GTI 337/20th Anniversary :: No Driving Power Suddenly In Any Of Gears Including Reverse
May 4, 2014
So while I was in gear i felt a thunk and suddenly the car had no driving power in any of the gears including reverse. Pulled over popped the hood and checked my linkage. Everything was still connected as far as i could tell. Had my buddy watch the linkage while i shifted through the gears, everything checked out normal. While in gear the car still rolls so obviously something internally isn't jivin. Haven't gotten under it yet, doubt that will tell me anything. 130k miles had her for less than a year haven't gotten around to picking up a bentleys yet. I'll grab one tomorrow since nothings open today.
View 5 Replies
Advertisement
So ive had the car for a couple months now, daily driver. Fixed a couple minor things here and there. I bought a K&N drop in filter the other day took it for a spin and when i was shifting from 1st to 2nd my second gear seemed empty. nothing. didnt grind or feel rough at all. just didnt have a gear. then i tried 1st and same result. before this my car was running great clutch felt strong and i was having alot of fun with my car. I even tried resetting my linkage and checked the cables inside and by the tranny.
1st and 2nd are gone
View 3 Replies
I drive a 1998 honda civic 5 speed manual transmission. The transmission is loud in all gears(including reverse) nearly all the time. It is not exactly a grinding sound, but that is as close as I can describe it. When taking off from a stop, sometimes it won't initially make the sound, but around 15-20 mph it will start to make the sound in 1st or 2nd gear. Once the sound starts, it won't go away. I can't link the time when it starts making the noise to any particular RPM.
I've hard the car for 5 years and 50,000 miles and it's made this noise the whole time I've had it. It is annoying more than anything (shifts smoothly, clutch not slipping). Someone who looked at my car shrugged his shoulders and said "when the clutch goes, put in a whole new transmission, that will probably fix it".
View 8 Replies
About a week ago I noticed my RPMs suddenly dropped while I was driving. a couple days later after driving the highway for about 45 mins, averaging probably 80-90mph, I got into town and I stopped for a car to park. Then it just stalled, I didn't notice a kick back, it's like the car just shut itself off. It took probably 10 attempts to start again. About a mile down the road it did the same thing pulling up to a stop light. I sat through 2 light cycles before it started again.
Got to my destination was there for maybe an hour, when I left the car started fine. Drove for about another hour on back roads when the Rpms started dropping again and I would need to dump the clutch to get them to go back up. Then my screen started beeping telling me to STOP with and oil pressure alert. I ended up driving the car home dumping the clutch whenever the rpms would drop. Once I got home I had my boyfriend take it out and nothing... Of course... A couple days have gone by and it hasnt been as bad but it still drops every now and then, and today after driving home maybe 5 miles it stalled again...
I've plugged it in and my speed sensor is throwing codes, but I don't think that's the entire problem. Whenever my car acts up the EPC light comes on but no check engine light so far. 2005 Jetta GLI 1.8t.....
View 2 Replies
Purchased my first VW. I bought a 2003 IY 20th AE with 83k mi.
Two days ago, i'm picking up a friend at their house and as i go to take off from a complete stop- 1st gear revs up as if the car were in neutral, same thing with 2nd gear. 3rd-6th work normally and so does reverse. I called the dealership and they guy says that since the car was bought 'As Is' he can do nothing for me, but try and get me his price on the repair (which i think is complete BS).
I've had a couple people try and tell me a few things that could be causing the problem, like throw out bearing, or maybe the shift fork. i would say that i know a little bit about cars, but i've mainly worked on honda's or other japanese cars so i feel a little lost under the hood of a vw still.
View 6 Replies
I got a 337 and not sure if the trans is going or not. it shifts all gears but the first 3 are sketchy and sometimes they're hard to get into gear. it feels like I am hitting something in the way when i shift but other times its smooth like butter. I do have some shaft play. never pops out of gear either. could it be the linkage? the shift fork? slave cylinder?
View 5 Replies
I was driving my car to a local GTG the other night and about 3/4 the way there i went to go put it first and it wouldn't go into any gear .... I summed it up to being either the tranny the clutch or the linkage....
My only clue is that i can rotate the shift knob in a circular motion.... the clutch petal still feels normal ... and under the hood when you try to move the linkage manually into gear the side to side part hits the motor mount (metal to metal)....
View 14 Replies
Mark IV GTI. Neuspeed intake, chip, exhaust. The situation is...
When driving enthusiastically, harder, and sportingly, the car runs beautifully!
When driving normally, such as highway cruise or lower speeds with a consistent throttle input, the power will cut-out. Then the max boost pressure will be approximately 3 psi until the key is cycled. Then normal chipped operation resumes. Since it is difficult to drive hard all the time, this circumstance comes up often.
There is a new N75 recently installed. The situation does NOT set off the check engine light.
