GTI 337/20th Anniversary :: Shifts Are Getting Too Much Notchy
Jan 19, 2013
So a year ago I installed the Stigma SS and I loved it, one of the best mods i've done to my car. However my love for it is decreasing. The notchy shifts are getting a little too much for me. Due to the winters here in Colorado, the cold makes it very hard to shift, notchy as hell, and first to second shift is very resistant when the car is first started. Even in the summer, it seems more difficult to get nice smooth shifts around town because of the resistance going into gear, it's just not as bad.
View 3 Replies
Advertisement
Just did my clutch yesterday and now I'm having some linkage issues. 1-4 shifts smooth, but 5th is a little tight and I can't get into 6th. I feel like the shift linkages may be a little messed up.
View 14 Replies
Recently bought a black 20th for my girlfriend for Christmas. Any ways, so I floored it from a dig, and the ASR light kept coming on during acceleration and shutting off between shifts, just wondering what the situation is.
View 24 Replies
After the car has been sitting all night in the cold 20 degree weather, it is notchy when I upshift into third from second. I already swapped out the manual trans fluid with Amsoil 75w90 GL-4 manual trans fluid. It didn't really change anything, but I will say that whatever fluid was in there before was quite dark. It may have even been the original fluid from the factory (80,000 miles), I am not sure. The shifter is also a little stiff feeling when its very cold.
Once car has been driven for a little while (20+ minutes), and is warmed up real good it isn't notchy or stiff. Is this just something I have to get used to?
View 13 Replies
I got a new '13 Elantra GL sedan with standard transmission a month ago, and I've noticed that 1st gear is very "torquey" (always jumps when mildly applying or releasing gas pedal), and there is a very notchy shift clunk from 1st to 2nd, so loud you can audibly hear the gearshift change quite significantly. The torquiness occurs for about 1st-4th gears (It's a 6-speed), but the notchy clunk doesn't occur for any other gears except 1st, and I took my friend's 2013 Veloster stickshift for a drive the other day, and his 1st gear is MUCH smoother and less jumpy.
Also, taking off in 1st is a very delicate balance and I still stall it now and then, no matter how much I focus and practice. It also feels like it's sputtering on takeoff every time, unless I really slip the clutch (which isn't a good habit to take up). Slipping the clutch for reverse is necessary unless I want a very jumpy, very grindy and clankery (is that a word? lol) reverse.
Is this an issue with Elantra sedans in general for stickshift models, or is it a problem with my specific car? Should I bring it into the dealer?
View 10 Replies
while taking turns at slow speeds, but only sometimes. Can't reproduce by turning wheel when not in motion. My 3yers/36,000 miles warranty expires soon. How do I prove I have a potential problem?
View 5 Replies
I want a 20th AE & have seen pics that say ESP on a button next to the hazard & others say ASR. I know that their was one option for the car: ESP. So what's ASR? Is one better than the other? Is it the same? I've heard that the ESP sucks for autocross. Is this true?
View 8 Replies
I was driving at about 60mph in 4th gear and knocked it into 2nd and the rpm's hit the max and the car shut off and I have not been able to get it started. I have compression, fuel, and spark . I've checked oil and don't have any coolant in and nor did I have any oil in my coolant. When I try to start it it try's to start but won't turn over so .
View 12 Replies
Driving home from work, I was about 5 minutes from home, got to a light only to not be able to go into 1st. I popped it into 2nd and drove home like that pretty much. Car will let me get into reverse and all other gears.
I can put the shifter towards first but it doesn't fully go in and when I gave it gas it would let me start to creep and then grind a little and pop out.
Heres a pic for your click .....
View 24 Replies
I was searching but I can't find any DYI's on turning your Daytime Running Lights off on our cars. I don't feel like buying a euro switch right now. How to do this or has done this to their vw's?
View 24 Replies
I was following the directions on the APR site to remove the ECU and it seems to not make sense. Saying the ECU is on the passenger side underneath the molding....
is the ECU in the center?
View 1 Replies
I've had the leak for a long time now possibly from when I've gotten it... anyway when I first bought it I drove it a lot, like 8k miles in 6 months. During that time I went through a qt of oil about every week and a half. Now the last 3 months I've been barely driving it due to life changes so I'm barely putting oil in I'll go weeks sometimes of checking the level and it'll be fine. This leak has to relate with how often its driven and maybe hot?
I've had the car up multiple times to try and find the spot all I know is it's behind the engine below the valve cover gasket and above or near the turbo area(I've only owned my first VW this 20th for less then a yr so I'm still learning)
View 8 Replies
I get up to go to work today and the car runs fine, a few hours later i get back in, try to put it in reverse, and nothing.. it wont let me shift in after i push it down. So i push it back in neutral and drive away.. every gear works fine, when i got home i took off the boot, tried to see if anything was loose, shake it a few times and out of nowhere first and second give. They were working perfectly 5 min before, and now they just feel really loose, but every other gear works fine, so now I have no reverse, 1st or 2nd. Did I just knock something out of alignment or is the problem a lot worse.
View 3 Replies
I recently took out my headliner And my passenger's side seat. When I put everything back together, I turned the car on and the light came on. What can be the issue?
View 10 Replies
After I got gas yesterday I drove about 10miles and the CEL light came on. The gas cap seemed a little loose so I am assuming it is that until I get it scanned soon. I was just wondering how long is stayed on if it wasn't cleared, I know some cars take a few days.
Does euroswitch installed have a problem with the audible headlights-are-still-on tone? If I leave my lights on, and exit the car no sound will sound. If I open it back up, then it will make a sound. Pretty useless.
Also, still looking on the best length for the Thule wind fairing for stock votex racks?
View 5 Replies
So I just changed the valve cover fast but I am still getting oil onto the hood of my car. It did this before I changed the gasket as well. Is my valve cover bent maybe?
View 7 Replies
Ok first lemme start I have a 20th with 76,000 miles chipped. I was driving down my street and the car julted a little, didn't think it was much, kept driving the check engine light turned on and the engine sounded like it was hesitating and I lost alot of power. Also it sounds like a Subaru. I haven't yet changed my coils so I'm thinking that's what it is.
View 3 Replies
so my check engine light came on recently and i took my car to a local shop to get it checked out and they told me one of my o2 sensors might be bad and that i should replace it. but because the catalytic converter that i have installed is an aftermarket one(installed before i bought the car used), they told me they were unable to remove the sensor attached because it was welded(?) on or something to that effect and they didnt have the tools to fix it.
so i did some research and found a better shop that deals with catalytic converters and exhaust systems and im thinking of taking my car there to see what they can do BUT, i was just researching online and ive found other posts saying that it may not even be a bad o2 sensor, it could be a different problem but the its just the bad o2 sensor code that comes up and now i dont know what to do.
just wanted to see what everyones opinion is on this subject or if they have gone through this before!
View 2 Replies
I am trying to put a exhaust cut out on my car, I am trying to put it right before the cat. Looking for pics?
View 15 Replies
I have a problem with my 20th anniversary gti. My 1st and 2nd gear won't work. Every other gear works fine, the gears never grind before or any unusually noise. I was pulling off my driveway and they just stop working. Even when the car it's on I can move my shifter to 1st and 2nd without the clutch and nothing happens.
View 3 Replies
Whenever I go over about 50 MPH it starts shaking like the dickens. We have a lot of snow around so I'm thinking i just have messed up alignment from hitting snow chunks but who knows. [URL] ....
View 6 Replies
