GTI 337/20th Anniversary :: Shift Knob Removal?


Oct 4, 2012

I was looking through the DIY and I couldn't find one that just removes the knob it self. I know its all the same steps to remove everything but everyone just swapped the boot and everything. I want to keep my boot and just change the knob to a solid glass ball.

View 1 Replies

Advertisement

GTI 337/20th Anniversary :: Removing Shift Knob?

How to remove the OEM "golf ball" shifter on a 20th AE? I tried everything but it still won't budge. Is there a trick to removing it? Is it a tight press fit or does it screw on?

I have the latest edition of the Bentley repair manual and it does not cover this shifter knob.

View 14 Replies

GTI 337/20th Anniversary :: Clutch Sticking When Released And Gears Only Engage When Push Hard Shift Knob

Been having trouble shifting into any gears on these chilly mornings in VA now... The clutch has been sticking on its way out when I release it and the gears don't want to engage unless I really push hard on the shift knob.

View 11 Replies

Passat (B7) :: DSG Shift Knob Removal

I am trying to remove the shift knob and the steps are entirely different than the DSG knobs from the GTI; You take just the boot off (not the assembly) then underneath is a hose clamp which needs to be removed. (this is not on the GTI version); I cannot figure out how to get this clamp off; I guess you need hose clamp pliers? And then do you need a new hose clamp? Won't it ruin the clamp?

View 24 Replies

Golf IV R32 :: Shift Knob Removal / Reinstall?

I recently purchased my R32 and the previous owner installed a short throw shifter. The knob and aluminum ring look like they are installed correctly but the boot won't stay up next to the aluminum ring. I originally thought that it would just either snap into place or it would need to twist to lock it into place. I've looked at and I can't figure it out. How it is supposed to attach to the aluminum ring?

View 4 Replies

Grand Prix :: BTSI / Gear Shift Knob Removal?

I've tolerated having to release my key with the manual push button for years. Now the interior is disassembled (after replacing evap core) so I'm looking into fixing the BTSI.

I've never been clear on whether the problem is in the console by the gear shift or in the steering column. The thing is in the steering and has a solenoid that will mechanically allow the key to turn to the LOCK position when energized. The manual release is at the bottom.

I connected the leads of that white thing to battery voltage and sure enough, the post retracts. So that seems to work. However, when connected to the car wiring, there is not enough voltage to retract. It retract, it will hold. I concluded the problem is near the gear shift. Probing the lead (with the white thing disconnected) indicate battery voltage, but that's without any current.

Battery voltage is getting to the wiring harness in the console. Probing the leads to the Park switch indicates 90 ohms resistance. I suspect this is too high and causing a big voltage drop so there's not enough to energize the solenoid in the column.

What can be replaced in the console to remedy this? Is it only the park switch?

How is the gear shift knob removed? I see a slit in the back of the knob, but don't know how the mechanism works.

View 3 Replies

Ford F-150 (2004-2008) :: Removal Of Transfer Case Shift Knob?

I've read a few posts of people trying and they say the cant be removed but I just don't believe it! I cut off some of the rubber on the with a knife and its all white plastic underneath.. I just don't believe that its actually impossible to remove this.

View 3 Replies

Ford Super Duty (1999-2016) :: 2004 F250 - 4x4 Shift Knob Removal?

I tried searching and googling but came to no results, unless its like similar trucks. How do the 4x4 shift remove? I have an 04 F250 and someone decided to put the shift on sideways so the 4HI and etc read upside down before I purchased the truck. Do I just rip the thing off?

View 1 Replies

GTI 337/20th Anniversary :: Removal Of The Battery In 2004 GLI

I just moved out and lack in the tool department. i have a set of screwdrivers, needlenose pliers and cresent wrench. any way i can get that bolt out to get the battery out with these or do i need the other easier tools?

View 2 Replies

GTI 337/20th Anniversary :: Side View Mirror Removal?

How do I get my driver's side view mirror off? I already have the glass and housing off. I need to get the base off of the door.

