GTI 337/20th Anniversary :: Horn Stuck On When Start The Car
Mar 2, 2016
Weirdest thing happened this morning. I went to start the car and the horn was immediately on. I figured maybe the steering wheel was stuck. Anyways it went for a bit then while I was on the highway it came on and stayed on. People were looking while I'm going 60mph with the horn blasting. Anyways it went off on its own. I checked the fuse today and it is blown. I no longer have a horn. Why this happened? I will take the steering wheel off tomorrow to check the grounds.
View 4 Replies
Advertisement
The horn doesn't work, but when I lock the car I get the "honk" from the factory alarm...
Long story short...car got broken into, radio stolen, n00b-dumbass radio installer from the insurance company was fuddeling around with the fuse box to power the radio via a 12v source (again...long story). His hands were also behind the kick panel below the steering wheel to run some wires. I only noticed the horn not working a few days after this guy worked on my car. Coincidence?
Is there a fuse / relay that goes bad with our horns?
View 4 Replies
Very weird indeed...our 20th AE sometimes will give off this very light horn noise that appears to be coming from the passenger rear tire area...I looked around and couldn't find anything..
The noise is very faint, and repeats in a beep, beep, beep and the longer it goes on, the more space between beeps....very weird.
View 11 Replies
Happened first yesterday. The rpm and speed gauges get stuck at the 10 o'clock position. Seems all the lights come on. I can accelerate for a bit but the car just putts and then turns off. After that i try to start the car and nothing. If i take the ground of the battery for 10 min (ecu reset?) the car starts right up but any sooner and it wont start. I have APR stage 1 flash, cat back exhaust, drop in filter, forge hybrid valve, and Boost gauge.
View 4 Replies
I parked the car yesterday and everything was working fine. I go out this morning to go to work and i cannot get the car to go into reverse. I put it in neutral and attempted to push it out of my parking spot, but when I took my foot off the clutch, it stalled like it was still in gear even though the stick was in the neutral position. While still in the neutral position, i can still move forward as if it were in first. When i put it in reverse and attempt to move, i get no movement. I can get it to move forward, but it refuses to go into reverse. I have no diagnostic lights illuminated and the car has no issues running or starting.
View 14 Replies
50k Miles on my clutch. Was driving a couple weeks ago on the highway and clutch stuck to the floor. At first I thought it was my Slave cylinder. Got the trans out this weekend to find the mess (below) inside my bell housing. Obviously need a new clutch now and will still replace the slave while I am in there.
Cars setup is around 375ish whp. I know I could spend 1300 bucks and call it a day for a clutch master or south bend but was seeing if there is a cheaper alternative.
Also If I were to buy an OEM clutch or an upgraded one that was not rated for up to 400~whp would it drive and pull the same as a fully upgraded one just not last as long?
6 Speed ...
View 3 Replies
So last night I was driving home from work, and at a red light while i was waiting to go i had my clutch down when light turned green i tried to go and noticed i could not put it in gear and that my clutch pedal was stuck in place. i didn't know what to do so I checked my shifter plate everything looked fine so went to look at the pedal and i pulled it forward and it came lose. I started it up everything was fine and back to order. This morning going to work same thing happened again, I don't know what is going on and what could be the cause?
View 5 Replies
Well, like the title says, The trans is stuck in third gear, with no other gears, or neutral or reverse. The car is slightly modified 02 GTI 337. APR Chip, Forge TIP, Full 3" exhaust, Greddy FMIC. I definitely drive the car, and had been beating up on it on the highway for a little on my way in to work, then on the way home, down shifted to pass someone, dropped it third, passed them, went to shift to fourth, Shifter moved, felt like it engaged "a gear" and then then i let off the clutch and it was still in third.
I also noticed that unless, I press the clutch in the, the car stays in this gear, even when the shifter is in neutral. I looked at the linkage, and it appears to be functioning. I did some reading around the Vortex and it seems like this might be a shift fork problem. Also, if the trans will be apart, what items should be upgraded?
View 10 Replies
Yeah it was stuck in the "up" position, just running forever. Turn the car off and just keep running. So I took it apart and un-plugged it.
I plan on swapping it for the drivers and see if it follows the mirror motor. Yeah, I been getting dead battery and this is why.
View 2 Replies
Changing the oil in my friends gli tonight and the drain plug ended up becoming stuck in the oil pan hole, just spinning in both directions and not tightening or loosening. He has the hybrid oil pan, and we took the bottom steel part off, do they sell just that part so I could fix the stripped drain hole, or should I try and salvage the one I have now and rethread the hole with a bigger drain plug?
View 1 Replies
Happened on my mk6 now on the 20th! When I go to hit the switch for the gas tank release it is completely silent. Could that be the module? Half a tank left so not to worried about bringing it somewhere.
View 2 Replies
My car wont start I have replaced the coilpacks, ecu relay, and had the immo defeated. Here is the vag log [URL] .....
