Golf/GTI VI :: 1999 - Chatter When Slipping The Clutch Into First And Sometimes Second Gear
Jul 10, 2015
My first VW was '99 Jetta that had 150xxx miles on the original clutch before it was stolen in '11. I leased a GTI shortly after, and decided to buy it out last year. At 35,000 miles I am starting to get I guess what I would describe as a chatter when slipping the clutch into first and sometimes second. Car is stock, never abused. I tried to reproduce this for a video clip but the problem is sporadic. Never had a clutch go on me so I don't know what to expect, but from what I've seen of people losing their stock clutches after ecu flashes is the car slipping under wot in top gear. I don't have that issue. No other symptoms. No stubborn shifts or anything, clutch still feels the same and rpm's have never flared up on shifts.
View 5 Replies
Advertisement
I installed a new clutch, pressure plate, and flywheel at 154,000 and I'm now just over 155,000. I drove it very conservatively for at least 1,000 miles, and had no issues whatsoever.
Now, after sitting for a day, starting off in first gear, I'll get some clutch chatter. Outside of first starting out in 1st, every other gear is solid. And the 1st gear chatter tends to get better as the car is driven longer.
Secondly, it happened today, I'm getting what I thought I experienced before as clutch slippage in 5th gear: I'll lose acceleration as if the clutch is slipping, but the revs won't spike even if I tap the throttle. If I come off for a second and go back on, everything is fine. It doesn't make sense that's it's slipping as it's brand news.
It also seems to happen when it's been rainy or wet, but that could be all in my head.
View 1 Replies
So I have a stage 2 endurance clutch and light weight flywheel on my car. I had not really gotten on it of late until yesterday. I was getting on the highway and really got on it. When I hit third gear it felt like my clutch was slipping. I have only had it on the car for like six months and about 10,000 miles. It could be worn out all ready? And after the incident yesterday I pushed the clutch in and held it to let it cool down a bit after it did it held fine even in higher Rpms didn't feel like any kind of slipping. Pulled very strong. This morning after having all night to cool off (and I mite just still be freaked out a bit) but it seemed to feel different, like a possible slip at 3,000 Rpms but again I mite just be freaking out about nothing. What does a master cylinder or slave cylinder going out feel like?
View 1 Replies
So I got my stage one flash yesterday and I noticed 5th gear slipping already. I don't plan on getting a k04 upgrade, maybe stage 2 down the road. so I am looking into the drop in clutches, preferably this one [URL] .... I am just trying to find out some reviews from people who are currently running drop in clutches and the issues that they have come across.
View 8 Replies
So I was driving my car and notice when I was in 5th gear the rpm was at 3 and was increasing to 4 then when back to 3 or 3500 rpm. I tired it again but with a little more gas to it and got the same results. Wondering if this is signs of clutch slipping or another cause.
View 5 Replies
I have a 2012 Golf R 6 Speed manual, Just noticed that my clutch was Slipping in fifth gear when I give it gas. What clutch kit is recommended. It is the first time I have a VW and dont really know what will work better on it. Mods are Full catless downpipe and exhaust, Injen air intake and Revo stage 2 tune, ST Coilovers and NICHE Bronze wheels. Podi boost gauge and AEM wideband. I put down 285hp and 310TQ at Dyno jet 2 weeks ago I was kind of suprise expected a bit more but maybe the clutch was going bad already.
View 1 Replies
Clutch is starting to slip - can't handle torque above 3k in 6th gear.
6500 miles on the car
700 miles with module
Never launched - just wind out gears occasionally
Don't have to ride clutch on hills
Not a daily driver - not stuck in traffic
I shift like a granny...
View 10 Replies
Having clutch issues? I have just put 10k miles on my JSW and the clutch feels like it slipping in 1st gear when heavier load(uphill ETC) is present its even worse. We have never drove it hard pretty much cream puff.
View 9 Replies
When I have the clutch depressed and start to let out as I'm either in reverse or in first gear it makes a clatter/chatter noise. It also occurs when I have the clutch depressed and just rev the engine and it's in neutral. Some days it's louder than others. It doesn't matter if the engine is cool or at normal temp.
View 7 Replies
I have a 1997 F250 heavy duty 4x4 7.5 efi. I just bought a 2003 weekend worrior weighing 5800lbs dry. When I go up slight hills in 4th gear it seems to work real hard especially on freeways, could my clutch be slipping or am I just at max tow
View 11 Replies
New truck 11000kms ago thats done medium amount of work but nothing heavy or sustained for long periods of time. I get the feeling of clutches slipping especially when truck is cold but also when normal temps. Doesnt make any weird noises or anything. I can really notice the difference in torque if in manual mode being much better, but still not perfect if i stomp on the gas pedal and go through the gears in manual mode will still slip. Also is really harsh shift if i come to a halt in 3rd manual mode with the brake pedal depressed push minus button the truck makes very loud clunk noise into gear 2 then 1. Took it to ford they couldnt find anything ? Thinking of trying another dealer.
View 2 Replies
I've got a 07 accent with 90k miles on it. It has recently started slipping some (revs high, while in gear, without accelerating, especially in 5th gear). It also can be physically hard to move the shifter into gear sometimes (with my hand).
So, does this mean I need a new clutch? Or are there other possibilities? Should I replace/fix anything with the clutch? Sounds like the flywheel should be resurfaced? Will it shift more smoothly after the fix?
Is this something a newb could do himself? I can change the oil, rotate tires. Outside of that I haven't done much. My toolset for now is fairly limited: two jackstands, a trolley jack, torque-wrench and ratchet sets.
