When I turn left sharply i hear a rubbing sound. I thought it was just tire rubbing but I am not sure. What else could it be? The car is stock height stock everything. It just got new brakes and tires recently. it looks like something is rubbing the cv boot....
View 5 RepliesWhen i make a left turn i can hear a rubbing sound thats like a low groan. Searched it but couldn't really find one that was described this way. It's a 20th GTI.
View 22 RepliesMy 04 gli makes a rubbing noise when accelerating thru hard left turns.. but weird enough i can take the same turn at the same speed in neutral and have no noise at all. I changed both front wheel bearings and cant seem to find the answer. I brought it to vw and they checked the whole suspension struts springs cv's tie rods ect. and they all checked out good they said. the car used to have a exhaust and i just recently put it back to stock, could the exhaust make the noise perhaps?
View 1 RepliesWhen I turn my wheel, i hear this sound like im rubbing my lip but not as loud.... Is this something I should be worried about... or am I just rubbing my fender lining?
View 4 Repliesmy gli is acting up in corners, when turning into a right-hand corner the car is fine even under hard acceleration, but when turning into a left-hander under acceleration the abs acts up like its lost traction on ice, any thaughts.
View 1 RepliesI have a 2009 Camry that makes a metal to metal rubbing noise when turning left. t is coming from the Front Right passenger side. I recently changed out the bearing and hub on the front right but I still have the noise when turning left. Also, when driving normally and going straight there seems to be somewhat of a dull click click click noise.
View 3 RepliesI just rolled 100k in the 337. Time to do some refreshing. 2 noticeable issues (non-motor related anyway )
1 - sometimes when turning hard left to right, or vice versa, I hear and feel a "cluck", almost like the something is shifting.
2 - I've got a creak from the front (and I think maybe the back too) when I get out of the car. Sometimes I hear it when I slowly go over a bump as well.
3- I think my rear shocks are on the way out.
In the last 15k I replaced both the inner and outer tie rods. That's all I've done to the suspension.
Just replaced inner and outer boots. All seemed to go well. Just got done with some errand and noticed a light knock on the driver side when turning left. What might cause this?
View 2 RepliesI have the most terrible clunking/rubbing sound on my right passenger side, especially when I'm turning left. When I drive straight it sounds like the wheel is hopping even when going over minuscule imperfections in the road. I also get a terrible rub when going over speed bumps or into grooves and dips in the road.
I've searched and searched but cannot come up with a answer towards rectifying the issue. My car hasn't been lowered; I'm running the stop 337 suspension. I've replaced the following within the past two years:
-control arm bushings
-ball joints
-tie rod ends
-upper strut bushings and bearings
-passenger side axle
-dog bone mount
-engine mount
-tranny mount
Most recently:
-front struts
-sway bar end-links
-driver's side axle
It seems to like everything should be solid considering I've done all of this crap. I don't understand why I'm having this issue and why it sounds like it is getting worse and worse.
Have a 05 GLI tiptronic. Every time while making a left turn there is a LOUD vibrating/rattling sound coming from underneath my shifter. Dealership told me it was my exhaust rattling since it was larger than OEM. That doesn't sound right at all.....
View 1 RepliesIf I am going under 15mph or so and turn the wheel left or right i hear a small "clunk" sound. It happens when i get the wheel to about 2 and 3 when i turn right and about 10 and 9 when i turn left... What could this be? Also i do not hear it when I am going over 20mph or so ...
View 24 RepliesI originally own an mk4 r32 but my friend owns a 20th.. He recently lowered his car about an inch or 1.5 of an inch he might have a finger gap.. He is on jam coilovers all the way down in the rear and about 20 threads left up front.. There is a nasty sound coming from the front driver side when he is turning or going straight.. he still didn't do an alignment idk if that matters.. and he also miscounted the threads so his driver side is about two threads higher but he fixed that now.. he also doesn't have camber plates up front does this matter?
View 3 Replies2004 PSD 4x4 72k. I thought I would be proactive so I bought the front ball joints and have plans to install them but recently I starting hearing (and feeling) a clicking sound in the front LEFT when I make sharp turns to the left and hit small bumps now and again. I jacked up the front end and am able to get 1/4" of movement front to back (top to bottom so not steering) in the wheel.
I narrowed it down to the hub. I took it apart and it is most likely a sealed unit so no adjustment is possible....that I can see.I pulled out the locking hub and got as far as I can to know there is not an adjustment. Need to confirm that it indeed is a sealed bearing and if so what are the part number(s) I may need to repair it.
