Gen 2 Prius :: Changing Shift Knob To Buttons?
May 11, 2010
I originally wanted to change my shift knob...... but now, I am thinking of changing the whole thing to buttons.... *it's "fly by wire" anyways right?
as an example, how about fab'ing in the buttons from a tesla roadster? here's a pic ...., (it's a tight fit inside the car!)
View 17 Replies
Advertisement
Do the cover on the stock knob can be taken apart, smoked, and put back together?
View 6 Replies
This morning the Shift Knob made a click every time I selected a gear, for about an hour, then it went away.
It was colder than almost ever here (Berkeley, CA) last nite, 30F. But there was no click back in '05 at 10F (in Prudhoe Bay, AK).
Mechanics (even the dealership!) say not to worry--probably a plastic part--just advised me to shift gently.
View 4 Replies
In the sticky post on the LED lights and how to change them. I was able to open the radio and removed the 8 green caps that was covering the radio's blue LEDs. I love the result.But the front of the HVAC knobs still shows the retro cyan color. I think it's the same blue LED with the green rubber cap over it. I tried opening it but failed. I didn't want to break anything. I want to go back and take a look at it again.URL...(Yes, the neo wedge bulb on the HVAC position indicator (left-most; Off, Low, ..., High) is out, I need to order some more. Originally, they were orange I think. I prefer blue. The green indicators in front are working fine.)
I had the bulbs replaced more than a year ago, but now I'm tired of looking at the retro cyan color. How to open it without breaking the parts inside?After unscrewing and taking the center console out of the car, I am able to isolate the radio unit from the HVAC controller unit and open it to reveal the circuit board, but I could not separate the HVAC knobs from the board. I don't know if the HVAC are soldered to the board or not, so that's where I stopped.
View 3 Replies
I have a 2008 Elantra GLS with approx 60,000 miles. Recently, without fail, a buzzing sound occurs when changing the vent control knob from floor to vent and vice versa. The sound lasts for about 2 seconds and sounds like it may be coming from the area behind the steering column. All the climate control systems work fine and the buzzing noise only occurs when changing the vent setting. At this point it is just a nuisance as everything seems to be working fine, but in my searching of the forums can not seem to pinpoint what the issue may be.
View 1 Replies
First the wife crushes the underbody on a huge rock cutting a corner. Now she spilled a whole pop down the shift lever, and its glued shut - it will hardly move. I know how to get the console off, but How do I take just the 'shift knob' off? I need to get the flexible piece underneath it off so we can wash all the parts.. I have the upper console part off.
View 11 Replies
The other day the plastic top piece of my shift knob broke off (that had the shift pattern painted on it) and it made me once again want to replace the stock shift knob. I was considering buying one, but other than TWM I can't find any that I really like, so I want to machine one myself. My biggest problem in planning right now is what metal to use, SS is nice but expensive, and how to attach it to the leather and the stick. The only way I can think of attaching it to the stick is with set screws which would be hard to drill.
View 1 Replies
This has been bothering since the day I got my R. When im in 6th gear and let off the throttle I notice my shifter jolt a bit. Is this normal?
View 12 Replies
I've got a 2001.5 v6 passat w/ auto and my shift knob has this cool burl veneer on it. I think it's real wood but it's pretty thin and it's got cracks on the front and the back. I can't see any simple way to remove the stick so that I can try to glue it. How to do that. But it's a standard tiprtonic shifter ... probably the standard on that model.
View 3 Replies
I went to the golf ball, but I am thinking of going back to OEM. Looking for a heads-up about the process?
View 6 Replies
I am trying to remove the shift knob and the steps are entirely different than the DSG knobs from the GTI; You take just the boot off (not the assembly) then underneath is a hose clamp which needs to be removed. (this is not on the GTI version); I cannot figure out how to get this clamp off; I guess you need hose clamp pliers? And then do you need a new hose clamp? Won't it ruin the clamp?
View 24 Replies
How to remove the OEM "golf ball" shifter on a 20th AE? I tried everything but it still won't budge. Is there a trick to removing it? Is it a tight press fit or does it screw on?
I have the latest edition of the Bentley repair manual and it does not cover this shifter knob.
View 14 Replies
how to change an automatic shift knob. Im interested in getting a momo automatic shift knob.
View 4 Replies
I was looking through the DIY and I couldn't find one that just removes the knob it self. I know its all the same steps to remove everything but everyone just swapped the boot and everything. I want to keep my boot and just change the knob to a solid glass ball.
View 1 Replies
I need the PASSAT B5 shift knob part number...
View 1 Replies
I recently purchased my R32 and the previous owner installed a short throw shifter. The knob and aluminum ring look like they are installed correctly but the boot won't stay up next to the aluminum ring. I originally thought that it would just either snap into place or it would need to twist to lock it into place. I've looked at and I can't figure it out. How it is supposed to attach to the aluminum ring?
View 4 Replies
I am experiencing a very weird issue ... at least in my opinion with my DSG on my 2012 mk6 GTI. I am not sure if this is the DSG "clunk" but when parked uphill/downhill and going from P to R the shift knob is very hard to move. When switching it, it almost sounds like there is some metal grinding. This happens when the car is parked once again uphill/downhill in 99% of the time. There is some very rare instances when the DSG acts the same way when i park it on a leveled street but extremely rare once again. Should I be worried? The DSG has been a great transmission so far, no issues what so ever except VW's flash.
View 10 Replies
How is this done?
View 5 Replies
I have a 2011 elantra a 6 speed manual and im trying to take off the shift knob and can't seem to do it....
View 33 Replies
I'm new to this and not really sure if I'm doing it right. I need to know how to take the gear shift knob off my 2008 santa fe.
View 3 Replies
How Do You Remove Gear Shift Knob For Replacement ?? On My 07 Azera
View 2 Replies