GTI 337/20th Anniversary :: Removing Front Valance?
Aug 6, 2008
I got a question..how do u remove the front gli valance?
View 4 RepliesI got a question..how do u remove the front gli valance?
View 4 RepliesHow do you remove the center cap on the wheels on the 337? I do not want to damage them.
View 16 RepliesHow to remove the OEM "golf ball" shifter on a 20th AE? I tried everything but it still won't budge. Is there a trick to removing it? Is it a tight press fit or does it screw on?
I have the latest edition of the Bentley repair manual and it does not cover this shifter knob.
well what are the chances that all in one week.. I would get my front end hit in the same spot that i just fixed.
get a crack in my windshield.
get a flat tire.
Have the tab that holds the passenger sun visor in place break off.
Have a new "clunking" noise in the front end.
Went to lower my front end today and after trying for 15 min the nut directly under the spring was frozen. i sprayed it with PB blaster let it sit for like 20 min, kept on spraying it during that time. tried adter that and still did not budge a mm. even tried with a flat head and a hammer trying loosen it. did not work. was wondering if there was any other way i can get it loose?
View 8 RepliesI just had new R32 rear lower control arm bushing installed but I still notice that the car rocks and bucks somewhat when I shift. I can control it I shift and accelerate slowly and deliberately but where's the fun in that?
I didn't replace the front lower control arm bushings but I'm starting to think I should have. Or maybe something else needs replacing??
Experiencing this bucking when shift? Maybe I just suck at shifting?
Both the front headlights do not turn on. I checked the fuses on the side panel and they all seem fine. I removed my battery to start another car. Do not know if that is the cause for killing the front head lights. Day time running lights are not on either. Lower fog lights work.
View 8 RepliesCouple of days ago I notice some rubbing on my front passenger side and I'm pretty sure it's my sway that rubs on the axle. I could understand that if I was slammed but I'm not even all the way down on my vmaxxs. I have about 15 threads left and it still rubs especially while making left turns. When I first got my coilovers I used to drive all the way down with no issues but now it's getting worse and worse and I don't know what to do besides going up couple of threads. The tricky part is that my driver's side front doesn't rub at all. Any ides why would start rubbing all of the sudden when it never rubbed before even when I was lower? Is there anything I could do, maybe adjust the end links or something? I know I can cut the sway out but but I'm pretty sure there is another way to fix it since it started rubbing recently.
View 13 RepliesOk, Im trying to get my front licence plate holder off. I've looked in all the DIY forums and cant find what im looking for. My question is how do i get this thing off?? I've took the two screws that hold the thing to the bumper off, and its still soild as before i took the screws out. Is it held on by the rub strip?
View 24 RepliesI am wondering what size spacers i should run in the front and back?
I am going to be on the stock aristos for a bit but would like some poke, fill the fender or maybe even come out a little bit further.
I just picked up a BMP 20th ann last weekend after looking for a nice clean one for a while. I love the way the car looks compared to my stock 1.8t gti, and I am also loving the Recaro seats. The 20th is all stock, and i have a few minor things in mind for it just to get the car to look how i want. I also had a few questions... do tires rub against the front when turning sharply? The car has stock suspension... also the front lip has a small crack and i was wondering if it was worth it to get it fixed or to buy a new one? And there is an annoying squeaking sound coming from the steering column area...
[URL]...
Noticed the other day when I was backing my GLI out of the garage a clunking or popping noise that sounds like it's coming from the drivers side. It only doesn't it once and only when I am backing out and turning at the same time like out of my garage or parking spot at work. My car has roughly 54 thousand miles on it and still the original suspension.
View 10 RepliesPulling into work today and backing into my parking spot, a fellow employee noticed something odd about my front wheels, so he hopped in my car so I could see the issue.
From a dead stop accelerating forward, the front wheels shift a few inches to the rear, and same thing when backing up from a dead stop they shift to the front. Both sides are doing this evenly. I haven't thrown it on the lift yet but I was thinking a possibly bad dogbone mount. The car has 133K on it and the bone has never been touched.
I got 66,000 miles and I am getting a rattle/popping noise when driving on roads that are bumpy. I thought it might be a strut going bad but somebody told me it might be a Lower control arm rear bushing....
View 2 RepliesAfter euro switch is installed on mk4 gli, the parking lights still remain on with the front fogs.The switch would be in the middle position. So the DRL's are off and just the parking lights are on until the switch is pulled out into position 1. Then the fogs come on and pulling out into position 2, turns the rear fogs on.
View 3 RepliesHaving trouble with front brake pads rattling? About a month ago, I replaced pads - rotors - caliper pins on my 20th GLI. I know these cars ride a bit stiff but it sounds like my front end is about to fall off. All brake parts were torqued to spec - I've gone through all T25/T30 torx front end screws etc and I just can't find the rattle??? This has only started within the last few days. Any other places to check for obvious loose bolts etc?
View 15 RepliesI've got a clicking in my car right now, it's not a constant noise, but only after I've been driving awhile without using my brakes. Slowly gets louder and louder. Goes away completely when I put my brakes on for a second and starts again when I let off of the brakes. Its speed related, so its quicker when I'm going faster.
View 1 RepliesI busted a spring and apparently a strut. The mechanic said I'd need to replace the front suspension, and offered to do it for 1000$ which I thought was very high. Now I am debating whether to simply get a cup kit or coil overs. I am leaning towards the cup kit to save money. Now I am curious what you guys think regarding the H&R cup kit and where I could get the best deal on them.
View 23 RepliesThe front of the hood on the right towards the headlight is rattling pretty bad, but stops whenever I place pressure on the hood on the right side. The hoods shut all the way so I'm not sure whatsup. Not a big deal just pretty annoying.
View 1 RepliesI have a 20th with 106k on it and I notice mostly my right front rubbing on hard turns. Suspension is totally stock other than a 28mm rear sway. Is it possible that's causing it or is my suspension just getting old? No spacer on the fronts.
View 9 RepliesJust got hit with the P0130 code when my CEL came on for the pre-cat o2 sensor. On ecs there are front and rear sensors. I'm assuming front would correspond to the pre-cat that is throwing the code?
View 17 Replies