Golf/GTI VI :: Airbag Light Came On After Euro Cup Holder Install?
Jul 12, 2011
Ok, so I installed my euro cupholder today, and I love it. Simple, yet so pleasing! So just for those interested in possibly installing one, but worried about the work, I'm not MKVI inclined whatsoever, so I figured if it would take someone who knows their car well an hour and half, it'd take me 2 and a quarter. I went slowly and as I took the console apart, I meticulously cleaned all the crevices and it only took about 1.5 hours, and that was with some re-fittting and tweaking to make sure everything was perfect. So with my first dive into takng apart the car, it was fairly painless and I love the outcome....except:
For some reason I get an Airbag Error and a warning light. The passenger light works well and goes off with a passenger in thier seat, like its supposed to. I only unplugged, then replugged in 5 things: Passenger Airbag on/ off light, ESP on / off button, 12 V power, Light for shifter (auto), and I Pod (well just an aux line in).
View 2 Replies
Advertisement
I put a double DIN unit in my 98 F150 and now the airbag light is no. N o flashing either. Turn the key on, nothing, start the engine, Airbag light. I've got the dash apart but I'm not seeing anything that I may have disconnected.
View 8 Replies
I had KW V2s installed on my R and the shop said they cause the ABS warning to come on so how to code out the alert using VCDS?
View 15 Replies
So I go install my led tails and only one damn tail light up. Any problem when installing these tails? I followed the steps and also the ghetto harness made.
View 9 Replies
Will the Mk5 Euro switch work on the Mk6 Golf?
View 9 Replies
Just installed my Euro switch from USP Motorsports, When I have the DRL's on with fogs whichever side the flasher is activated on dims the L.E.D DRL instead of shutting it off or keeping it at full power. Is this normal?
View 3 Replies
This happened to me, my tires are aired up to 40 all around. Does the light comes on if wheels are out of alignment?.
View 4 Replies
I have led bulbs in the stock tray Because I can't find red bulbs to fit these tails. Can't put white bulbs because my brake lights will be white and NYPD will be on my case
1.w euro switch turned off one bar in 3rd brake light on and top two bulbs on but dim
2. When car is turned off switch off top bulbs stay on but dim but they turn off after a few minutes
3. Replaced both license plate bulbs and only the left side bulb will illuminate but if I turn the euro switch from on to off quickly the right bulb will Flicker as if it had a quick jolt of power to it.
4.turn signals are led ambers they blink way faster than stock is this normal?
View 20 Replies
Having a few electrical issues lately, that are really starting to irritate me. This is pretty random. OCCASIONALLY, not all the time. When I turn my euro switch all the way to the right, my windshield wipers will go across the windshield twice. Obviously the wipers aren't on. And I don't accidentally hit the stalk. This just random and annoying when it smears stuff across the windshield. I don't even know where to start.
View 2 Replies
has run the 4th wires from the taillight plugs to the control module. Which route did you take from the rear to the front of the car? I assume you took both down the driver's side.
View 24 Replies
I need Vag-Com to reset a failed lamp warning light . . . I'm assuming because I ended up pulling the switch out too far, which commands the rear fog light to come on, which doesn't exist, I caused the "lamp failure" warning light and chime to come on and NOT GO OFF (I installed my new Euro headlight switch last night).
I checked and have no dead lamps. I put the old switch back in for a bit but it's still reporting a failed lamp. I searched for this problem before posting but the search engine on this site is extremely poor ... .Couldn't find anything in the manual either. It assumes we're idiots because it says a certified mechanic should change the lamps but oh, carry extras with you !!??
View 3 Replies
Had the tail lights coded for at a local shop.. realized as I was leaving that the reverse lights are throwing an error. Can these be coded for? Now that the car recognizes the tails as LED, is the error coming from the incandescent? Should I replace the bulbs with low pulling LEDs without resistors? As for the fog, do I have to replace the bulb as well? No euro switch or wiring done. Basically, how do I get rid of the error.
View 3 Replies
Just picked up my 2013 GTI and was pleasantly surprised to find that it came with the Euro dash cubby already installed. Also discovered a Euro warning triangle in the spare tire compartment. Have these features been added as standard on the 2013's or did I just get lucky?
Now for the transmission question - do others find the 6 MT notchy, particularly between 1st and 2nd gear?
View 6 Replies
I am installing Sparco Evo Seats, a custom Harness Bar and racing harnesses in my MK4 R32 and have questions about wiring of the airbag and seatbelt sensor. What do I need to do so the airbag light and seatbelt warning light do not come on.
View 2 Replies
So after years of making fun of my Audi friends for always having their air bag lights pop on, on the way to the grocery store my airbag light decided to come on and stay on
View 11 Replies
I purchased a 2002 2.0 jetta a couple of months ago and not long after I had it I noticed that the airbag light had come on. I brought it to a garage and had them check it out and they came back with a code that read 01218 side airbag igniter passenger side. When. I asked about getting this fixed they really couldn't say much about what exactly the problem was other then to say that it could be a problem with the whole system...which I don't get as the code only came back for the side airbag igniter. I also went and spoke to the dealer here in town and they wouldn't even speak to me about it unless I let them have the car be seen by one of their mechanics and putting the computer on it to read the code which I had already told them about.
View 6 Replies
1st: 00532 Supply Voltage Too Low - Intermittent
2nd: 00592 Seat Belt Switch on Passenger Side -E25
Resistance Too High - Intermittent
3rd: 00592 Seat Belt Switch on Passenger Side -E25
Resistance Too Low -Intermittent
the piece where the passenger side seat belt clicks into has a chunk broken off of it, now im assuming that this is causing most (maybe all?) of the problem here?
View 10 Replies
I was check fuses looking to see if taillight bulb was bad. I pulled out a few while the car was running, then there was a beep, and airbag light came on. Tailight fuse was ok, just had a bad bulb. Put in new bulb, everything works fine but airbag light stays on. All fuses are good.
View 3 Replies
I have a couple of fun curves I hit daily and most days I push the car pretty hard. So, I hit one the other day on the way home from work and the freaking airbag light came on with a fault message. I immediately suspected that when my seat belt tightened that the sensor in the seat belt connector freaked out. I later scanned with VAGCOM and confirmed that I have the famous high resistance message for the driver side seat belt connector. I remember that some people had luck by cleaning the connections to the bottom of the seat and the switch. Maybe that is all I have to do. Got to love the .:R. I break stuff as fast as I fix stuff.
View 13 Replies
So i was driving last night at 6am driving my friend home after drinking... and the airbag light came on on the HWY it said "AIRBAG FAILED" then i went to get gas turned off the car... then the light went away when i left... that would stay on the history on the ECU... i wanna know if i should take it to the dealer..
View 3 Replies
So I unplugged my front seats and the airbag fault light came on. When I hooked them back up the light remained on. Is there a trick to this that I am unaware of? I would really like to get this light off my dash asap.
View 6 Replies
