GTI 337/20th Anniversary :: Cannot Get Out Of 4th Gear When Pulling Out Of Driveway
Jan 5, 2005
Went to leave the grocery store and as im pulling out I can't get out of 4th gear. After I got home I was able to work it into neutral and I can obtain 2nd, 4th and reverse but the throws aren't straight and it won't go into another gear unless you would force it. There is virtually no side to side travel in the shifter. What could this be? I drive my car hard but I've never missed a shift or grinded the clutch and I wasn't beating on it before it happened.
View 13 Replies
Advertisement
OKay, so it's not that cold out here but my exhaust still puts out white smoke so it looks like it is winter time. I didn't blow some seals on my Turbo. And how to fix it?
View 9 Replies
I just recently put in an APR chip on my o4 gli from one of their dealers, a day or two later I noticed when I try to accelerate fast my check engine light comes on and the car starts pulling back. That was almost a week ago, today I went back to the same place to get a short shifter, I told them the problem while I was there and they said it was my coil packages. I replaced all 4 and im still having the same problem...
View 2 Replies
I have an APR stage 1+, HPPF, Carbonio intake. First thing EVERY morning my car will give a noticeable hesitation when pulling out of my driveway. After this 1 time event, the car rides perfectly. It happened every day. I was told this is gas pooling or some such issue.
View 11 Replies
Driving home from work, I was about 5 minutes from home, got to a light only to not be able to go into 1st. I popped it into 2nd and drove home like that pretty much. Car will let me get into reverse and all other gears.
I can put the shifter towards first but it doesn't fully go in and when I gave it gas it would let me start to creep and then grind a little and pop out.
Heres a pic for your click .....
View 24 Replies
I have a problem with my 20th anniversary gti. My 1st and 2nd gear won't work. Every other gear works fine, the gears never grind before or any unusually noise. I was pulling off my driveway and they just stop working. Even when the car it's on I can move my shifter to 1st and 2nd without the clutch and nothing happens.
View 3 Replies
So I get in the car to move my car this morning and I can't get the car into 1st gear. It turns out I can't get the car into reverse, 1st gear, or even 3rd gear. It feels like something is blocking me from even approaching those gears, however the others (2,4,5,&6) seem to be fine.
View 14 Replies
I bought a rebuilt trans from a fellow vortex member a little over a month ago. I had it installed and ever since then when I am getting on it going from second to third it grinds a little bit going into third gear. It only does this when i get on it, but when im just cruising its fine. Could the shift linkage just need aligned? Or what else could it be?
View 5 Replies
As of two days ago my car ust refused to go into 1st gear. I know that it is a common occurrence with the 02j and shift fork, but 2nd works perfectly, so how could it be that shift fork?
View 16 Replies
So I've been noticing that my GLi is tough to put into first gear sometimes. I feel almost like I have to jam it in place and hold it there, it doesn't just click in. Could this be the shifter cable ends or the cables themselves? Its weird... its only ever been a problem for 1st gear though.
View 15 Replies
I was driving home and noticed that it seemed harder to shove the gear shift into 1st gear. I stopped on the way home and discovered that I couldn't put the car into reverse, when I tried, and then started to drop the clutch and go in reverse, it was as if the car was locked into both reverse and a forward gear, the engine would bog and the car wouldn't budge.
I popped the hood and checked the shift rods and they looked OK, no obstructions or broken parts. I played with the gears for a bit and finally reverse gear suddenly started working again, but now 1st and 2nd gear are gone! it does not feel as if it's engaging the gears at all, the lever moves free. No different than having it in neutral. 3rd gear and above all still work OK, so I had to use 3rd gear to get the car moving.
View 12 Replies
I had my first and second gear go out on my gti over a month ago, it sat at my house for a little over 2 weeks. When I finally was able to take it to the transmission shop it needed a jump. A week later my transmission was rebuilt and clutch replaced. Car needed a jump when leaving the shop too.
I took it home and a bit later tried to go somewhere and... nothing. Completely dead, won't charge or be jumped. Sunroof was half open and windows cracked. Rained that night so I had a make-shift cover with trash bags and a container top. (I don't know if this matters but just in case it may be water related.)