View 2 Replies
I get EPC and ASR upon cold start from time to time. Usually EPC goes away if I restart in a couple of minutes. ASR goes away after a while and restart.
So after car warms up and restarted, everything seems fine.
View 2 Replies
The car is a 2004.5 GLI 1.8t. My car threw a CEL about two weeks ago. When i ran the codes it had one for the camshaft position sensor, one for the secondary air injection, and one for the camshaft position sensor. I cleared all the codes and the light came back on. The only code that came back was the camshaft position sensor P0340 i believe. I drove the car for a week and out of nowhere it just shut off on me while driving.
All the lights on my dashboard were flashing (traction control, battery light, engine light, etc.) I tried to jump it just to see if it would turn over and still nothing. I rolled it down a small hill and tryed to pop start it...still nothing. So I had it towed to my house and I replaced the cam position sensor AND the crankshaft position just to be safe. but now the car still won't start...
The engine is cranking and you can hear the pistons moving but it just can't get the juice to start. After failing to start it 3 times, i noticed a loud vacuum like noise coming from the engine when i turned the key off...but my car would do that every other morning when it actually started and didn't have the CEL, and then once it warmed up the sound would go away.
View 1 Replies
So my 20th randomly won't start. It's happens about once a week or so. Most of the time when it happens the car cranks but doesn't start. Every once in awhile when I turn the key nothing happens at all and I have to keep trying and it'll crank and turn on. I also have no way to check for codes
View 6 Replies
I have a perplexing problem and I'm at wits end trying to figure it out. I have an 03 GTI 1.8t 20th. The car has been running great until today when I replaced a few bolts with the front bumper and replaced a motor mount bolt on the passenger side mount. Everything was great until I did the work on it. I figured I had bumped the cam position sensor so I swapped it out for a new one and nothing still. I have verified I have spark and I definitely have fuel as it keeps drenching the spark plugs. I have cleaned the spark plugs and tried starting only for the car to violently sputter and misfire. No codes are being recorded and nothing else has been touched.
View 9 Replies
So I just recently got a 2005 GLI and I have been taking care of all the maintenance first before I start modding it. But there is one thing that I can't seem to figure out and I have searched but can't find this exact problem anywhere. My problem is I will have to turn the key several times before it starts, it does turn over but will not start until about the 4th or 5th attempt. This will happen maybe once a day but sometimes it will be fine all day long. Also the ESP light comes on once the car starts but doesn't come on if the car starts normally. Now I have seen people saying ABS/speed sensor might be bad if the ESP light comes on but mine isn't always on. Just when I have trouble starting it and then it goes off once I turn the car off and back on.
For those that don't feel like reading:
- Car sometimes (once in a day or two) turns over 4,5 times before it starts
- ESP light comes on when it has trouble starting
And of course, here is a picture of the new-to-me ride .....
View 17 Replies
Car (04 GLI) was running completely fine for the past few months (since I bought it) and I get off work last night and it doesn't start. Lights/accessories turn on fine. Got the battery tested and it's fully charged. Alternator was tested 2 months ago and was perfect. I assume it's the ignition switch/starter. Had to get it towed. God that horrible noise when a lowered car is pulled onto a flatbed. The guy was nice and tried his hardest not to mess anything up. Will update once I find out the issues.
View 10 Replies
I have a question? I have had my car parked for about 2 1/2 months and I just started it this weekend and I've always noticed on our cars when we start them in the morning I think it's the secondary air pump that turns on, it sounds like a blow dryer.. It only stays on for about 10 seconds maybe. Cause when I started my car this weekend I didn't hear come on.
View 3 Replies
Revo stage 2 --1.8t ... For the past few days I have tried to figure this issue out I am having with my 337. The car takes 2 or 3 times to start from being cold. Once its started it has no issue it drives awesome, pulls hard no codes when vag com'd. Can start it up anytime with ease for the rest of the day. Tried doing to solve:
-I have pretty new coilpacks---FSI- they are ok
-Spark plugs are 3 months old --checked those
-Checked Battery and its all normal and no issue
-Cleaned the throttle body = No change
-Installed new CTS yesturday (green) < no change
-Cleaned the MaF = NO change in start up but car runs way smoother
-Put in new Filter= No major change
-Did the Crank sensor under a month ago (Bosch)
I have a few more things on my list to check :
1. Fuel pump relay
2. Fuel Pressure Reg
3. ECU relay/ check immobilizer
4. Fuel Pump
View 5 Replies
Ok, car won't start. fuel pump not priming. tested the fuse, no power coming to it, fuse is good. even used another fuse. my flex connection on my dp blew out, rusty had a leak there for a while. in any case patched it up McGyver style till a new dp arrives. I backed the car off the ramps and shut it off to clean up. when I went to test drive it fuel pump wasn't priming.
View 1 Replies
