iOS 8.4. When I turn on my car it will not detect my iPod. The only way to get it to detect it is to shut the car off and turn it back on. Also it no longer will resume to where my iPod left off when shutting down the car. Having problems with iOS 8.4?
View 2 RepliesI want to install an external display ipod adapter (Kenwood KOS-A300) in my 2010 Prius IV, but in reading the manual I see that the power wiring for this device requires 3 connections - Ground, Ignition, and Battery (it also has a dimmer control wire, but I am hoping that one can be left disconnected).
I haven't come across an accessory like this before - usually they just need 12v and ground and in these cases I just tap into the wiring for a 12v accessory power outlet to get these connections. My recollection in this car is that the accessory power outlets are switched (either with ignition "on" or accessory "on"), and they turn off when the car is shut down.
Is there a convenient location inside the vehicle where I can connect a wire that is always hot with 12 volts?
When I am listening to songs from iPhone there are buttons on my head unit (C2 radio NOT nav system) for play/pause, fwd, rewind BUT the rewind and fwd buttons only forward through the song it's playing (like you used to be able to do with cassette tapes) and it does NOT skip to the next song. How stupid is that? I have never seen a digital audio player that did this, the fwd/rewind always skip back a song or fwd a song BUT the prius head unit only skips through the song itself.
View 6 RepliesI use an USB drive with my other radios. Is there a way to get an adapter to allow a USB drive to talk to the Prius radio, without going the IPOD route? Don't have an IPOD but plenty of USB's with music...
View 1 RepliesAny way to play videos from an iPod connected via cable or from an iPhone connected via Bluetooth? The owners manual mentions that it will play the audio from a video that is on an iPod.
View 14 RepliesI've been having a few problems with keeping my ipod connected with Entune. I was working fine but lately the ipod screen keeps saying loading. Then when I switch to another source like FM, then back to Ipod, I also get a "Function not available" screen. The only thing that has fixes this is to hard reboot my ipod, and turn off the car and restart.
View 1 RepliesI have a 2012 Prius 4 and my USB-connected iPod skips. I've tried 2 different USB cables and 3 different iPods. I also tried the vehicle in different driving modes (ECO, Power, EV) and the iPod skips every time. However, the iPod works perfectly when using the aux jack.
I took the car to the dealer and they applied a software update but the skipping persists. The dealer tried the iPod in another 2012 Prius and it skipped. They admit there is a problem but the dealer says nothing can be done until Toyota technical support gets enough complaints that they come up with a fix.
I have a first-gen iPod Touch running iOS 3.1.3. When I got my Prius C 3 about 3 weeks ago, I was able to plug the iPod in to the USB and it worked great; album art, voice control, everything. A few days ago I finally decided to try out Entune by pairing with my Android phone. That worked fine, but ever since then I have been unable to use my iPod. When I connect the iPod it will sometimes start playing the last track that was active, but when I press Browse or try to change songs, I get a spinning disc image on the screen and it says "Loading" but never finishes. Also I noticed that when I connect the iPod it now says "Accessory Connected" on the iPod screen and asks me if I want to install an app, which it never did before.
If I had to take a guess, I'd say it looks like the audio system is trying to communicate with the Entune app on the iPod. However the Entune app isn't installed so it just hangs forever waiting for a response. And I can't install the Entune app because it requires a newer version of iOS than my device supports. Is there any way that I can get the audio system to go back to its previous behavior of treating my iPod Touch like just a regular iPod?
2007 Prius with Nav System. Do I need a special cable to use the AUX jack in the arm rest? I have cable I tried to use and I show an AUX connection, but I get no sound out of the system.
View 1 RepliesJust bought a 2012 Prius 3.
Ipod music cuts in and out intermittently. Sometimes it will go 30-45 minutes without cutting out, other times it will happen much more frequently. At first Toyota did not want to admit there was a problem and made me come in a number of times to look at it. I tried different cables and ipods.