View 12 Replies
Experienced a chatter in the clutch pedal with the a/c on when clutch pedal is pushed in. To me it feels like the throw bearing isn't disengaging the clutch fully, plus my clutch is kind of high once full disengage unless its normal.
View 5 Replies
My car has a knocking icking noise all the time, I think it is clutch chatter, but not fully sure. This is a 6MT 2011 GTI. It is annoying, but if you turn the radio up.... The annoying sound goes away....
View 4 Replies
Sounds actually quieted down and my mechanic is thinking its more the alternator pulley.
View 5 Replies
I have a 2010 5-speed Golf 2.5L. Around 2 months ago after coming back from vacation, i noticed that when shift from 1st to 2nd and from 2nd to 3rd, there is horrible chatter/vibration coming from i assume the clutch/tranny. its been getting progressively worse and its at a point where i can hear the spare change rattle in the cup holder. the car had been sitting for a month, and i sort of "broke it in again" when i got back from vacation, not revving over 3 on the first tank, not over 4 on the second. It does have 100k kms on it, solid mix of highway and city. Is this something easily fixable, i dont have a warranty so i'd have to go aftermarket. Not down to pay two arms and 3 legs for something that could put me back in this situation yet again. if its the clutch id just go aftermarket with something a lot better, or if its the tranny id put a 6 speed in it, really lacking on the highway i believe. Or maybe it's something else.
View 7 Replies
I have 3.8k miles on my GTI, and recently started noticing this clutch chatter when my car is at a stop in neutral with the clutch engaged (pedal out). It goes away when the clutch is disengaged (pedal in). I'm not sure if the noise has always been there or not, but now that I hear it, it's really bothering me.
It doesn't affect driveability, and seems to disappear once the car gets moving. And it's usually not too bad, BUT sometimes the clutch engages in such a way that I get the rattle like in the second video. This is really the noise that makes me nervous. Does this sound like typical clutch chatter or do I possibly have a bad DMF and/or throw out bearing?
Car was taken to dealer today 3/7/14 and a new throw out bearing was ordered. I inquired about the possibility of it being a flywheel issue, and was told they wouldn't know that until they get into the transmission. So for now, car is schedule to have the throw out bearing replaced under warranty next week.
View 6 Replies
When pulling away casually in 1st from a stop, I hear a slight chatter noise. Had this since before the tune (stage 1). Almost like the sound a diesel makes at idle but only lasts a second or two. To the best of my knowledge it is an OEM clutch. Had 9k miles when I bought it, now has 25k.
View 24 Replies
I have a 06 plate Santa Fe 2.2 diesel and i think the cluch is on its way out, keeps slipping out of gear and the pedal itself is not aligned with the other two, mileage is about 79K i think.
View 4 Replies
I have a 1994 Geo Metro that I picked up a little over a year ago. I had to swap engines and replaced the clutch at the same time. This included a turned flywheel and new pressure plate. I also replaced all seals and gaskets except for the distributor O-ring and the head gasket. This included the crank and cam seals on the front and rear of the engine as well as the seal housing gaskets/oil pump gasket. I drove it for several months and then the distributor O-ring began to leak oil profusely which is a common problem with these cars. The distributor is keyed directly into the camshaft on the rear side of the engine so it sits sideways directly above the transmission/engine interface. Some of the leaking oil went right down into the clutch area. Being that adding a cup of synthetic oil every day was still cheaper than driving one of my pickups, I just kept driving the car until the new O-ring arrived and added oil. Once the O-ring was replaced, the oil leak stopped.
I had a couple episodes of clutch slipping not long after the leak was fixed and then everything seemed fine. I figured that some oil got down there and wore off after the clutch stopped slipping. The car drove fine for about a year until I began noticing the clutch slipping under load in 4th and 5th gear. I had some suspicions of this for a week or so before it became more obvious that the clutch was most definitely slipping. I have a new clutch kit and a spare flywheel that I plan to have machined in the next few days. I have been driving it a couple weeks around town and just babying it so the clutch won't slip.
I was also told by some that I should intentionally burn the clutch some to remove any glaze build up on the clutch disc or flywheel/pressure plate surfaces. They told me to put the parking brake on or put the front bumper up against a tree and burn the clutch. I originally figured this was a bad idea but decided to try it yesterday, figuring I had little to lose. I did it just until I began to see smoke and smell it and then stopped. I let everything cool off for an hour and then took the car for a drive. The clutch was no longer slipping at all so I am wondering if this fixed the problem for now or simply delayed the issue for a short while. I am sure I took some life off the clutch by doing this but....
View 10 Replies
I am searching for any kind of adjustment that might enable me to force the clutch level to the positive stop. It stands off about an 1/8" to 3/16" and I think is the reason I am not getting engagement in first gear, it slips heavily but fine in all other gears. The key way on the the lever prevents me from moving it a notch or two if I thought I could and don't know if that's even the answer . I can't figure out what is preventing it from returning fully on its own I can push it by and and a little fluid will squirt from the reservoir. Ive replaced the slave cylinder and bled it.
Is there any adjustment under the dash? This is a 2001 elantra that I just put a 2000 trans 5 speed.
My original plan was to pull the parts from the 2000 and replace in the 2001. I had lost 1st and 5th totally and found a 2000 that went right in with some minor mtr mnt mods. It shifts just fine except for this 1st gear thing. I saw a video and am having second thought about that move. I dont really want to pull the trans out again.
1st gear just keep slipping. new clutch kit installed when I swapped them out. It feels like a linkage thing somewhat but I cant find adjust ment to tryout.
View 4 Replies
