Gen 3 Prius (Audio/Electronics) :: 2010 Wire To Install External Display IPod Adapter?
Feb 3, 2011
I want to install an external display ipod adapter (Kenwood KOS-A300) in my 2010 Prius IV, but in reading the manual I see that the power wiring for this device requires 3 connections - Ground, Ignition, and Battery (it also has a dimmer control wire, but I am hoping that one can be left disconnected).
I haven't come across an accessory like this before - usually they just need 12v and ground and in these cases I just tap into the wiring for a 12v accessory power outlet to get these connections. My recollection in this car is that the accessory power outlets are switched (either with ignition "on" or accessory "on"), and they turn off when the car is shut down.
Is there a convenient location inside the vehicle where I can connect a wire that is always hot with 12 volts?
View 10 Replies
Advertisement
iOS 8.4. When I turn on my car it will not detect my iPod. The only way to get it to detect it is to shut the car off and turn it back on. Also it no longer will resume to where my iPod left off when shutting down the car. Having problems with iOS 8.4?
View 2 Replies
When I am listening to songs from iPhone there are buttons on my head unit (C2 radio NOT nav system) for play/pause, fwd, rewind BUT the rewind and fwd buttons only forward through the song it's playing (like you used to be able to do with cassette tapes) and it does NOT skip to the next song. How stupid is that? I have never seen a digital audio player that did this, the fwd/rewind always skip back a song or fwd a song BUT the prius head unit only skips through the song itself.
View 6 Replies
I've got a III and looking to put on an external GPS unit. I have looked over my dash every time I drive and thinking the texture doesn't allow suction cups to work. How do you mount ?
View 19 Replies
I started my Prius and the Navigation Display open on it's own without me touching any buttons as though it wanted me to load a CD. Now it is stuck in the open position and the CD player is making noises like a CD is stuck but do not have a CD in the player.
I have hit every button to try to get it to close, no luck. It is stuck on the FM station I was listening to and will change stations or to AM, CD, SAT. I turned the car on and off several times just stuck open.
View 1 Replies
I use an USB drive with my other radios. Is there a way to get an adapter to allow a USB drive to talk to the Prius radio, without going the IPOD route? Don't have an IPOD but plenty of USB's with music...
View 1 Replies
Any way to play videos from an iPod connected via cable or from an iPhone connected via Bluetooth? The owners manual mentions that it will play the audio from a video that is on an iPod.
View 14 Replies
I've been having a few problems with keeping my ipod connected with Entune. I was working fine but lately the ipod screen keeps saying loading. Then when I switch to another source like FM, then back to Ipod, I also get a "Function not available" screen. The only thing that has fixes this is to hard reboot my ipod, and turn off the car and restart.
View 1 Replies
I have a 2012 Prius 4 and my USB-connected iPod skips. I've tried 2 different USB cables and 3 different iPods. I also tried the vehicle in different driving modes (ECO, Power, EV) and the iPod skips every time. However, the iPod works perfectly when using the aux jack.
I took the car to the dealer and they applied a software update but the skipping persists. The dealer tried the iPod in another 2012 Prius and it skipped. They admit there is a problem but the dealer says nothing can be done until Toyota technical support gets enough complaints that they come up with a fix.
View 6 Replies
I have a first-gen iPod Touch running iOS 3.1.3. When I got my Prius C 3 about 3 weeks ago, I was able to plug the iPod in to the USB and it worked great; album art, voice control, everything. A few days ago I finally decided to try out Entune by pairing with my Android phone. That worked fine, but ever since then I have been unable to use my iPod. When I connect the iPod it will sometimes start playing the last track that was active, but when I press Browse or try to change songs, I get a spinning disc image on the screen and it says "Loading" but never finishes. Also I noticed that when I connect the iPod it now says "Accessory Connected" on the iPod screen and asks me if I want to install an app, which it never did before.
If I had to take a guess, I'd say it looks like the audio system is trying to communicate with the Entune app on the iPod. However the Entune app isn't installed so it just hangs forever waiting for a response. And I can't install the Entune app because it requires a newer version of iOS than my device supports. Is there any way that I can get the audio system to go back to its previous behavior of treating my iPod Touch like just a regular iPod?