I have noticed according to the boost gauge readings, it tends to happen between 10 inHg to 0 psi. Above or below that, don't recall it happening.
View 1 Replies
For some reason My car won't boost like it used to in the upper gears. 1st, 2nd and even 3rd I can still boost around 18 but once I go 4th, 5th, 6th my boost get lower and lower to the point the I get only 10psi in 6th gear. The car also seems slower a doesn't spool that fast like it used. i checked most of the hoses, even my intercooler pipes which were leaking before and everything is tight. Could it be my DV which is still stock or should I look someplace else?
View 13 Replies
was diriving my toy1and was shifting from 3rd to 4th when the rpm reved up and the car would not take any gears to drive foword or revers my gears when you shift are engagging but no mvement also i dont have to push the clutch in to shift it will go with out clutching.
View 9 Replies
Car (04 GLI) was running completely fine for the past few months (since I bought it) and I get off work last night and it doesn't start. Lights/accessories turn on fine. Got the battery tested and it's fully charged. Alternator was tested 2 months ago and was perfect. I assume it's the ignition switch/starter. Had to get it towed. God that horrible noise when a lowered car is pulled onto a flatbed. The guy was nice and tried his hardest not to mess anything up. Will update once I find out the issues.
View 10 Replies
First off i couldn't get the car into reverse to back out of a convenience store and then i let off the clutch to try and pump it again and the car just dies. drove just fine up until i parked. Now when i try to move through gears it sounds like it's shifting but the car doesn't move. The car does have a stronger clutch and unitronic chip if that would have to do with anything.
View 13 Replies
I am hearing a rumbling noise when I hit 4000 rpms on all gears worst in 2nd and 3rd.... I just recently replaced the timing belt, TBA Done, valve cover gasket, and passenger side axle (through raxles). Anyways I started hearing noise after those repairs, my mechanic has gone through all the work recently done and cant find the problem..... We replaced the tranny mount thinking it was that, but no luck.... I have not lost boost, and noise starts 4000k and goes away at 4700k No codes are flashing.
View 5 Replies
sometimes when i switch from 1st to 2nd or 2nd to 3rd i get a loud popping noise like my exhaust is hitting the under side of the center column. I have had the car on a lift and shook the hell out of the exhaust...it's not moving enough to cause that loud popping...so i figured it could possibly be the dogbone mount gone and the downpipe is hitting when i shift because the mount is bad?
Or could it be one of the other mounts...I'm going through a divorce right now and really really broke so i need to make sure i get the right one and fix it right the first time. What mount it is if not positive its the dogbone?
View 4 Replies
I have 20th gti and I downshifted into third the other day and heard a small grind and all of the sudden I lost all my gears, I couldn't shift into anything and was stuck in third. I was able to move the shifter up and down from 3rd neut to fourth without engaging the clutch but it was all the same gear:S I managed to get home in third considering I was close by and when I stopped i was able to throw it into reverse but it would act like i was in a high gear(either 4th 5th or 6th I am not sure).
View 4 Replies
I took my car to a shop today to have some engine stuff checked out. One of the mechanics noticed the vacuum levels would drop to 28-30 hg when changing gears or going into neutral. Is this normal?
View 2 Replies
I get up to go to work today and the car runs fine, a few hours later i get back in, try to put it in reverse, and nothing.. it wont let me shift in after i push it down. So i push it back in neutral and drive away.. every gear works fine, when i got home i took off the boot, tried to see if anything was loose, shake it a few times and out of nowhere first and second give. They were working perfectly 5 min before, and now they just feel really loose, but every other gear works fine, so now I have no reverse, 1st or 2nd. Did I just knock something out of alignment or is the problem a lot worse.
View 3 Replies
So I get in the car to move my car this morning and I can't get the car into 1st gear. It turns out I can't get the car into reverse, 1st gear, or even 3rd gear. It feels like something is blocking me from even approaching those gears, however the others (2,4,5,&6) seem to be fine.
View 14 Replies
I have a 20th ae Gti. When i bought the car it has installed a EIP Short Shifter and it was working fine, But... Yesterday i cant shift to reverse. So i decide to take a look since that was the first time that i have a problem with that, i thought that was something wrong with the Short Shifter so i decide to see how to install the Short Shifter so i can Re do it all by my self and now i cant Find any gear, No reverse, no 1st no 2d not even neutral.
View 2 Replies
So i went to start up my car after about an hour of not driving , (previously working fine) and I am not able to shift into reverse 1st or 2nd , ive been looking around and i guess the options are linkage, gear selectors, gear box or tranny.... Its a 337 so its a 6 speed . don't know if that makes a difference
View 2 Replies
Been having trouble shifting into any gears on these chilly mornings in VA now... The clutch has been sticking on its way out when I release it and the gears don't want to engage unless I really push hard on the shift knob.
View 11 Replies
