GTI 337/20th Anniversary :: Replacing Serpentine Belt?
Feb 3, 2012
I looked through the MKIV DIY stuff but didn't see one. My serp belt is in need of replacing soon. Seeing some cracking on it for sure. According to records from the PO it was bought as part of the timing belt kit at the end of '09 so I imagine it was changed then...just didn't think it would be so cracked so fast!
Anyway, looking to replace it in the coming weeks. If I could be pointed in the right direction that would be awesome. I do have a Bentley, but I find how-to's on here to often be better. But if I need to just follow the Bentley, I can do that too.
View 24 Replies
Advertisement
I have a mk4 gli and I'm having a problem with serpentine belt squealing when I'm at idle and when I turn the ac on. It's isn't all that loud at idle but when I turn on my ac it gets real loud. My ac stopped working a little but after this noise started to happen. Could it be possible that it's the bearing in the compressor that is making it squeal or could it be somthing else?
View 2 Replies
I replace my timing belt and water pump and my engine is now over heating. I notice it's only over heats when the ac is running and the engine is idling. When I start to drive the engine temp goes down.
View 1 Replies
its cracked and its leaking i was tld its 210 dollars to replace it... what is the part number for this??? or is this not that bad of a deal?
View 2 Replies
Two weeks ago had to replace my ECU due to failing. Got a new one, reflashed my Uni software and the only code left after the ECU was replaced was the Air Intake Temp Sensor. That was 12 days ago. Today, get home. Car was running smooth all day. No issues. Go out and start the car and my idle is at 1300. (Normally 750) I have zero throttle response. I've unhooked the battery twice to do a reset, unplugged the throttle body sensor and plugged back in, still got nothing.
View 9 Replies
I'm new to VW but I just replaced a manifold hose and now my car keeps shutting off but if I let it sit for like 5 min. It starts right up. The hose that came on it was plastic n I switched it to a rubber one from advanced.
View 12 Replies
Most of the info I could find recommended replacing the entire glove box, and removing the center console to do so. I found a replacement door on ECS tuning's website, but I can't find a DIY on replacing the door/lid only. Any way out on replacing the door only, are the same steps required/removing the center console and taking the entire box out, or can the ECS tuning lid be fitted without as much disassembly?
View 12 Replies
is the timing belt the same for the 2004.5 and the 2005 gli?
View 1 Replies
I'm new to the board always been into old school air cooled vws but just bought a 20th anniversary GLI Jetta and need to know how to deactivate the seat belt ding ding. The car did not come with an owners manual so can't look it up.
View 8 Replies
So my son's car started to sound like a diesel at idle - a good precursor to timing belt tensioner failure and belt slip, as that happened last night.
When we pulled the belt cover off and turned the dampener pulley by hand the belt was spinning on the bottom gear. When turning the engine over, there was no mechanical noises to indicate valves making contact. Did we get lucky or are the valves just bent out of the way?
How can you tell the valves are bent without taking the head off?
View 4 Replies
My 2006 VW GLI keeps having an intermittent seat belt warning chime even though my seat belt is fastened (and there is no one on the passenger side). It's nearly impossible to reproduce this problem as it will do it at different times of the day and sometimes not for a week. It generally chimes anywhere from 5-10 min despite the seat belt being fastened. I've tried re-buckling and I've tried shaking the buckle and neither worked.
View 2 Replies
Ok, so there's a whining sound that is going along with my RPMs, that is coming from the area of my belt, obviously i think its the belt. I am also leaking a little anti freeze. What this could be.
View 5 Replies
Serpentine belt on a 2006 Honda Odyssey fraying and then ripping into the timing belt causing that belt to break? I recently had this scenario given to me as the cause of my recently replaced timing belt breaking.
View 11 Replies
2006 6.0l ... I've read all over for tips on routing this belt and everyone plays it off as being some simple '20-minute' task. I'm on my 4th hour on this now.
I can't figure out how to route the belt around the tensioner pulley, circled in the picture (from another thread). Everyone glosses over how to do this and I can't figure it out.
It seems like the only way to get it on is to bend the belt and slide it between the pulley and the block, but that I just can't reach the blasted thing.
View 4 Replies
Airbag light came on the other day while out on an errand. Take it to work and pull the codes. I got a low voltage code and a driver seat belt buckle code "00059" maybe I'm trying to recall but unsure. I have a pair of seat belt buckles out of a mk5 Jetta. Do these will plug into my mk4 by chance?
View 2 Replies
I have a 1991 toyota celica st and I recently broke some belts. I think I broke 2 belts. Any diagram of the belts and pulleys because I don't know where to loosen the pulleys to replace the belts. What each belt powers?
View 3 Replies
I am very concerned regarding how often my serpentine belt needs to be replaced. First time it was replaced at 104k, second time dealer replaced it at 126k, third time at 153k. Today I went for oil change (173k) and the dealer told me that it has little cracks and recommend replacing it. Is it normal? Could it be something else is affecting it?
View 11 Replies
I have had my Tiguan S for almost 2 years and it seems that I keep having to get it towed. I just had it to today because the serpentine belt came off when I was driving. After I bought it the fuel line was loose and it had to get put back on and after about 12000 miles my tranny went out and had to get replaced.
View 2 Replies
I have troubles with what I thought would be a basic job: removing the belt on my 2004 Solara so that I can remove the alternator. I can't get the belt loose enough to slide it off, no matter how hard I try.
The wrench I'm using is about 12" long, I'm a big guy and I've done powerlifting in the past, meaning I can apply lots of strength on that wrench. I've just watched a youtube video of a guy with the same engine removing his belt, and he exerted a lot less effort for a lot more wrench travel. I thought that using a breaker bar is extreme.
View 9 Replies
Pulled off front bumper today with no success, seems like the whole radiator and a/c unit must be removed?
View 5 Replies
So the PO of my Jetta had the alternator replaced...awesome! One less job for me to do. My serpentine belt went out yesterday so I chalked it up to being old. When I got the new belt on it kept slipping off, I pulled the tensioner pulley off and saw that the wheel was all chewed up, I look down and saw that whoever put in the alternator didn't bother to screw in the bolt all the way and it chewed up the belt and everything else.
View 1 Replies