GTI 337/20th Anniversary :: Rattling Noise From Hand Brake Release Button?
Sep 6, 2010
Having this problem where the button to release the hand brake rattles constantly while driving? The only thing I can think is to replace the spring in it, but Idon't know how difficult that would be. Otherwise my only other thoughts are to find something thing enough that I can slide into it and hope it doesn't ever jam it up.
View 3 Replies
Advertisement
I've got an AE edition GTI which has developed a very annoying rattle coming from the button on the hand brake. I'm trying to disassemble it to get to the chrome covered button which is rattling, but can't seem to get the leather wrapped plastic cover off. I've already pulled the center console out and have tried squeezing, pulling, etc every which way (on the leather wrapped cover).
View 12 Replies
Car was great this weekend, then on saturday, every time I shift my car clunks right near the tranny when I release the clutch. Its a loud noise. Clutch was done around 2500 miles ago. South Bend stg 1 with a LWFW (I know, wish I stayed with a DM). And if I drive in first and second and come off the gas without shifting, it also knocks once really loud. It isn't a back fire or anything it almost feels like the dogbone mount is bad? Also, over 4000 rpm my car sounds deeper sounding than before.
View 7 Replies
Having trouble with front brake pads rattling? About a month ago, I replaced pads - rotors - caliper pins on my 20th GLI. I know these cars ride a bit stiff but it sounds like my front end is about to fall off. All brake parts were torqued to spec - I've gone through all T25/T30 torx front end screws etc and I just can't find the rattle??? This has only started within the last few days. Any other places to check for obvious loose bolts etc?
View 15 Replies
2001 Elantra, Hand brake stuck, is there a release button? I can not seem to release my hand brake. How can I release it so I can make adjustments?
View 2 Replies
I went test drove a R32 today and I noticed when the headlight switch is in the off position, the HID came on when I release the hand brake, is this normal? I thought the DRL suppose to be the inner two halogen lights not the HID. This way, having a switch is kinda pointless except to turn on/off the the instrumental lights because you have the HID on whenever you release the parking brake, doesn't matter if the switch is in the off position or the on/lowbeam position.
View 12 Replies
I just picked up a 20th and it seems when it's running and parked i get this very distinct rattling noise from somewhere in my engine bay. I go to put the clutch down and it stops, as soon as i lay off the clutch it comes back (almost humming) could it maybe be the trans?
View 8 Replies
So I really don't drive my car much during the year since I'm away at college. Once I got back home a couple weeks ago and drove my 20th, i heard a rattle coming from the middle of the car. Jacked it up and starting banging around. The sound is coming from my resonator. Its either the clamp that is busted or the resonator itself. I have to get in closer to see which it is. But I do have a few questions. If I just cut the resonator cut off and weld a straight pipe to that will it be much louder. I have a stock 20th and I'm not really looking for a loud exhaust at the moment. Is it much louder without the resonator? I know if you put a straight pipe in place of the muffler it is MUCH louder so I'm just curious.
View 1 Replies
I recently installed my 3" GHL exhaust along with my stage 1 BFI dogbone and I recently noticed a very faint rattle when I am engine braking. I can only hear it when there's no cars around or when its quite. but i cant figure it out. (I still have the stock exhaust heat shield in from the cat back so I am not ruling that out as a possibility).
View 1 Replies
I have the po411 code, not sure which problem it is but when I first start the car it sounds awful like almost a grinding or rattling noise then stops after a few seconds.
View 3 Replies
went out after checking out the cheap mod thread (to see what I can mess with), went to pop the hood and nothing happened. I've looked all over vortex and I cant find anything.
View 3 Replies
so i have an automatic GLI its my first automatic VW i put a forge DV and carbino CAI on it yesterday, and compared to my Manual cars the air release sounds a whole lot different. it more or less sounds like a horse blowing its lips around. is that normal sound for auto vechiles.
View 5 Replies
Happened on my mk6 now on the 20th! When I go to hit the switch for the gas tank release it is completely silent. Could that be the module? Half a tank left so not to worried about bringing it somewhere.
View 2 Replies
So I noticed a few months ago that a clanking noise came from the front of my GLI when I hit bumps. This noise went away if I had my foot on the brake, so enough vortex searches came up with loose caliper carrier pins.
I ordered the brake stiffening kit last month, but have yet to install it. Now just the other day, I heard this crazy noise come from my brakes entering my garage. It was like a loud 'click" when I engaged the brakes hard enough and I could repeat it many times. I know, I am silly for not getting the kit installed sooner, but I want to make sure that this 'click' is likely related to the carrier pins before I go taking the brakes apart in my garage.
I only ask because my car has 95k on it and is possibly on original suspension, so bushings and mounts might be starting to go.
View 3 Replies
Air condition will not work in my car. The A/c button will light up but will not do anything. The fan speed will only work on high and not on the other settings. I mean when I set it on 1-3 it will not kick on the fan. When I switch it to 4 it will kick the fan on but no A/C still even at that setting.
View 1 Replies
I just put on a magnaflow cat-back exhaust and sometimes when i idle i have a rattle and sometimes it will not rattle. I went under it and shook all around to see if anything was hitting but there was nothing i could see. What could it be?
View 4 Replies
When I hit the unlock button on my key fob or inside the car the one door just doesn't want to unlock.. I have had someone tell me before that i can unhook my battery for 15mins then do something else.. I can't remember what they said.
View 3 Replies
Had it done at 87K years ago. Coolant light came on car had been rattling. Parked and coolant came leaking out. At 157K now was gonna replace belt at 167k, that's 80k since the last job. My guy says had I drove it further would be looking at a new 1.8t.
Does this sound about right to you since it's been 70k since that last timing water pump job. Why didn't the car overheat? Chipped at 40k with apr and very conservative driver. I suppose it just depends on too many variables why the job needs to be done 10k before I originally planned to do it.
View 2 Replies
I recently just put a set of b&g rs's on the car and now it appears that my 3'' exhaust is hitting and rattling/striking the bend that goes over the rear axle, I know I can raise the car and keep it from doing such but that kinda defeats the purpose of lowering the car, Just trying to see if there is something out there, like polyurethane hangers or something along those line that might alleviate the problem.
View 20 Replies
I have a 42 DD tb exhaust. And so far I've used a 3" exhaust clamp over the last hanger (after the muffler) which raised the exhaust all the way up against the heatshield, eliminating the rattle over the rear axle beam. But the exhaust was rattling against the heatshield.
So I bought 15 ft of exhaust wrap and wrapped the section that comes in contact with the heatshield. It worked a bit but it still rattles a little! I hate this rattling! How to get rid of the rattling? Should I just use more exhaust wrap?
View 15 Replies
I've been trying to locate the source of the noise that is coming under the car. Specifically below the handbrake. Like something is lose, took the car to a shop to have it inspected, checked the exhaust, and there was nothing there, all clamps there and screws.
It only happens most of the time when the car is cold and it feels all the way from the hand brake to the stick shift. Sounds like a rattle like something is about to go off from the car but I cant imagine what could be. Couldn't replicate the noise at the shop, only when you are driving and the car is in inclined it rattles really bad until the car gets back to the normal position. Specifically in 1st gear .
View 5 Replies