Gen 3 Prius (Audio/Electronics) :: Navigator Touch Screen Is Not Responding
Jul 18, 2015
The nav screen on my 2010 prius has recently stopped responding to touch inputs. All the function buttons seem to work, that is, the map displays and follows the car, the AM, FM, CD, setup, info-phone, dest,etc displays all show when called up but none of them can be changed or adjusted via the touch screen. Any way to reactivate it without pulling the whole unit, maybe resetting or rebooting?
View 7 Replies
Advertisement
I have a 2010 (IV) and the screen stopped responding to touch, I looked it up and seems like a common issue in the 2010.
View 1 Replies
Beginning yesterday, my touch screen and radio work only part of the time. It started with the radio just going silent for a few seconds at a time. Today, and this seems odd, I can mostly make it fail by starting car with foot on brake. I can mostly make touch screen and radio work normally by starting it with with foot off the brake. I considered fuse, which is unlikely, but... According to manual, touch screen and audio are on same fuse as clock, and clock is working fine.
View 2 Replies
When sitting in my life C with the power on listening to music there is no clock available on the touch screen. Any mods for this?
Nexus 7 ?
View 8 Replies
I have 2012 prius with touch screen display media center for the phone, not the navigation.
I iPhone linked to it.when you get in the car iPhone connects right away, no problems here, the problem is this:
If you have media center on phone mode, the contacts not always there, sometimes you see it, sometimes button is not highlighted and also when this happens dial pad goes away with contacts too. only thing I can push is speed dial. Phone works for speed dial, but that's it.
This can happen few times during my driving, sometimes more sometimes less, but for some ironic reason always not there when I need to use it.I try to enable or disable auto contacts update, that didn't work. And I have my iPhone updated, so I have new one now, and same problem, so its not the phone for sure.
View 3 Replies
I just rescued a 2005 base from the baking florida sun, sat for an unknown amount of time,paint shot,steering wheel cover falling apart both easy to fix so I was wondering if there is a plastic replacement screen for the MFD and where to get it....
Jump started the car,did some stop and go's to get the main battery to show a charge added some fresh gas then drove it 82 miles home..saying 52.2 MPG battery fully charged so I think its worth fixing the cosmetics.
View 6 Replies
Trying to connect a Garmin GPS with the car audio in Prius? It seems they could never connect. I have a Prius 2012 model.
View 1 Replies
Bought a 2011 Prius three just before the 2012s came out. Can the audio system in the 2011 be repalced with the 2012 touchscreen w/o nav and still function with the steering wheel controls?
View 6 Replies
I can change my nav system radio for just a radio? I am not smart enough to make the nav work and the light from the backup camera wipes out my night vision.
View 2 Replies
It has been more than 2 years and I am still very frustrated with the voice recognition. The problem is that the when I want to use the voice dialing, 90% of the time, the system interprets the number 4 as 0. But it will only mix up when the 4 appears in the area code. For example, when I say 416-123-4567, it will respond as 016-123-4567. Other numbers are responding correctly. In general, it is very unreliable in responding correctly to my number 4. My English is very fluent but with a very slight Chinese accent. The worst part is when I took the car and tried to show the problem to the service supervisor (with him in the car), the system will respond to my number 4 or 9 correctly.
Recently, I have bought my complaint to the dealer again. This time, the service supervisor who is also Chinese, told me that many Chinese customers have complained about the same problem. However, there is no software update on the system to address this problem.
View 15 Replies
Is it possible to disable the Touch Tracer Display?
View 3 Replies
I have a first-gen iPod Touch running iOS 3.1.3. When I got my Prius C 3 about 3 weeks ago, I was able to plug the iPod in to the USB and it worked great; album art, voice control, everything. A few days ago I finally decided to try out Entune by pairing with my Android phone. That worked fine, but ever since then I have been unable to use my iPod. When I connect the iPod it will sometimes start playing the last track that was active, but when I press Browse or try to change songs, I get a spinning disc image on the screen and it says "Loading" but never finishes. Also I noticed that when I connect the iPod it now says "Accessory Connected" on the iPod screen and asks me if I want to install an app, which it never did before.
If I had to take a guess, I'd say it looks like the audio system is trying to communicate with the Entune app on the iPod. However the Entune app isn't installed so it just hangs forever waiting for a response. And I can't install the Entune app because it requires a newer version of iOS than my device supports. Is there any way that I can get the audio system to go back to its previous behavior of treating my iPod Touch like just a regular iPod?
View 1 Replies
So, I had heard this was happening frequently and now my navigation screen has stopped responding to touch inputs.
It looks like my Lexus platinum extended warranty has paid it's self off!
For those that have had the entire central control module replaced by Lexus with (I assume a refurbished/manufactured) one, have they held up? Are the repaired units anymore robust than the originals?
My car is an 2008, has the weak connections to the touch screen been addressed in the later vehicle builds?
View 7 Replies
Just got my 06 Prius. The screen shows that Audio Off. The radio doesn't want to turn on. What could be the issue. 06 Prius with nav, Bluetooth, JBL etc. Everything else seem to work except the radio. Fuse perhaps?
View 3 Replies
Is there anyway to have the audio screen remain permanently on view? On my 2010 Prius, the screen view changes back to another screen after about 15 seconds. I would like the audio screen to remain on view so I can make changes between various presets. I know I can do this with the buttons on the steering wheel, but this may involve lots of button pushing. I also want to be able to flip between the presets and the text view (which shows me artist and song title.
View 1 Replies
Do not like having the nav screen always be on especially since we rarely use it. Would much rather look at the audio screen. How do I make audio screen default?
View 3 Replies
Is there a way to keep the screen on map and still have the audio show? I tried this with dual screen but it only appears to stay in maps when I do this. I find myself switching to audio often so I can see what song is playing on xm.
View 8 Replies
If you charge your iPod Touch using the USB port can you stream online music or other audio apps (Pandora/Stitcher etc.) via stereo Bluetooth or does using USB lock you into only playing music via the iPod interface?
I'm wondering if I would have to bypass the USB port and buy a cigarette lighter charger or can I just use the Apple USB cable at all times.
View 5 Replies
Cd player ceased working. Readout: "CD check" stays on screen. no CDs will play. Not a fuse.
View 7 Replies
Any way to see my iPhone 5 screen on the display of the car? I love the big screen mote than the tiny iPhone 5 screen.
View 2 Replies
I have a Prius v five ATP, my wife asked if its possible to leave the screen set to the radio. I haven't figured how to do this yet. I usually have the trip info displayed, but if I hit the radio button it brings up the usual screen displaying the radio info for a minute or so (or however much time that she's changing the stations) but then switches back to the previous screen.
Is there a way to set the radio as a default so it doesn't switch back to the previous screen? Or use the split screen function for this?
View 3 Replies
