GTI 337/20th Anniversary :: Rattling Noise Coming From Middle Of Car / Resonator
May 23, 2009
So I really don't drive my car much during the year since I'm away at college. Once I got back home a couple weeks ago and drove my 20th, i heard a rattle coming from the middle of the car. Jacked it up and starting banging around. The sound is coming from my resonator. Its either the clamp that is busted or the resonator itself. I have to get in closer to see which it is. But I do have a few questions. If I just cut the resonator cut off and weld a straight pipe to that will it be much louder. I have a stock 20th and I'm not really looking for a loud exhaust at the moment. Is it much louder without the resonator? I know if you put a straight pipe in place of the muffler it is MUCH louder so I'm just curious.
View 1 Replies
Advertisement
I've been trying to locate the source of the noise that is coming under the car. Specifically below the handbrake. Like something is lose, took the car to a shop to have it inspected, checked the exhaust, and there was nothing there, all clamps there and screws.
It only happens most of the time when the car is cold and it feels all the way from the hand brake to the stick shift. Sounds like a rattle like something is about to go off from the car but I cant imagine what could be. Couldn't replicate the noise at the shop, only when you are driving and the car is in inclined it rattles really bad until the car gets back to the normal position. Specifically in 1st gear .
View 5 Replies
My 337 didn't pass inspection (control arms, inner tie rod, no cat because the guy I bought it from sucked etc) but it sat for probably 3 weeks and I just sold my other car (I was planning on using that $2000 to get the 337 to pass inspection) but I just drove the VW down the street for the first time and it's making some scary sounds.
Basically when I give it throttle there's a high pitched whirring sound and something keeps rattling that sounds like its coming from the engine bay. I'm really freaked out, I'm leaving in two months because I'm transferring to a new college and I need this thing to run perfectly.
It's also shifting a little strangely and if you don't shift absolutely perfectly then it starts to rattle (not like you're about to stall but something completely different) I can't take it to a VW dealer or anything because I'm way over the 15 days past a failed inspection and I can't afford a tow.
View 2 Replies
I just picked up a 20th and it seems when it's running and parked i get this very distinct rattling noise from somewhere in my engine bay. I go to put the clutch down and it stops, as soon as i lay off the clutch it comes back (almost humming) could it maybe be the trans?
View 8 Replies
I have a 2011 F150 FX4 with the traction control. When the tires spin (like taking off on a hill in the rain - that's when i noticed it) and I let off to let everything settle down, I hear a rattling kind of noise coming from the middle dash area, maybe on the engine compartment side of the firewall. It sounds like a rubber ball in a box being jostled around. What this might be?
View 3 Replies
I recently installed my 3" GHL exhaust along with my stage 1 BFI dogbone and I recently noticed a very faint rattle when I am engine braking. I can only hear it when there's no cars around or when its quite. but i cant figure it out. (I still have the stock exhaust heat shield in from the cat back so I am not ruling that out as a possibility).
View 1 Replies
Having this problem where the button to release the hand brake rattles constantly while driving? The only thing I can think is to replace the spring in it, but Idon't know how difficult that would be. Otherwise my only other thoughts are to find something thing enough that I can slide into it and hope it doesn't ever jam it up.
View 3 Replies
I have the po411 code, not sure which problem it is but when I first start the car it sounds awful like almost a grinding or rattling noise then stops after a few seconds.
View 3 Replies
Drove ~1500 miles this week, from MN to MA. While driving through PA my left headlight died in the middle of the night while raining. I ended up fixing it after spending an hour at a gas pump for shelter. Also in PA I randomly stopped.
View 14 Replies
So there's been a noise coming from what seems like the transmission for some time now.Here is how it began...One day I was reversing and noticed this clatter/grinding/vibrating noise coming from underneath my car. It only happened in reverse.However, now it's happening in all gears but not when accelerating, ONLY on deceleration in gear.
There's no clutch slipping, no noticeable loss in power, etc. Just the noise.I don't want to start replacing things left and right hoping it will fix it so throw-out bearing, trans mount, flywheel, etc?
2004.5 GLI 1.8T O2M. Transmission hasn't been touched from what I know of (bought the car w/ 37k, now has 77K),
View 6 Replies
Have a noise coming from their engine bay that kind of sounds like a bird chirping, but when you depress the clutch, it stops?
