On 2 occasions in the last week or so my GPS screen says "loading" on power up. It says not to turn power off as a status bar moves across screen. Never happened in the year Ive owned it, until now. A lot of personal settings get reset, including the time zone?
View 2 RepliesEverytime, I get into my V I play my various podcast (via iPhone). However, its takes about a minute (as compared to my wife's RX which connects instantaneously). Why it takes such a long time? Bluetooth is always on and its be "paired".
Also, when I turn off audio, the screen simply shows blue screen with "audio off". Is there a way that I can always default to the map screen instead of going to apps --> maps --> show map? Not a biggie, but a nice to have for me.
I have a first-gen iPod Touch running iOS 3.1.3. When I got my Prius C 3 about 3 weeks ago, I was able to plug the iPod in to the USB and it worked great; album art, voice control, everything. A few days ago I finally decided to try out Entune by pairing with my Android phone. That worked fine, but ever since then I have been unable to use my iPod. When I connect the iPod it will sometimes start playing the last track that was active, but when I press Browse or try to change songs, I get a spinning disc image on the screen and it says "Loading" but never finishes. Also I noticed that when I connect the iPod it now says "Accessory Connected" on the iPod screen and asks me if I want to install an app, which it never did before.
If I had to take a guess, I'd say it looks like the audio system is trying to communicate with the Entune app on the iPod. However the Entune app isn't installed so it just hangs forever waiting for a response. And I can't install the Entune app because it requires a newer version of iOS than my device supports. Is there any way that I can get the audio system to go back to its previous behavior of treating my iPod Touch like just a regular iPod?
I have a 2012 Prius and when i press "Map" it won't open. It is stuck on loading page and spinning icon.
View 8 RepliesJust got my 06 Prius. The screen shows that Audio Off. The radio doesn't want to turn on. What could be the issue. 06 Prius with nav, Bluetooth, JBL etc. Everything else seem to work except the radio. Fuse perhaps?
View 3 RepliesWhenever I start my car the default screen is the map, whether I am using nav or not. Is there a setting somewhere where I can make the audio the default screen?
View 4 RepliesI tried installing a backup camera today. big mistake. When I start the car the yellow triangle shows up. and warning says check hybrid system. I try and put the car in reverse and I hear a snap, it slips to neutral and a warning appears that says put into P position. The only wire I tapped into was the red reverse light camera. I even tried undoing the install and I get the same messages.
View 18 RepliesMy MFD now only shows the Toyota Logo, whatever I do. Also, I cannot play music. The trick with pressing (hold) INFO and headlights three times does not bring up a diagnostic screen. My theory is that the MFD is waiting for some signal over the network before showing the usual screen (and it never gets that signal). Some years ago, I had a third party fit a new audio tuner and player (non-Toyota), and that worked more or less fine for years.
They had to leave the old faulty Toyota audio in the circuit to make it all work, and they said to leave the graphic equaliser on even settings, and then forget it. The old Toyota audio CD changer had failed, but the rest was OK. My 'guess' is that they had to leave the old audio device connected because it terminates the AVC-LAN with a 60 ohm resistor. Maybe that connection came off, and now the LAN signals are not good, and the MFD is locked up 'always waiting' for the signal from an ECU.
I Learned on a Toyota Avalon web page that you can force your audio system to reboot itself by pressing the power button for three seconds. On the Avalon, it only works on the "Limited" levels. I tried it tonight on my Prius Four and it worked. Great to use when your audio gets "confused" and you just want to clear it and start over.
View 1 RepliesWhen my 2012 Prius II has audio in aux mode, for using the 3.5 mm aux audio jack, a super-loud and annoying buzz is created when I plug my laptop's power supply into the car via a 12V DC to 115V AC power converter plugged into either of the car's 12V aux power jacks.
I'm trying to listen to video lectures on DVD played on my laptop, feeding audio from my laptop to the car (2012 Prius II) using the 3.5 mm aux audio jack. I get clear sound when the laptop is running off battery. However, when I plug a 12V DC to 115V AC power converter into one of the 12V aux power jacks, there is a quiet and slightly annoying buzz.
When I then plug my laptop's power supply into the power converter (whether or not my laptop is connected to its power supply), the buzz's loudness and annoyance get magnified 10-fold, even if nothing is plugged into the aux audio jack. If the Prius audio mode gets switched to USB mode (with no input from the laptop), there is no buzz, so this seems particular to aux mode audio. (I cannot drive the car's audio from a video player on my laptop via USB mode, can I?)
