GTI 337/20th Anniversary :: How To Remove Shift Guide On GLI
Dec 21, 2010
Mine broke and needs to be replaced but i can't find any directions on how to remove it.
View 9 Replies
Dec 21, 2010
Advertisement
GTI 337/20th Anniversary :: How To Remove ECU
I was following the directions on the APR site to remove the ECU and it seems to not make sense. Saying the ECU is on the passenger side underneath the molding....
is the ECU in the center?
GTI 337/20th Anniversary :: How To Remove RC Center Caps
how do I do it? I can't twist them off and I'm weary about trying to pry them out.
View 3 RepliesGTI 337/20th Anniversary :: How To Remove The Center Console
I cannot get the back cup holder section out. It seems like it's held on there good. I removed the little coin tray and don't see anything and took out the sliding cup holder as well. What am I doing wrong?
View 2 RepliesGTI 337/20th Anniversary :: Efficient Way To Remove Stock Shifter?
So I have been looking but cant really seem to find an efficiant way to remove my stock shifter.
View 1 RepliesGTI 337/20th Anniversary :: How To Remove Climate Control Panel On 2003 GTI
My climate control panel switch only works in 4. How do I remove the panel?
View 1 RepliesGTI 337/20th Anniversary :: Can't Shift To Reverse
I have a 20th ae Gti. When i bought the car it has installed a EIP Short Shifter and it was working fine, But... Yesterday i cant shift to reverse. So i decide to take a look since that was the first time that i have a problem with that, i thought that was something wrong with the Short Shifter so i decide to see how to install the Short Shifter so i can Re do it all by my self and now i cant Find any gear, No reverse, no 1st no 2d not even neutral.
View 2 RepliesGTI 337/20th Anniversary :: Not Able To Shift Into Reverse 1st Or 2nd?
So i went to start up my car after about an hour of not driving , (previously working fine) and I am not able to shift into reverse 1st or 2nd , ive been looking around and i guess the options are linkage, gear selectors, gear box or tranny.... Its a 337 so its a 6 speed . don't know if that makes a difference
View 2 RepliesGTI 337/20th Anniversary :: Cannot Shift Out From 2nd To 3rd Gear When Going At 25mph
Yesterday I went to shift from 2nd to 3rd real easy going like 25mph and i couldn't shift out of second. I could wiggle the shifter up and down but barely side to side. Even when moving it up and down it didn't feel like it was engaged in any gear although it was apparent I was stuck in second. Clutch feels normal and still grabs well.
So after driving only in second all the way to my uncles shop I sit at school waiting to see where i can pour more money into the GTI. Its a 20th ae totally stock tranny, I don't know a whole lot about transmissions but possibly the linkage got messed up? I didnt hit any big bumps or anything before it happened.
GTI 337/20th Anniversary :: Removing Shift Knob?
How to remove the OEM "golf ball" shifter on a 20th AE? I tried everything but it still won't budge. Is there a trick to removing it? Is it a tight press fit or does it screw on?
I have the latest edition of the Bentley repair manual and it does not cover this shifter knob.
GTI 337/20th Anniversary :: Shift Knob Removal?
I was looking through the DIY and I couldn't find one that just removes the knob it self. I know its all the same steps to remove everything but everyone just swapped the boot and everything. I want to keep my boot and just change the knob to a solid glass ball.
View 1 RepliesGTI 337/20th Anniversary :: Tranny Won't Shift Into 2nd / 4th And 6th Easily
I am having trouble shifting my 6 speed into 2nd, 4th, and 6th. I got my clutch replaced about a year ago, not sure if that makes a difference. Any fixes short of bringing it to a shop?
View 1 RepliesGTI 337/20th Anniversary :: 1 - 2 Shift Fork Failure
Looks like the 1-2 shift fork failed on my 337. This is the 2nd time this has happened to my car in under 100,000 miles of driving (I'm the original owner). The last time was about 3 years ago and the shop I was going to found a used transmission for me. Just curious, how common this happens to our 6-speeds.
View 4 RepliesGTI 337/20th Anniversary :: Shift Into Second Gear Car Won't Feel As Smooth As First
I had my shift fork and 1 and 2 gear synchros replaced. Whenever i shift into second it doesnt feel as smooth as first. when i hold the clutch longer and put it into second it feels smoother.
View 2 RepliesGTI 337/20th Anniversary :: 6th Grinds, Make A Noise When Shift In?
So there is an imowa 20th that im really interested in, 100k chip and exhaust. But there is a problem that could be a deal breaker
He says that 6th grinds when you go into it, it has no problem getting in but it makes a noise when you shift in, best guess is that its a synchro problem. This would not bother me so much if this wasn't an 8 year old limited edition sporty hatchback with a transmission unique to the standard gti.
GTI 337/20th Anniversary :: When Shift It Sounds Like Air Is Coming Out Of Intake
So, I just installed a ESE cold air intake on my gli...and when i shift it sounds like air is coming out of the intake. make sense? is this normal? Also, how high is the risk of a hydrolock?
View 15 RepliesGTI 337/20th Anniversary :: Gear Shift Won't Go Into The Slot For Reverse
So the other day was driving my car... And he said reverse quit working. I'm nowhere near my car right now, but it sounds like the same thing that it had done for me a few times. Basically, the gear shift won't go into the slot for reverse, and even first is hard to get into sometimes. Sometimes it works and sometimes it doesn't... My car's a 337 with an O2M transmission.
View 3 RepliesGTI 337/20th Anniversary :: Hard To Shift Or Just Pops Into Gear From 1st To 2nd
Sometimes (most of the time), when I shift from first to second, its either hard to do or it "pops" into gear. There's not like a grinding gear but it sounds like it is hitting something as it goes into gear. If I go 1st to 2nd while stopped, it goes in nice and smooth. It sort of feels like how you can't shift into 1st while you are moving slowly, you have to push on it a bit and then it finally pops in.
View 8 RepliesGTI 337/20th Anniversary :: Both Front Wheels Shift A Few Inches To The Rear
Pulling into work today and backing into my parking spot, a fellow employee noticed something odd about my front wheels, so he hopped in my car so I could see the issue.
From a dead stop accelerating forward, the front wheels shift a few inches to the rear, and same thing when backing up from a dead stop they shift to the front. Both sides are doing this evenly. I haven't thrown it on the lift yet but I was thinking a possibly bad dogbone mount. The car has 133K on it and the bone has never been touched.
GTI 337/20th Anniversary :: Hard To Shift Into Second Gear At Cold Startup
It all started after it being cold outside it's hard to shift into second gear when i first start up the car, and then after a couple shifts like that i get a notchy shift. after a while of driving it all disappears.
View 3 RepliesGTI 337/20th Anniversary :: Shift Fork Stuck In 3rd / No Neutral Or Reverse
Well, like the title says, The trans is stuck in third gear, with no other gears, or neutral or reverse. The car is slightly modified 02 GTI 337. APR Chip, Forge TIP, Full 3" exhaust, Greddy FMIC. I definitely drive the car, and had been beating up on it on the highway for a little on my way in to work, then on the way home, down shifted to pass someone, dropped it third, passed them, went to shift to fourth, Shifter moved, felt like it engaged "a gear" and then then i let off the clutch and it was still in third.
I also noticed that unless, I press the clutch in the, the car stays in this gear, even when the shifter is in neutral. I looked at the linkage, and it appears to be functioning. I did some reading around the Vortex and it seems like this might be a shift fork problem. Also, if the trans will be apart, what items should be upgraded?