View 3 Replies

GTI 337/20th Anniversary :: Can't Shift To Reverse

I have a 20th ae Gti. When i bought the car it has installed a EIP Short Shifter and it was working fine, But... Yesterday i cant shift to reverse. So i decide to take a look since that was the first time that i have a problem with that, i thought that was something wrong with the Short Shifter so i decide to see how to install the Short Shifter so i can Re do it all by my self and now i cant Find any gear, No reverse, no 1st no 2d not even neutral.

View 2 Replies

GTI 337/20th Anniversary :: Not Able To Shift Into Reverse 1st Or 2nd?

So i went to start up my car after about an hour of not driving , (previously working fine) and I am not able to shift into reverse 1st or 2nd , ive been looking around and i guess the options are linkage, gear selectors, gear box or tranny.... Its a 337 so its a 6 speed . don't know if that makes a difference

View 2 Replies

GTI 337/20th Anniversary :: Cannot Shift Out From 2nd To 3rd Gear When Going At 25mph

Yesterday I went to shift from 2nd to 3rd real easy going like 25mph and i couldn't shift out of second. I could wiggle the shifter up and down but barely side to side. Even when moving it up and down it didn't feel like it was engaged in any gear although it was apparent I was stuck in second. Clutch feels normal and still grabs well.

So after driving only in second all the way to my uncles shop I sit at school waiting to see where i can pour more money into the GTI. Its a 20th ae totally stock tranny, I don't know a whole lot about transmissions but possibly the linkage got messed up? I didnt hit any big bumps or anything before it happened.

View 5 Replies

GTI 337/20th Anniversary :: Tranny Won't Shift Into 2nd / 4th And 6th Easily

I am having trouble shifting my 6 speed into 2nd, 4th, and 6th. I got my clutch replaced about a year ago, not sure if that makes a difference. Any fixes short of bringing it to a shop?

View 1 Replies

GTI 337/20th Anniversary :: How To Remove Shift Guide On GLI

Mine broke and needs to be replaced but i can't find any directions on how to remove it.

View 9 Replies

GTI 337/20th Anniversary :: 1 - 2 Shift Fork Failure

Looks like the 1-2 shift fork failed on my 337. This is the 2nd time this has happened to my car in under 100,000 miles of driving (I'm the original owner). The last time was about 3 years ago and the shop I was going to found a used transmission for me. Just curious, how common this happens to our 6-speeds.

View 4 Replies

GTI 337/20th Anniversary :: Shift Into Second Gear Car Won't Feel As Smooth As First

I had my shift fork and 1 and 2 gear synchros replaced. Whenever i shift into second it doesnt feel as smooth as first. when i hold the clutch longer and put it into second it feels smoother.

View 2 Replies

GTI 337/20th Anniversary :: 6th Grinds, Make A Noise When Shift In?

So there is an imowa 20th that im really interested in, 100k chip and exhaust. But there is a problem that could be a deal breaker

He says that 6th grinds when you go into it, it has no problem getting in but it makes a noise when you shift in, best guess is that its a synchro problem. This would not bother me so much if this wasn't an 8 year old limited edition sporty hatchback with a transmission unique to the standard gti.

View 4 Replies

GTI 337/20th Anniversary :: When Shift It Sounds Like Air Is Coming Out Of Intake

So, I just installed a ESE cold air intake on my gli...and when i shift it sounds like air is coming out of the intake. make sense? is this normal? Also, how high is the risk of a hydrolock?

View 15 Replies

GTI 337/20th Anniversary :: Gear Shift Won't Go Into The Slot For Reverse

So the other day was driving my car... And he said reverse quit working. I'm nowhere near my car right now, but it sounds like the same thing that it had done for me a few times. Basically, the gear shift won't go into the slot for reverse, and even first is hard to get into sometimes. Sometimes it works and sometimes it doesn't... My car's a 337 with an O2M transmission.

View 3 Replies

GTI 337/20th Anniversary :: Hard To Shift Or Just Pops Into Gear From 1st To 2nd

Sometimes (most of the time), when I shift from first to second, its either hard to do or it "pops" into gear. There's not like a grinding gear but it sounds like it is hitting something as it goes into gear. If I go 1st to 2nd while stopped, it goes in nice and smooth. It sort of feels like how you can't shift into 1st while you are moving slowly, you have to push on it a bit and then it finally pops in.

View 8 Replies





Copyrights 2005-15 www.bigresource.org, All rights reserved