My reverse light switch bit the dust and I'm trying to find the OEM part number. Would it be the same part as the MK4 R32 for our O2M 6spd trans? (Part #: 02T945415P)
Here is the R32 part I found: [URL]
Is the 25th AE part number, 1J1-941-017N, for the passaenger side the same for the 20th AE. My gut tells me yes, but i can't find it on a search.
View 6 Repliesit all started out like this. i was unable to go into reverse took it to a shop when first and second were good. Came out of the shop after inspection and now i can shift into first or second gear but not the rest, its stuck in those two and they do not work. do i need a new trans or is it a shift fork and or linkage?
View 11 RepliesFor some reason my headlights and fog lights dont work as well as the turn signals, however the marker lights and 4ways do. The ac and fan also dont work. This all happened at once yesterday. I checked the fuses and they are fine. They must not be getting any power.
View 7 Replies(6 speed)... I have faulty reverse lights, my speed sensor is working so I am sure it isn't the fuse, I am guessing this means the switch/sensor is broken. Where it is located, and what the correct part number is?
View 3 RepliesI have been having an issue with my interior lights, namely all the dash lights (cluster, climate, stereo, etc)
I have to keep switching the euro switch back and forth until it finally switches on the interior lights. The headlights still work but not the fogs, unless the interior lights go on.
What this could be? Perhaps an electric problem? Faulty euro switch?
I get up to go to work today and the car runs fine, a few hours later i get back in, try to put it in reverse, and nothing.. it wont let me shift in after i push it down. So i push it back in neutral and drive away.. every gear works fine, when i got home i took off the boot, tried to see if anything was loose, shake it a few times and out of nowhere first and second give. They were working perfectly 5 min before, and now they just feel really loose, but every other gear works fine, so now I have no reverse, 1st or 2nd. Did I just knock something out of alignment or is the problem a lot worse.
View 3 RepliesSo I get in the car to move my car this morning and I can't get the car into 1st gear. It turns out I can't get the car into reverse, 1st gear, or even 3rd gear. It feels like something is blocking me from even approaching those gears, however the others (2,4,5,&6) seem to be fine.
View 14 RepliesI have a 20th ae Gti. When i bought the car it has installed a EIP Short Shifter and it was working fine, But... Yesterday i cant shift to reverse. So i decide to take a look since that was the first time that i have a problem with that, i thought that was something wrong with the Short Shifter so i decide to see how to install the Short Shifter so i can Re do it all by my self and now i cant Find any gear, No reverse, no 1st no 2d not even neutral.
View 2 RepliesSo i went to start up my car after about an hour of not driving , (previously working fine) and I am not able to shift into reverse 1st or 2nd , ive been looking around and i guess the options are linkage, gear selectors, gear box or tranny.... Its a 337 so its a 6 speed . don't know if that makes a difference
View 2 RepliesI have a problem with my 20th anniversary gti. My 1st and 2nd gear won't work. Every other gear works fine, the gears never grind before or any unusually noise. I was pulling off my driveway and they just stop working. Even when the car it's on I can move my shifter to 1st and 2nd without the clutch and nothing happens.
View 3 RepliesI just bought a forge 007 and an apr chip. When i installed the DV i ran it in reverse and am getting a fluttering noise.... i'm running the yellow spring which should be right for a chipped car.
View 6 RepliesSo whenever I put my car in reverse and back up my car makes incredibly loud and messed up noises. What's going on and if this is a major or minor issue? At first it wasn't as loud now it's head turning people at the mall literally stop and stare at me its embarrassing...
View 7 RepliesAir condition will not work in my car. The A/c button will light up but will not do anything. The fan speed will only work on high and not on the other settings. I mean when I set it on 1-3 it will not kick on the fan. When I switch it to 4 it will kick the fan on but no A/C still even at that setting.
View 1 RepliesMy headlight bulb is out on the left side. Tt's just a regular bulb, not HID's or anything. I got a new bulb and it still doesn't work. I checked the wiring and it seems intact. The other lights which are connected in the housing work fine.
View 1 RepliesCar ran perfectly normal. come back out start the car, the EPC light comes on, and my gas pedal doesn't work. Doesn't do a THING...first 3 times i killed it and re-started it, the rpms shot up to 4500 for a second then fell to around 1100 and stayed there. now i start it and it just hangs at 1100. car has 47k miles on it, a 3in DP 2.5in magnaflow catback, short ram intake, TIP, 710N DV, stock N75. Only thing I can think of is TPS but I don't have access to a vag com.
View 2 RepliesThe shift lever goes into the gates fine, if a bit easier. No weird noises. 1st and 2nd gear don't work - they act like neutral.
3rd-6th and reverse work fine. Clutch hadn't been slipping. It's the original clutch.
Local mechanic found no issues between the shift lever and the transmission itself. 3 weeks ago replaced timing belt and water pump and the car has been running well.
Yesterday I was driving home from work in light stop-and-go traffic. At one point I put the car in first and it acted like it was in neutral. Engine revved but there was no engagement of the drivetrain. 2nd gear was the same story. After experimenting, 3rd-6th and reverse worked and I was able to get the car limping off to a parking lot by starting in 3rd.
I got it towed to a local mechanic who services my car who said he doesn't crack open transmissions but would look to see if there was something obvious wrong between the transmission and the shift lever. He didn't find anything.
So I got this car for 750 and I did choose to take on the problems of the car for the miles on it and how much life I've seen these jettas go for I thought it was a pretty good deal runs and drive great except front left wheel bearing. Onto the lighting so found that the low beams only work when the car is in the on position and when the car is started and running the low beams do not work the bulbs are good because I replaced them and they work when the ignition is in the on position and I have check the fuses all seemed to be fine I also noticed that the only lighting I get on my cluster is the two display screens down on the bottom not even rpm/mph cluster? Could any of this be symptoms of faulty headlight switch? Or too much resistance somewhere?? I also notice my high beam switch also doesn't stay on I would have to hold the switch if I wanted to keep it on....
View 2 RepliesMy radio does not work kinda... when i turn the car on it works for a minute just fine, then the volume goes off and i cant put it up or down, but i can use and other function cd/casset fm, change stations and all that i just cant use the volume, or hear anything if i turn the radio off and then back on it works for like 5 sec then same thing happens.... I know sounds like fuses, but why does it work then shuts off?
View 3 RepliesSo my Gti 337 it starts but it turns right back off starts and turns right back off people are telling me it's the fuel pump checked it it's not that people are saying its my ECM.
View 5 RepliesI parked the car yesterday and everything was working fine. I go out this morning to go to work and i cannot get the car to go into reverse. I put it in neutral and attempted to push it out of my parking spot, but when I took my foot off the clutch, it stalled like it was still in gear even though the stick was in the neutral position. While still in the neutral position, i can still move forward as if it were in first. When i put it in reverse and attempt to move, i get no movement. I can get it to move forward, but it refuses to go into reverse. I have no diagnostic lights illuminated and the car has no issues running or starting.
View 14 Replies