View 1 Replies
2007 Prius with Nav System. Do I need a special cable to use the AUX jack in the arm rest? I have cable I tried to use and I show an AUX connection, but I get no sound out of the system.
View 1 Replies
Just bought a 2012 Prius 3.
Ipod music cuts in and out intermittently. Sometimes it will go 30-45 minutes without cutting out, other times it will happen much more frequently. At first Toyota did not want to admit there was a problem and made me come in a number of times to look at it. I tried different cables and ipods.
View 2 Replies
I just tried my iPod mini with the 3.5 mm audio cable and there is major hissing like you can't even hear the music. All the songs on my iPod are high audio quality. When I plug it in my Lexus via the same cable no issues. Can the dealer fix it?
View 6 Replies
I have an RCD-510 (touchscreen with no Nav) in my 2010 wagon. I have the AUX in the center counsel but want to add the iPhone adapter in the glove box. I'm having issues with VW by me. They cannot figure out what I need. They took it apart once and said there was no hook for the iPod cable. Also, I talked with VW headquarters and they said they wouldn't recommend trying to do it as I'd need new wire harnessing and a new "panel.". I was very confused by the panel comment. What is the part number I would need them to order?
View 9 Replies
I found a few threads on this forum talking about skipping problems with ipods. Has there been a fix for this yet? I have a 2012 Prius Three and an ipod classic 80 gb from 2006. I'm not able to use voice commands because it says that the ipod is still syncing. If I play a song it will pause for 1-2 seconds randomly during the song, maybe 1-3 times per song. It's extremely annoying. It doesn't matter if I'm driving slow, fast or parked.
View 5 Replies
If you charge your iPod Touch using the USB port can you stream online music or other audio apps (Pandora/Stitcher etc.) via stereo Bluetooth or does using USB lock you into only playing music via the iPod interface?
I'm wondering if I would have to bypass the USB port and buy a cigarette lighter charger or can I just use the Apple USB cable at all times.
View 5 Replies
Just got a new 2012 Prius II today. Got in the car with my iPod "splitter" cable adapter (on one end it has the ipod connector and on the other end is the USB & Auxillary cables), my 6th gen ipod nano, and hooked it up only to find that the Audio info was not connecting to the screen. I found that you do not need this "splitter" cable, all you need is your ipod adapter. You can use the that auxillary cable for a Walkman or something ! Glad, I figured it out the first day or i'd be pissed trying.
View 1 Replies
Can Display Audio's phone interface accept pauses or waits (P or W) in the phone number? My phone uses them for voicemail passwords, eg dial the number, pause a few seconds, and then dial the password. So far it does not work at all through the bluetooth interface when initiated through voice command ("call xxx xxx xxxx pp yyyy#") or through the car's screen. I tried to directly store a similar number into the Display Audio "stored" numbers but could not find an option for the P pause.
View 6 Replies
I have an IPhone 6s and an old iPod touch.
I have to connect the iPhone 6s for Entunes and I would like to use my iPod touch to access my music library.
How to make usb sync/ charge splitters?
View 4 Replies
Sometimes in the bright sunlight, I cannot see the audio display or the small AC display that shows which vents the air is coming out from. Is there any way to illuminate these displays? Will some LEDs around them work or make it worse? I'm driving a C two. I have no intention of upgrading to an aftermarket sound system; I just want a simple inexpensive way to see the info on the screen.
View 3 Replies
Just got a 2012 c3, and I'm trying to get my iPod Nano (4th gen) to show up on the display as an iPod, controllable from the steering wheel and display. The manual says this iPod model is compatible. The iPod software is up to date.
If I plug my iPod into the AUX with a standard audio cable, it plays over the speakers fine but the display shows only "aux" and has no controls for it. If I plug it into the USB with an Apple cable, it doesn't plays over the speakers at all, and the USB doesn't show up as active on the display -- it's grayed out. I tested the cable elsewhere and confirmed it's fine.
View 7 Replies