View 10 Replies
I just picked up a 20th about a month ago. It has 50k on it and recently I've noticed a faint whining coming from under the hood, most noticeable under idle and it changes pitch when I turn the wheel. I check the P/S fluid and it was low so I topped it off and I believe it has improved a bit but not too sure because I haven't gotten a chance to drive it yet. The steering does feel a little heavy but I figured that's normal because, well it's not a cadillac.
View 1 Replies
I had a friend check out a noise coming from my engine, and he said he thought it was an "idle pulley", and another friend say it sounds like my injectors. Its kind of a tinny sound and it gets louder as my RPM's go up. I dont know where to begin for diagnosis, but I heard it on a different Jetta about a week ago.
View 4 Replies
Very weird indeed...our 20th AE sometimes will give off this very light horn noise that appears to be coming from the passenger rear tire area...I looked around and couldn't find anything..
The noise is very faint, and repeats in a beep, beep, beep and the longer it goes on, the more space between beeps....very weird.
View 11 Replies
I was driving yesterday going up a hill in lower gear... i think 3rd... and had the RPM's up sort of high, I heard a noise that sounded like if you stuck a stick into a fan...smoke also came out of the exhaust when pressing the gas.. smoke has come out before but I got my oil changed figured it might have just been burning off some oil.... I was thinking the catalytic converter??
View 2 Replies
When I drive my car past about 3000 rpms then let them fall i hear an odd sort of vibrating noise coming from the turbo between where ever I rev it up to and about 2600 rpms. Is this normal? Its fairly quiet and can only be heard without the radio on and if your listening for it. This worries me because I've only had this k03 for about 5000 miles .Some background info I am chipped with uni at 20psi, full 3" turbo back and an 007 dv.
View 3 Replies
I just put on a magnaflow cat-back exhaust and sometimes when i idle i have a rattle and sometimes it will not rattle. I went under it and shook all around to see if anything was hitting but there was nothing i could see. What could it be?
View 4 Replies
So your clutch pedal operates properly, the clutch engages with no issues, but this annoying squeak, snap, crackle, and pop noise keeps coming from the clutch pedal within the cabin.
Could it be your clutch master cylinder? CMC is not leaking in the engine bay and the driver footwell. Not the CMC.
Could it be your clutch switch that's used to control revs and cruise control? Removed it and clutch pedal still made noises when pressing and releasing the pedal. Not the CS.
Could it be the over-center spring that sits behind the clutch pedal assembly? How could it be? It's just a spring. Springs that compress in that orientation don't make snap, crackle, and pop noises.
What most people fail to realize is the noise is coming from the pedal assembly, but it's not the pedal structure or the pedal. It's the pivot point where it mates with the clutch pedal mounting bracket. At the pivot point are two bushings (one on each side of the pedal structure) that wears out over time creating these noises.
Please look up the part number for these bushings. They look like the following at this link but these are aftermarket upgrades for BMW's.[URL] ....
View 4 Replies
Had it done at 87K years ago. Coolant light came on car had been rattling. Parked and coolant came leaking out. At 157K now was gonna replace belt at 167k, that's 80k since the last job. My guy says had I drove it further would be looking at a new 1.8t.
Does this sound about right to you since it's been 70k since that last timing water pump job. Why didn't the car overheat? Chipped at 40k with apr and very conservative driver. I suppose it just depends on too many variables why the job needs to be done 10k before I originally planned to do it.
View 2 Replies
I recently just put a set of b&g rs's on the car and now it appears that my 3'' exhaust is hitting and rattling/striking the bend that goes over the rear axle, I know I can raise the car and keep it from doing such but that kinda defeats the purpose of lowering the car, Just trying to see if there is something out there, like polyurethane hangers or something along those line that might alleviate the problem.
View 20 Replies
I have a 42 DD tb exhaust. And so far I've used a 3" exhaust clamp over the last hanger (after the muffler) which raised the exhaust all the way up against the heatshield, eliminating the rattle over the rear axle beam. But the exhaust was rattling against the heatshield.
So I bought 15 ft of exhaust wrap and wrapped the section that comes in contact with the heatshield. It worked a bit but it still rattles a little! I hate this rattling! How to get rid of the rattling? Should I just use more exhaust wrap?
View 15 Replies