Couple of days ago I notice some rubbing on my front passenger side and I'm pretty sure it's my sway that rubs on the axle. I could understand that if I was slammed but I'm not even all the way down on my vmaxxs. I have about 15 threads left and it still rubs especially while making left turns. When I first got my coilovers I used to drive all the way down with no issues but now it's getting worse and worse and I don't know what to do besides going up couple of threads. The tricky part is that my driver's side front doesn't rub at all. Any ides why would start rubbing all of the sudden when it never rubbed before even when I was lower? Is there anything I could do, maybe adjust the end links or something? I know I can cut the sway out but but I'm pretty sure there is another way to fix it since it started rubbing recently.
View 13 RepliesJust recently bought a 04 gli. When I shift in to 3rd and let off the gas there is a weird grinding rubbing like noise. It only makes the noise when it's in 3rd gear...
View 3 RepliesI have a 20th with 106k on it and I notice mostly my right front rubbing on hard turns. Suspension is totally stock other than a 28mm rear sway. Is it possible that's causing it or is my suspension just getting old? No spacer on the fronts.
View 9 Replies2011 Hyundai Elantra, 42k miles. The car is my girlfriends which I drive once every few weeks. Yesterday I noticed a rumbling noise coming from the right front tire area. The noise only comes about when turning a fairly sharp left while above 20 mph. Taking a left onto a side street etc doesn't cause any noise, but taking one while going through a big intersection etc. Where the speed is up a little bit causes the noise. The tires are original, obviously not new, but they still have a decent amount of tread left on them, they're Continental Pro Contacts.
Tire, ball-joint, brake pad rubbings? I'm going to take it to get looked at tomorrow, I did spray the area with a hose in case there was something caught in there, but that didn't change anything. The tire looks fine, no abnormal wear or bulges, the car is in alignment and makes no other noise except in the circumstance noted.
We have an '07 wagon that recently started exhibiting the following: When doing a sharp turn left or right you can hear a rotational shhhhusshhhing sound... shussshhh *pause* shusshhh *pause*.. etc. Its obviously linked to the front wheels since going straight does not produce the sound. Brakes and rotors have 13k on them; dealer has checked out the car and says everything looks good and the bearings are fine.
Could this be CV joints or something similar? Where to look? This is not a thud thud thud (which I have heard before when another car of ours needed new cv joints). Safety is main concern, don't want bearings freezing while driving..
My front left tire is rubbing to the point where I can feel it in the steering wheel slightly slowing the car down. This happens only going over about 40-50 and only when i turn the steering wheel like an inch to the left. To better clarify it doesn't rub while turning left going down a slope.
View 2 Repliesso I was heading off the freeway to take my exit at night. Didn't see there was a little curb island between the main freeway and exit. Went with the car over the curb and my right passenger tire went out.
I changed the tire and driven off, then noticed the car sound got much louder all of a sudden and when I turn the steering wheel right or left, I hear or feel a heavy sharp sensation- yet the car turns fine, it just sounds louder when I press the gas and when I turn the steering wheel I can feel my feet vibrating a bit and a soft/sharp squeak sound comes out.
What could this be?
I've had my R since late mid-summer, and one of the first things I noticed was this clunk sound when reversing into my parking spot and when making an aggressive sharp turn. Usually Left.
After reading multiple threads on this topic, I came to the conclusion that it was my sub-frame and the bolts need replacing. I got in a GB for the tyrol subframe stiffening kit after reading some good reviews/responses.
Today, on my day off, I finally went to a mechanic to get this installed. I just changed my mechanic, and this was my first visit to the guy hes had over 10 years experience at vw and just opened up his own shop. He did a great job, torqued the bolts to spec, made me drive around, do some pulls in 2nd and 3rd gear, reverse forward etc.
So hes about to pull the car back in to retorque and.... CLUNK...
Get in the car, reproduce the sound, get the car back up on the hoist... and at this point I'm expecting the worse. He takes my control arms off, checks the end links...
Brings the car down, and the clunking sound is louder than ever. It was the weathergaurd. When I turned on the wheel it was pulling it out and when I straightened the wheel it was popping it back into place, making a big clunk sound.
This was the exact sound that I was hearing, thinking it was my subframe. The bolts that came out were not stretched or bent out of shape like the ones you see in other reviews. They're actually in great shape. I'm glad I did the Tyrol kit and do not regret it, and I definitely feel a difference when I went into some aggressive turns.