I just tried my iPod mini with the 3.5 mm audio cable and there is major hissing like you can't even hear the music. All the songs on my iPod are high audio quality. When I plug it in my Lexus via the same cable no issues. Can the dealer fix it?
View 6 RepliesI found a few threads on this forum talking about skipping problems with ipods. Has there been a fix for this yet? I have a 2012 Prius Three and an ipod classic 80 gb from 2006. I'm not able to use voice commands because it says that the ipod is still syncing. If I play a song it will pause for 1-2 seconds randomly during the song, maybe 1-3 times per song. It's extremely annoying. It doesn't matter if I'm driving slow, fast or parked.
View 5 RepliesIf you charge your iPod Touch using the USB port can you stream online music or other audio apps (Pandora/Stitcher etc.) via stereo Bluetooth or does using USB lock you into only playing music via the iPod interface?
I'm wondering if I would have to bypass the USB port and buy a cigarette lighter charger or can I just use the Apple USB cable at all times.
Just got a new 2012 Prius II today. Got in the car with my iPod "splitter" cable adapter (on one end it has the ipod connector and on the other end is the USB & Auxillary cables), my 6th gen ipod nano, and hooked it up only to find that the Audio info was not connecting to the screen. I found that you do not need this "splitter" cable, all you need is your ipod adapter. You can use the that auxillary cable for a Walkman or something ! Glad, I figured it out the first day or i'd be pissed trying.
View 1 RepliesI have an IPhone 6s and an old iPod touch.
I have to connect the iPhone 6s for Entunes and I would like to use my iPod touch to access my music library.
How to make usb sync/ charge splitters?
I have an iPhone 5S and whenever I plug it in to my car it automatically switches to the iPod input and starts playing tracks in alphabetical order, though sometimes it remembers to continue playing whatever I had playing on my phone before. This is rather annoying because I'd rather the car stay in whatever input mode I had it, and if I do switch to iPod or Bluetooth, I want it to *always* remember to play what I was playing before, even if it's Pandora and not "iPod" music. Is there a way to configure the JBL system to do this? Or at the very least stay in its current input mode until I manually switch it?
View 3 RepliesI've got a 2010 Prius IV that I got back in July of 2010. My car's only option is the navigation system. I have not made any modifications to the car, with the exception of tinted windows.
View 2 RepliesOur 2010's NAV head has recently begun throwing fits. Sometimes it's hard to get it into route planning mode via the touch panel. But, what's more prevalent is when the "hard" buttons are pressed the unit does other things, most often, for example, is that the "map" or other hard button is pressed and instead of the screen going where it's supposed to it'll switch radio stations.
Nothing foreign has been spilled, stuffed, or crammed into it. The car is garaged. Any way to do a hard reset?
I just got an iPhone 5 and I can't seem to get it to play anything via the USB on the JBL in my 2010.
Is there anything special I need to do to get it to work?
My 2010 Prius, package IV is only 2 1/2 years old, but I'm at 46K miles.
My factory NAV system has worked fine, but last week when I tried using it, the display said "Map read error", or "Can't read map" (something like that). I ejected the map disc (ver 8.1), cleaned it, reinserted, and got the same error.
My friend also has a '10 Prius, so he let me try his disc. He's got ver 9.1. When I loaded it, the map came up on the display, but the system locked up when I tried to do anything. I had to restart the car, but when I tried again, the same lockup happened with his disc.
Is there anything special I need to do when loading a new DVD map version? Is there any chance it's NOT the actual head unit that's now bad? Is there any chance my dealer would cover this even though I'm over 36K miles, but not over 3 years?
Navigation system fails to read DVD when it heats up on my Prius IV. Works fine when cold at start up or when air conditioner is running in warm weather. Now that it is cold outside and a heater is necessary, it will intermittently fail to read the DVD. This is an updated DVD. The old DVD had no problems but I have since dumped it. Do I need to replace the new DVD?
View 1 Replies