My 1.8t gli is giving me this issue, when braking (specially hard) my steering wheel shakes side to side, my rotors got changed less than 20,000 miles ago (all of them) and they seem fine right now.
Could this be my Tie Rod ends? The car has 110,000 miles on it, and i know some bushings if not all need to be changed, which I am gonna be installing when i put on the Raxles i just got.
I am currently running 8mm ECS spacers in the front and 17.5mm ECS spacers in the rear. My Summer set up is still stock BBS RC's, but my winter wheels are Lenso's.
Last winter was my first winter running with the Lenso's and had no issues. This past weekend I swapped out the BBS's for the Lenso's, and now I am feeling vibration above 60MPH. I felt no vibration with the BBS's. I just took them in to get balanced (maybe a weight fell off-idk), and they were within 1/4 of 100% balanced. They then thought it may be the spacers I'm running so they cleaned them up, but said that it didn't work.
My alignment is also spot on-so that's not an issue either. I am at a loss as to what would make me feel that vibration after just changing out the wheels.
I have a 05 gli w/ 65k miles. I got new plugs gaped correctly and new coils. When I'm idling at 7-800rpm my steering wheel shakes a little and when I flip on the ac it's even more noticeable. So much the rear view mirror shakes just a tad. What do yall think it could be cause it's not that bad but I'm anal about my cars and I want it to be perfect.
View 11 RepliesI got an 04 GLI ... When I'm driving at about 60 mph, and I apply the brakes lightly, i get a vibration in the steering wheel. it doesn't happen under heavy breaking, just when i press the pedal down lightly to slow down, and there is NO pulsation in the pedal at all during any time.
Some history of the car:
Just did pads and rotors 2 weeks ago,
car has spacers, hub centring.. the problem occurs with out the spacers also.
had an alignment a month ago.
had tires balanced 2 months ago
tires are 2 months old.
700 miles ago I got new brake pads on all 4 wheels and new rotors on the rear wheels. 700 miles later the steering wheel still shakes when braking at above 60mph speeds. Also there is still a squeak sound coming when braking. Do I need to give the new brakes and rotors more time to adjust or were they installed wrong?
View 7 RepliesI have a 2007 Acura TSX with 117k miles. We had the rotors and pads replaced in July of 2014 at Midas (won't go back there again!). Anyway, we are getting a pulsating in the steering wheel (shaking) when braking at times. Sometimes it is much more noticeable than others. This started shortly after having the pads/rotors installed. I took it back to Midas, and of course they couldn't duplicate the issue.
So, here's my question, can we continue to drive the car until it needs new pads (then I'll change the pads and rotors)? I know that the steering vibration can be annoying at times (it's not AWFUL, but you can tell that they're warped). I really hate to have to replace both right now as money is pretty tight with buying a house.
Lately my 2007 GX470's steering wheel has a shaking/vibrating problem whenever I apply the brake at speed above 50 mph or so. Without braking or with braking at slower speed, there is no problem at all -- everything is glass smooth.
1. I assume the front brake rotor is warped?
2. Will I need to change the rotor or is there a way to fix the warp (it that's the problem) without changing the rotor?
3. Approximate part & labor cost?
I plan to bring to dealer for a check up but would like to know ahead of time what to expect.
Under acceleration between 65-80 on the highway I get a serious vibration in my steering wheel. I can feel it in the floor of the car too. When I let off the throttle it goes away. I have new tires, wheels, and new axles too. I thought it was the inner cv's but i was wrong. I was thinking possibly motor mounts, but I am not 100% sure. Specs 2004 Jetta GLI, ecs 10mm spacers in the front, coilovers dropped 2 inches, otherwise everything else is stock in the bushing mount department.
View 11 RepliesMy steering wheel controls stopped working over night (horn also). When i went out this morning i was not able to get into the car using my key fob.
I hooked up my vag-com and got 2 codes.
00955 - Key 1
09-10 - Adaptation Limit Surpassed - Intermittent
00956 - Key 2
09-00 - Adaptation Limit Surpassed
My key is working again, but my horn and volume controls...ext do not work.
The center of my steering wheel rattles (part that you press for your horn) is there any way to tighten this?
View 4 RepliesJust threw some steelies on my car for winter mode. I was told they were in balance but I'm having a weird issue.
Steering wheel shakes when you approach 60+, but with varying severity. It will shake hard one minute, and then soft the next.
I also found that stepping on the gas makes it shake, and letting off the gas (coasting down) makes it stop.
Is this an issue with the wheels, or something in my drivetrain. I never really noticed it with the RC's.
I just got the brakes done and a weird thing is happening: I upgraded with adams rotors, ebc red pads, ecs ss lines, tyrolsport bushing stifenning kit.
Whenever I try to brake from 40+mph to 0 the steering wheel vibrates a lot. What can be the cause of it?
Trying to get my car all fixed up for winter, but my steering wheel has a vibration.
When on the highway, it gets worse/faster with accel. and when i let off the gas and coast, it almost goes away... does not change (better or worse) with braking.
Specs - Dropped on koni coils, 2 diff sets of rims (one brand new, one came with car same problem with both sets), spacers all around, everything else stock...
I searched and found a diy on how to change and flush the power steering fluid. I changed it on monday and a week later the same supercharger noise occurs when moving the steering wheel, My queastion would be what can the problem be and how i go about in finding the problem on my 20th ae 1.8t.
View 5 RepliesWell I've been noticing that when I'm slowing down from higher speeds (50 mph or so) my steering wheel is shimmying a bit. Also I just started to hear my front passenger brake squeal a little. Well when I went to visually check the brakes, the pads seem VERY thick! Is it normal for them to start to go bad even with such thick pads? They are like 1cm thick. Also the rotors did seem used for sure, maybe 1mm worn down or so from the outer lip which is raised (I hope you understand what I mean), but they weren't scoured or anything. I suppose they could still be warped? I figured with such big brakes I wouldn't run into that problem. The car has 70k on it and the pads have been replaced once and rotors turned at 25k by the previous owner.
View 6 RepliesWhenever I go over about 50 MPH it starts shaking like the dickens. We have a lot of snow around so I'm thinking i just have messed up alignment from hitting snow chunks but who knows. [URL] ....
View 6 RepliesMy 20th Gti is shaking. So when I accelerate to about 80mph and then let off the gas it the front end will start shaking and once I tap on the gas a little it will stop. Why is it doing this and what is it that has gone bad?
View 16 RepliesI don't think I am in the right forum but I don't know where to post it. I have a 20th and when the car idles it shakes a little but when I take off the car rumbles alot the only way not to make it rumble is rev it to 1500rpm what can it be causing this?? I have a catback tt exhaust can it cause it to do it?
View 1 RepliesI have a 2003 20th anniversary edition GTI. Yesterday I noticed my car started shaking when I was driving on the highway. The only thing I can think of that I did was run into a snow bank during the snowstorm. What is causing my car to shake?
View 2 RepliesI have a 2004 gli and there r no lights an no codes but when I am driving the car shakes a little almost if the motor was bogging down a little. its nothing to major just a slight back and forth movement. I cant seem to figure out the problem it seems to go away during acceleration. Also one other thing is it seems to do it worse when its warmer!
View 1 RepliesI recently installed my 3" GHL exhaust along with my stage 1 BFI dogbone and I recently noticed a very faint rattle when I am engine braking. I can only hear it when there's no cars around or when its quite. but i cant figure it out. (I still have the stock exhaust heat shield in from the cat back so I am not ruling that out as a possibility).
View 1 Replies