower and therefore do not know if 215/45/17 will be enough of a change from 225/45/17.
So with just me in the car i get a clunk in the rear going over medium size cracks in the road. but with the wife and kids in the car the clunk is not as prevalent. VMR springs...
View 5 RepliesI need to take the tranny (automatic) off the old engine (BEW).
What are type/size are the bolts connecting the tranny to the block?
The 2 bottom ones I got out using (assuming) 10mm (?) triple square.
What size (socket/tool) and type (triple square, torx, allen) are the others?
My turning light needs a bulb replacement (I believe, since when I click to turn right it makes quicker clicking sounds). Does this mean bulb is out or wiring is out?
As for the side light (also on the right) has fallen off and can no longer be screwed back in place as that part has broken off so I will be buying the replacement part/lamp. However, when it fell, the wiring was disconnected so i have lost the bulb and any connection to it. I think I still have the rubber wiring harness, just missing the wiring & bulb.
I just picked up a new 07 Touareg and on my first night cruising my new ride, I got this indication for something regarding AFS and VEH. WALLET on my display. Then the light bulb failure light will shows.
View 1 RepliesThe left side light bulb on the overhead reading light console is burned out. How do I remove the lens or open the cover to replace this bulb?
View 3 Replies