GTI 337/20th Anniversary :: Shaky Steering Wheel When Approach Above 60
Dec 29, 2008
Just threw some steelies on my car for winter mode. I was told they were in balance but I'm having a weird issue.
Steering wheel shakes when you approach 60+, but with varying severity. It will shake hard one minute, and then soft the next.
I also found that stepping on the gas makes it shake, and letting off the gas (coasting down) makes it stop.
Is this an issue with the wheels, or something in my drivetrain. I never really noticed it with the RC's.
View 13 Replies
Advertisement
Under acceleration between 65-80 on the highway I get a serious vibration in my steering wheel. I can feel it in the floor of the car too. When I let off the throttle it goes away. I have new tires, wheels, and new axles too. I thought it was the inner cv's but i was wrong. I was thinking possibly motor mounts, but I am not 100% sure. Specs 2004 Jetta GLI, ecs 10mm spacers in the front, coilovers dropped 2 inches, otherwise everything else is stock in the bushing mount department.
View 11 Replies
I am currently running 8mm ECS spacers in the front and 17.5mm ECS spacers in the rear. My Summer set up is still stock BBS RC's, but my winter wheels are Lenso's.
Last winter was my first winter running with the Lenso's and had no issues. This past weekend I swapped out the BBS's for the Lenso's, and now I am feeling vibration above 60MPH. I felt no vibration with the BBS's. I just took them in to get balanced (maybe a weight fell off-idk), and they were within 1/4 of 100% balanced. They then thought it may be the spacers I'm running so they cleaned them up, but said that it didn't work.
My alignment is also spot on-so that's not an issue either. I am at a loss as to what would make me feel that vibration after just changing out the wheels.
View 7 Replies
My 1.8t gli is giving me this issue, when braking (specially hard) my steering wheel shakes side to side, my rotors got changed less than 20,000 miles ago (all of them) and they seem fine right now.
Could this be my Tie Rod ends? The car has 110,000 miles on it, and i know some bushings if not all need to be changed, which I am gonna be installing when i put on the Raxles i just got.
View 8 Replies
My steering wheel controls stopped working over night (horn also). When i went out this morning i was not able to get into the car using my key fob.
I hooked up my vag-com and got 2 codes.
00955 - Key 1
09-10 - Adaptation Limit Surpassed - Intermittent
00956 - Key 2
09-00 - Adaptation Limit Surpassed
My key is working again, but my horn and volume controls...ext do not work.
View 2 Replies
I have a 05 gli w/ 65k miles. I got new plugs gaped correctly and new coils. When I'm idling at 7-800rpm my steering wheel shakes a little and when I flip on the ac it's even more noticeable. So much the rear view mirror shakes just a tad. What do yall think it could be cause it's not that bad but I'm anal about my cars and I want it to be perfect.
View 11 Replies
The center of my steering wheel rattles (part that you press for your horn) is there any way to tighten this?
View 4 Replies
I just got the brakes done and a weird thing is happening: I upgraded with adams rotors, ebc red pads, ecs ss lines, tyrolsport bushing stifenning kit.
Whenever I try to brake from 40+mph to 0 the steering wheel vibrates a lot. What can be the cause of it?
View 24 Replies
Trying to get my car all fixed up for winter, but my steering wheel has a vibration.
When on the highway, it gets worse/faster with accel. and when i let off the gas and coast, it almost goes away... does not change (better or worse) with braking.
Specs - Dropped on koni coils, 2 diff sets of rims (one brand new, one came with car same problem with both sets), spacers all around, everything else stock...
View 16 Replies
I searched and found a diy on how to change and flush the power steering fluid. I changed it on monday and a week later the same supercharger noise occurs when moving the steering wheel, My queastion would be what can the problem be and how i go about in finding the problem on my 20th ae 1.8t.
View 5 Replies
Well I've been noticing that when I'm slowing down from higher speeds (50 mph or so) my steering wheel is shimmying a bit. Also I just started to hear my front passenger brake squeal a little. Well when I went to visually check the brakes, the pads seem VERY thick! Is it normal for them to start to go bad even with such thick pads? They are like 1cm thick. Also the rotors did seem used for sure, maybe 1mm worn down or so from the outer lip which is raised (I hope you understand what I mean), but they weren't scoured or anything. I suppose they could still be warped? I figured with such big brakes I wouldn't run into that problem. The car has 70k on it and the pads have been replaced once and rotors turned at 25k by the previous owner.
