Golf/GTI VI :: 2013 - Clunk Noise On Reverse Brake
Aug 19, 2012
I'm taking possession of my new GTI 2013 4dr Dsg next Wednesday.
I actually own a 06 Audi A3 3.2 dropped with ST Coilovers that impressed me at the beginning in term of comfort BUT I don't want another experience with those coilovers (clunking noise, reverse brake).
I am hesitating with many combination.
My needs: get rid of the horrible wheel gap AND maintain the best daily ride comfort 'cause I live in Quebec and I can not count anymore the potholes and patches on the roads....
The setups I am hesitating with:
-I LOVE how the H&R Supersports sit, that IS the drop level I want. And If I go with them, I would also buy some adjustable koni yellow. *I worry about the comfort*
-DG springs *worry to almost not see the difference between DG and stock look*
-VWR springs *worry about getting the reverse rake I am afraid of*
with DG or VWR springs I would conserve the stock shocks, because I guess those springs are not so low to need shorter shocks.
View 6 Replies
Advertisement
Notice a clunk noise when brake applied and first it seems when the car is turning right, but now I think as long as the surface is uneven it would do that as long as the brake is applied at the same time. It's a 2014 Sport Ltd.
View 4 Replies
Every time I reverse it sounds like something crack, what this might be. It's very annoying!! Everything is stock. Have around 7k miles...
View 7 Replies
I've been noticing when going in reverse and then braking, when then going forward and braking there is a clunk which seems to come from the front brakes. Is this normal? Shifting of the pads in the caliper?
View 22 Replies
What is the source of the sound? Listen for the clunk b/w 3 and 4 seconds. I just dropped off my 2016 Super Duty 6.7 CC LB 4x2 at the dealership. I'm afraid that they will say the sound is a characteristic but I never had the sound on my 2011 Super Duty 6.7 CC LB 4x4. This sound happens when I go from drive to reverse or when using the exhaust brake when towing. The sound does not exist when the transmission is cold only when it is fully hot. It will also make this noise when climbing a really steep hill in first gear with fiver and the torque converter needs to slip a little.
As far as I can tell all of the u joints are tight and the axial support is tight I only have 2000 miles on my truck.
[URL] ....
View 5 Replies
My 2002 durango when put in reverse makes clunk noise and I went under truck it looks like its coming from transfer case by rear shaft....
View 8 Replies
The car is manual, 95.000 KM. The problem is everytime i put the car in gear and start rolling, I hear a loud thump/clunk coming from the underside of the engine.
The only mods on the car are intake, a tune and a dog bone insert. The clanking is way more apparent when i'm in reverse. Whether i'm backing out of my uphill driveway or on a flat surface, EVERYTIME the car is at a dead stop and I give it throttle, something clanks...
My mechanic had lifted the car. He thought it might have been suspension, but he ruled that out. He believes that it is in fact the dog bone insert that is faulty. Upon further inspection, the red insert (from USP I believe) had cracked. although the insert was visibly broken (I've had it for barely 5000 km's, WTF) I'm not entirely sure that that is what's making the clunking sound because that sound was there from before I had put the dog bone insert in place.
View 2 Replies
2002 ford explorer 4x4 150k miles when i put it in reverse a loud clunk noise but when put in drive no clunk noise. But on highway when its shifts a very loud clunk and like a real hard shift !!!!!o/d light is flashing also .transmission shift solenoid ? rear ?
View 8 Replies
So I've been chasing this subframe clunk for some time now and have hit a wall on what I can do to stop it. Order of "fixes" :
-retroque bolts
-buy install audi bolts
-buy install TyrolSport kit
-replace every main subframe bolt with ARP bolts
Every time the clunk kept getting quieter or nonexistent but then someone comes back. Like right now I have the subframe collars installed and ALL 6 bolts are ARP. Clunk was gone for about a month and now its back, quiet but still driving me nuts.
What I can do? My next try is new strut tower bushings and bearings as people say that can cause a clunk. just weird how I will mess with the subframe and noise will go away then slowly come back, making me think its not the bushings. It appears to come from passenger side but anything is possible.