The next day I got a new battery and changed it. Car worked fine for 2 days. This morning I tried to start it and it fluttered and battery completely shut off. Jumped it and tried to take it around the block after few and it shut off mid drive, but was able to restart while rolling. Then when I pulled over and hit the four ways it immediately shut everything off again. I had someone come with cables so I could just get it home, and as soon as I connected the red cable to + it sparked and the lights and everything turned on, started right up. (the jumper cables were not connected to anything on the other side)
Finally I got it back home and when I pulled into the driveway and stopped I hit the window buttons and boom, everything off again.
Confusing story, but what could be wrong? I included everything just in case. (I have 2 keys, one which keyless entry works and one which it doesn't as of recent. I have used both. Don't know if immobilizer could be it either.)
View 3 Replies
I was driving and went to shift from 5th to 6th and when in 6th the engine just revved freely as if it was in neutral. When I tried to get back into 5th it did the same thing. It's also very hard to get into 1st.
I want to try the alignment but I can't find one specifically for the stock 6 speed and I don't have my Bentley DVD on me.
View 15 Replies
Just did a brake job on my IS-F. Everything went smoothly for 50 miles, then as I'm pulling into the driveway I hear a horrible grinding from the front.
Disassembled everything this morning and it looks like the pads are in constant contact with the rotor. Is there a set screw I missed? When I did the brake job, I retracted the pistons slightly with a C-clamp, and did not bleed the brakes. What am I missing?
View 6 Replies
I've got a 2009 Azera with 58k. When I'm backing out of the driveway, I start to hear a low squeaking noise right as I'm turning the wheel. It happens right before I get a squeak I recognize as the breaks, so I know it is not that. It only happens when the engine is cold and typically the first or second time I try to turn at low speeds when I'm driving the car. I've had it also happen when I'm pulling out of a parking space at the garage at work.
View 2 Replies
I have an early production 2008 2.0T 6MT. The car has just over 2000 miles on the clock. I noticed that early in the morning, when it's cold, pulling out of my driveway, I hear a clunk from the front end. It doesn't always happen. Also, on the highway, the car feels like it wanders left and right, certainly more than my old B5.5 did, and in general it pulls to the left and the steering wheel sits slightly to the right. I found the following TSB on this site: [URL] .... My question is, this TSB doesn't mention anywhere that an alignment should be performed as part of the service. Should that be done? I'm going to take it to the dealer tomorrow.
View 4 Replies
One day i was driving my pedal went flat to the floor ,then i noticed my brake fluid was low so then i tried adding more fluid and bleeding it n pumping the clutch i got pressure back, but now i hear chatter in the tranny and it wasn't doing that till after I bleed it. It will go into gear with the car off but as soon as the car starts in wont at all.
View 12 Replies
Today I went to start my car and let it warm up and everything worked fine and it started regularly but when I went to go drive the car and put the clutch in the pedal didn't return and I could not put it into gear, need to identify the problem.
View 4 Replies
Yesterday I went to shift from 2nd to 3rd real easy going like 25mph and i couldn't shift out of second. I could wiggle the shifter up and down but barely side to side. Even when moving it up and down it didn't feel like it was engaged in any gear although it was apparent I was stuck in second. Clutch feels normal and still grabs well.
So after driving only in second all the way to my uncles shop I sit at school waiting to see where i can pour more money into the GTI. Its a 20th ae totally stock tranny, I don't know a whole lot about transmissions but possibly the linkage got messed up? I didnt hit any big bumps or anything before it happened.
View 5 Replies
So far its only happened twice in the past to days, and its only happened in 1st gear. when i give it gas to go in 1st gear the EPC light will come on and it sounds like a miss fire or something. then the car basically shuts down.
View 24 Replies
Well, driving down the road just like any other day. I go from 1st to 2nd gear. It feels like I missed a shift, no big deal decide to put it in 3rd. Missed 3rd gear...... weird, no big deal through it in 4th and was on my way. Got to a red light, no 1st or 2nd gear. Where 1st and 2nd gear are, it feels like there is nothing there when i tried to shift into gear. If I go into 3rd gear its now 1st gear, 4th gear is 2nd gear.Had a mechanic look at my car, and the linkage and clutch are fine. He feels that something minor broke inside the transmission.
A) What do you think might be broken?
B) How could this happen?
Driving my car like a baby, I am never hard on my clutch. No pre-warning, no bad sounds, and I have never had an issue with my transmission before. I am hoping I do not have to pull my transmission out but it looks like I may not have a choice...
View 19 Replies