View 6 Replies
I got an 04 GLI ... When I'm driving at about 60 mph, and I apply the brakes lightly, i get a vibration in the steering wheel. it doesn't happen under heavy breaking, just when i press the pedal down lightly to slow down, and there is NO pulsation in the pedal at all during any time.
Some history of the car:
Just did pads and rotors 2 weeks ago,
car has spacers, hub centring.. the problem occurs with out the spacers also.
had an alignment a month ago.
had tires balanced 2 months ago
tires are 2 months old.
View 9 Replies
Had the shaky steering wheel @ 50-65 MPH. I remember this happened to my other car after the brakes were inspected. The tech put the rim on without cross tightening the lug nuts.
Anyway I took off the wheel and noticed the brake rotor was not lined up with lug bolts. In other words the bolts were not centered on the holes of the brake rotor. So I broke the rotor free and lined up the holes. Put the wheel back on and now no shakes at 50MPH. I do get just a little of shake on braking at high speed but thats all.
I think the rotor can get stuck on the edge of the bore and not able to seat firmly on the spindle.
View 14 Replies
This summer I replaced the inner and outer tie rod ends on a 97 Nissan Altima, had a bent wheel replaced, and had an alignment done. Everything worked smoothly for the last 5,000 or so miles. I had my tires rotated and balanced recently which created a new problem, a shaky steering wheel most noticeable at slow speeds. I've had a similar problem before and had it fixed by balancing the tires. I took it back in to have them rebalanced, thinking they may have forgotten to do it the first time. They rebalanced them and the problem has not changed at all.
View 3 Replies
Got an issues with my 02 Santa Fe. Shaky steering wheel at all speeds during straight driving more than in turns. 130k miles on the vehicle.
The tires are worn, and need replacing. No missing wheel weights that I saw. No issues with braking.
At slow speeds it feels like the front end is swaying back and forth. I am planning to have the tires replaced, but I feel that this is more than just the tires.
I suspect ball joints / tie rods are the culprit. Is there a good way to check these components from home verses going to a shop and having them diagnose the issue.
With ball joints / tie rods, I am confident that I can change them on my own.
View 2 Replies
I have my 2005 F-250 6.0L Powerstroke. Thing is, I have this issue where when I turn the wheel at a dead stop or at low speeds. I get this weird feedback in my steering wheel of a shaky vibration, like it's skipping. And frankly, feels like the whole cab is shaking. I've replaced the power steering pump, and tightened the steering box. What could it be?
View 4 Replies
is it just a 337 thing? but, the rear wheel on the left is poked out farther than the wheel on the right. I didn't measure it just yet but it looks as it's almost a 5mm difference. I didn't realize it until today when an old friend was inspecting my car.
View 11 Replies
I have a stock 04 GLI, I want to get rid of wheel-fender gap. Whats the most easy and basic way to do this? Can I do just springs? If so which ones?
View 14 Replies
I have an 04 GLI with around 130,000 miles. I have developed a squeaking noise coming from the front end of the car. I cant really tell if its the right or left side. I can tell you i only hear it when driving under 30 mph and it seems to happen more often when i slightly turn the wheel to the right. Also when i accelerate from a stop or let off the clutch pedal into 2nd or 3rd. I wonder if it could be the wheel bearings going bad? I replaced both front and rear control arm bushings back in December just for some background. FYI, by squeaking i mean the sound of metal to metal. Its not a squeal or hiss, or anything to do with a boost leak. When you hear it, it sounds like a squeak, squeak, squeak kinda pattern but comes and goes depending on speed and the turning of the steering wheel.
View 2 Replies
What is the mk4 standard locking lug bolt? IIRC it was like a 16 point.
View 1 Replies
I've been hearing a "clunk" like noise here & there when I turn the wheel on my GLI all the way to one side then turning it back. I've heard it when making u-turns and when reversing. It seems to be coming from somewhere on the bottom of the drivers side and it doesn't happen all the time. I've brought it to the shop twice but they can't seem to figure out what the problem is & the car won't make the noise whenever they seem to test drive it. What this might be?
View 13 Replies