View 11 Replies
When I put my car (04 s60 2.5t) in reverse it hesitate, then when I press the pedal it roll back with a loud clunk noise. But if I put the car in drive before putting it in reverse everything goes smoothly.
View 2 Replies
I have a 2009 Corolla S and the symptoms are as follows:
1. Normal forward driving, brakes work fine (and as expected without sound).
2. In reverse, when I apply the brakes I hear a click (clunk) sound from the front brakes. It only makes the sound when I'm going from moving to stopping (IE: I cant just keep pressing the brake once stopped to generate the noise). But if I let myself continue in reverse and press pedal again, it will make the same sound (very repeatable). I don't need to go forward to replicate the sound, I can just stay in reverse, stop (CLICK), continue in reverse, stop (CLICK), etc.
3. The it's noticable in the pedal. I can feel it on the brake with my foot when the noise happens.
4. It happens when I depress the brake pedal about 1/4 down, a gentle stop. And usually happens every time when I back out of my driveway or parking spot.
5. GF's sister's 2009 corolla CE does NOT make this noise in reverse.
6. 20,000 miles, Orig tires/brakes, didn't happen 4ish months ago.
I plan on putting winter tires on next month. Perhaps I'll take a look at the pads to make sure they aren't moving around, but wouldn't I also hear the noise in forward motion? Or when I switch from forward to reverse?
View 13 Replies
I have a 2013 tdi. 40k miles. For the past few weeks iv been hearing a noise from the front. On small bumps or potholes or just going over a bumpy road its. Its like a rattle clunky sound. Going in my driveway I hear it too. I also noticed there is a squeak when i hit a medium to bigger hole. This is really annoying because this car is fairly new. Is the dealer gonna cover it if there is anything wrong?
View 5 Replies
For a few months now I have been hearing a tap clunk type noise coming from under the car when I shift the auto trans into drive and reverse. Also sometimes when the car is slowing when driving I hear the tap sound as it shifts into first. I drove in by my local dealer and they listened to it and said Elantra transmissions can get noisy there is nothing wrong. They told me I have plenty of Warranty left so if something happens I will be covered.
View 2 Replies
I'm getting a "thunk" or "clunk" noise when driving over bumps/patched/uneven roads in my Elantra GT.
It's a hollow noise, I don't hear it unless I hit a bump/patch in the road. Doesn't have to be a large bump.
25k miles, Automatic Transmission. it almost seems to be one side (right) more than the other.
Is this a common issue for this model/year? What was the cause?
View 5 Replies
I have a '13 SE that I purchased new last year and recently I've noticed a noise in my steering when I am turning the wheel at slow speeds.
It's like a clunking or knocking noise when I turn the wheel either right or left all the way. I'm totally clueless as to what could cause this sort of noises.
View 7 Replies
Ive got a 04 f350 that after u shift into 4hi or 4lo when u accelerate it it makes loud clunk noise in fwd or reverse hi or lo. With hubs unlocked it still clunks. Have checked, wheel bearings, axle U-joints, and driveshaft joints all good. So I am thinking I've got issues in t-case. Popped drain plug out and wow that dex merc 4 looks nasty. So thinking I need exploded view of transfer case.
View 4 Replies
Just picked up a new 2014 rx fsport and 75% of the time I release the e-brake it has a loud clunk as if metal smashing metal. I tried releasing it really slow and it still does the same. The vehicle is parked on flat pavement. It is not a low click noise that I am used to but a loud clunk.
View 6 Replies
I get a clunk noise when stepping on and releasing the brakes occasionally but not always. This occurs even with the engine off and the vehicle stationary. I also hear some other noise like some sort of vacuum servo thing is happening.
View 4 Replies
I don't know if this is normal, but my ES350making a (not loud) whirring noise only in reverse. I'm not sure if this is normal.
View 4 Replies
Lexus 2013 GS350 AWD. Recently picked up this gs and upon driving. I have two concerns, one is the ticking noise in park or reverse. Secondly is the noise in the cabin by the drivers side front window.
View 7 Replies
My es350 with 4000 miles makes slight hissing noise only in Reverse (without moving the car), the sound comes from under hood, and more like air leaking noise (AC off), not loud, I can only hear it when in my garage with radio off.
View 3 Replies
