GTI 337/20th Anniversary :: Shift Into Second Gear Car Won't Feel As Smooth As First
Jul 22, 2012
I had my shift fork and 1 and 2 gear synchros replaced. Whenever i shift into second it doesnt feel as smooth as first. when i hold the clutch longer and put it into second it feels smoother.
View 2 Replies
Advertisement
Yesterday I went to shift from 2nd to 3rd real easy going like 25mph and i couldn't shift out of second. I could wiggle the shifter up and down but barely side to side. Even when moving it up and down it didn't feel like it was engaged in any gear although it was apparent I was stuck in second. Clutch feels normal and still grabs well.
So after driving only in second all the way to my uncles shop I sit at school waiting to see where i can pour more money into the GTI. Its a 20th ae totally stock tranny, I don't know a whole lot about transmissions but possibly the linkage got messed up? I didnt hit any big bumps or anything before it happened.
View 5 Replies
So the other day was driving my car... And he said reverse quit working. I'm nowhere near my car right now, but it sounds like the same thing that it had done for me a few times. Basically, the gear shift won't go into the slot for reverse, and even first is hard to get into sometimes. Sometimes it works and sometimes it doesn't... My car's a 337 with an O2M transmission.
View 3 Replies
Sometimes (most of the time), when I shift from first to second, its either hard to do or it "pops" into gear. There's not like a grinding gear but it sounds like it is hitting something as it goes into gear. If I go 1st to 2nd while stopped, it goes in nice and smooth. It sort of feels like how you can't shift into 1st while you are moving slowly, you have to push on it a bit and then it finally pops in.
View 8 Replies
It all started after it being cold outside it's hard to shift into second gear when i first start up the car, and then after a couple shifts like that i get a notchy shift. after a while of driving it all disappears.
View 3 Replies
I have had my 20th for about a month now and I feel like first gear is so slow. I usually shift around 3,000 rpms. I was wondering if 1st if just slow in these cars or if there's something wrong?
View 1 Replies
My 20th Ann. GTI randomly would not go into first or second (they move into place but are just limp there and not catching into the gear) I was told for replacement of new 6-speed transmission and they did not offer any alternatives beside replacing it completely.
I know there is a thread talking about this but I read about the shift fork, or a piece of the shift fork that breaks and this problem fits my exact description. Not much info on what I can do, or at least not specified. What is any cost effective way to get my gears back without completely replacing the transmission? Is there anything I can do to just replace a broken part or are there any alternatives?
View 14 Replies
Just did my clutch yesterday and now I'm having some linkage issues. 1-4 shifts smooth, but 5th is a little tight and I can't get into 6th. I feel like the shift linkages may be a little messed up.
View 14 Replies
I just recently replaced my radiator and cold air intake. right after I did and I drove it, my car was idling high at 1.5 and the brakes feel like they are going out. I am kind of confused as to how this is even related.
View 2 Replies
When I Accelerate It almost feels like I am fluttering the gas pedal. Its weird on my car now I have revo stage 2, a TIP, 42DD TBE, 4bar FPR.. Do I need to buy a race n75 vavle ?
View 11 Replies
Background facts:
Tranny swapped from my 4 speed auto to a 1.8t o2j 5spd
13lb. Light flywheel
Powerflex dogbone mounts
Peloquin LSD
The problem: Very hard to get a smooth shift from gear to gear. Trust me, I know how to drive, but I can always feel the car shifting into a different gear if you know what I'm saying. On my friend's bone stock Jetta, I just let the clutch out without gas in between shifts and you don't feel a thing.
On my car, you feel EVERYTHING. People have told me the light flywheel will make the ride more uncomfortable in many ways, especially since the RPMs drop much quicker in between shifts than stock.
View 9 Replies
I don't know whats wrong, last night i was driving and all of a sudden the car started to feel like it had a flat tire. The music was loud so i was sure...i pulled over and sudden my cel starts flashing. I turned the car off looked under the hood and couldn't see much (it was dark) i turned it back on and the same thing, when i accelerate there is a loud noise that seems to come from under my seat as well as a sort of stutter/putting like right before your stall out in a manual car.
View 1 Replies
I was going down the freeway at about 80mph when I had to hit the brakes pretty quick, the rear end felt like it got a little squirrly for a minute. What could I get to make this a little more stable? Rear sway bar?
View 17 Replies
I've just got my 2015 GTI a few months. I'm driving manual with my GTI daily commute to work, getting along well. However sometimes I'll be struggling with the manual when approving a corner or a stop, and I'm not having a smooth up shift with 3rd and 4th gear (odd eh? most of the people will have difficulties starting up but since I've been taught so I'm fine...)
To be more specific:
1. Just want to know what REV usually will be done? e.g. 3rd gear with decent speed, would you maintain it until it revs up to 3k? or would you up shift when passing 2k+? Usually I'm doing the latter so I guess this is why I'm having a sluggish/jerky up shift with 3rd and 4th gear. And would you still put on a little bit gas when engaging with 3rd and 4th gear?
2. What to do when approaching stop? Assuming you don't have enough distance to down shift each gear. EITHER: Break with the current gear and clutch in until it reach 1k rev and complete stop; OR: down shift at least once to a lower gear and break until complete stop?
View 24 Replies
I noticed a month ago that my transmission didn't feel as smooth whenever I shifted. It would come and go, it'd feel smooth and then out of nowhere it wouldn't be smooth again. It feels similar to when you sit inside a car when it's off and you move the shifter from gear to gear (a nonsmooth feeling). So this Monday I decided to empty out a bit of transmission fluid and add some transmission additive. I drove around and it did feel much smoother. However, it does not feel as smooth as it has always felt. The car runs perfect, it just comes down to my personal preference in smoothness.
Mk4 GTI 1.8t 2003
View 4 Replies
I have a 20th ae Gti. When i bought the car it has installed a EIP Short Shifter and it was working fine, But... Yesterday i cant shift to reverse. So i decide to take a look since that was the first time that i have a problem with that, i thought that was something wrong with the Short Shifter so i decide to see how to install the Short Shifter so i can Re do it all by my self and now i cant Find any gear, No reverse, no 1st no 2d not even neutral.
View 2 Replies
So i went to start up my car after about an hour of not driving , (previously working fine) and I am not able to shift into reverse 1st or 2nd , ive been looking around and i guess the options are linkage, gear selectors, gear box or tranny.... Its a 337 so its a 6 speed . don't know if that makes a difference
View 2 Replies
How to remove the OEM "golf ball" shifter on a 20th AE? I tried everything but it still won't budge. Is there a trick to removing it? Is it a tight press fit or does it screw on?
I have the latest edition of the Bentley repair manual and it does not cover this shifter knob.
View 14 Replies
I was looking through the DIY and I couldn't find one that just removes the knob it self. I know its all the same steps to remove everything but everyone just swapped the boot and everything. I want to keep my boot and just change the knob to a solid glass ball.
View 1 Replies
I am having trouble shifting my 6 speed into 2nd, 4th, and 6th. I got my clutch replaced about a year ago, not sure if that makes a difference. Any fixes short of bringing it to a shop?
View 1 Replies
Mine broke and needs to be replaced but i can't find any directions on how to remove it.
View 9 Replies