I thought I remember reading a warning about this buzz and someone had a workaround, possibly involving some extra interface, but my searches on this forum aren't turning up anything. I plugged a surge protector into the power converter and got a mid-volume buzz, which went back to a full-volume buzz with the laptop power supply plugged in.
Have a 2010 Prius V, and use a smart phone with a vent mount above the radio. So far so good, however the dangling power cord I'd like to minimize. Presently, I have a tiny cigarette lighter to usb converter located under the shifter (in that odd open bay), and then the cord travels up the entire dash.
Would like to run the cord behind the dash and, if possible, have the cord pop through the air vent to power the phone. That said, would not want to interrupt air systems by puncturing through the duct and am not familiar w/the schematics to understand what options exist under the dash. Prefer not to drill through the dash, but would consider. Second, but lower priority, would be to hardwire the cable inside the dash.
Best spot I can locate as an exit for the power cable might be the space just outside the air vent, but still inside the vent cavity. have links to the dashboard schematics to get an idea of available space?
If I plug in my IPhone 4 using the USB cord plugged into the receptacle under the armrest (how you plug in to run the wonderful entune ) the pictured notification intermittently and quite often pops up. This stops my phone from charging and is annoying as it makes the dinging sound every time and I have to unplug / re plug it in and hope that it starts back up charging. Does the little lightning bolt that signifies that the phone is charging must be on for entune to work, or does it only have to be plugged in??
Now I do recall somewhere hearing that the USB is not the optimal way to charge a phone, and I'll admit when it does work it charges real slow. Thing is that's the only way to run Entune and there is only one plug on the cell phone? I could charge the phone via a cigarette lighter charger but then I can't use entune!
I have a 2010, Prius III. Whenever I plug my blackberry storm into the usb slot, my phone says "there is not sufficient power to charge the phone". I've tried charging with the Storm 1 and Storm 2 but neither seem to work. I have plugged in my ipod and it seems to charge just fine. Is it just the phone that won't allow it to charge or is it the fact that it's a micro usb that the car may not be able to handle? Or maybe the usb port is faulty.
View 1 RepliesStrange occurrence the other day that I have not been able to remedy. The volume/power button that can pop in & out on the dashboard hadn't been used of late but when I went to depress it, the button popped out. It is spring loaded and the knob itself has an end that is cut into quarters - persumably to fit into the female end within the JBL stereo unit itself. But can't figure out how to get it to stay in place as it continues to pop back out. Volume & power functions still work but button/knob won't stay in.
View 1 RepliesI recently bought aftermarket CCD camera kit from eBay for my 2014 Prius-II and got it installed by best-buy geek squad. But camera is not working due to power problem. According to best buy technician, Prius factory harness is not supplying power when car is put in reverse gear. I am not sure how to address this problem.
View 9 RepliesWhen I plug my iPhone into the USB port sometimes a message pops up that says "The accessory uses too much power and will be turned off" Then a few seconds later my phone will stop charging, but then within a matter of seconds it will charge again and go on and off like this each time giving me the error message.
2012 C- Three
Can Display Audio's phone interface accept pauses or waits (P or W) in the phone number? My phone uses them for voicemail passwords, eg dial the number, pause a few seconds, and then dial the password. So far it does not work at all through the bluetooth interface when initiated through voice command ("call xxx xxx xxxx pp yyyy#") or through the car's screen. I tried to directly store a similar number into the Display Audio "stored" numbers but could not find an option for the P pause.
View 6 RepliesI've been using MP3 CDs in autos for some years. Now I have a 2014 Prius 4 with whatever audio system is standard in that model. Generally all is good. But there is one odd thing: Whenever I stop the car, or it seems even pause the playback, it seems to restart so as to replay a few minutes I listened to on the last session.
View 1 RepliesI presently use a 16GB USB drive that has about 240 MB of 2 to 10 MB mp3 files and it works well. The reason I ask is that SirisXM is going to drop my favorite channel (69) and I was thinking of making some large files of audio capture before it goes away. Large because its easier to make and play a few than many. There might be a file size limitation (not USB storage limitation) due to the amount of memory in the audio system.
View 8 RepliesSometimes in the bright sunlight, I cannot see the audio display or the small AC display that shows which vents the air is coming out from. Is there any way to illuminate these displays? Will some LEDs around them work or make it worse? I'm driving a C two. I have no intention of upgrading to an aftermarket sound system; I just want a simple inexpensive way to see the info on the screen.
View 3 RepliesTrying to connect a Garmin GPS with the car audio in Prius? It seems they could never connect. I have a Prius 2012 model.
View 1 Replies