GTI 337/20th Anniversary :: Bolt Pattern For The Rims?
Jun 15, 2009
what is the bolt pattern for the rims of a gti 20th anniversary??
View 1 Replieswhat is the bolt pattern for the rims of a gti 20th anniversary??
View 1 RepliesWhat is the mk4 standard locking lug bolt? IIRC it was like a 16 point.
View 1 RepliesWhat bolt pattern the wheels are on my 99 passat. Fairly new to the game. and can I put on the audi phat fives or the S4 wheels also what problems are run into when you put on 17's. does it mess up the on board computer that computes mpg and all that good stuff?
View 4 RepliesI am installing my coilovers on my gli and I have everything installed but the passenger side coilover. I cant even remove the old strut because the damn lower strut mounting bolt is seized and I've been trying for hours to remove it at no avail. I have used pb blaster, my heat gun, and my sweat. I dont have impact tools, just my ratchet..
View 15 RepliesI have a 79 f100 that I am putting 96' explorer seats in. Got the tracks all made, decided to have the seats re done as a cat pissed on them.
went to talk to the guy doing the seats today and he can get new foam and won't make new foam. So my question which seats whether it be from an F series or E series has the same bolt pattern as the 96' style seats. so I don't have to make new brackets. Will the fox body mustang seats work as well?
I have a 2007 Mercury Mariner with a 3.0 Liter V6 engine AWD. The transmission is giving me a problem. No shift into 2nd and 4th. Solenoid or band broken I think. Is the bolt hole pattern to attach the tranny to the engine different between the 3.0 V6 and the 2.3 I4?
View 3 RepliesNeed to know if the 5.4 and 6.8 use the same bell housing pattern?
View 5 RepliesI purchased a used 2003 Echo last week. The all season tires are on 15 inch rims. I would like to buy snow tires for this car. The question is - snow tires on 15 in rims or snow tires on 14 in rims? I understand that 15 inch rims was an option selected on the original purchase. Without this option, the car would have had 14 inch rims.
View 14 RepliesI want a 20th AE & have seen pics that say ESP on a button next to the hazard & others say ASR. I know that their was one option for the car: ESP. So what's ASR? Is one better than the other? Is it the same? I've heard that the ESP sucks for autocross. Is this true?
View 8 RepliesI was driving at about 60mph in 4th gear and knocked it into 2nd and the rpm's hit the max and the car shut off and I have not been able to get it started. I have compression, fuel, and spark . I've checked oil and don't have any coolant in and nor did I have any oil in my coolant. When I try to start it it try's to start but won't turn over so .
View 12 RepliesDriving home from work, I was about 5 minutes from home, got to a light only to not be able to go into 1st. I popped it into 2nd and drove home like that pretty much. Car will let me get into reverse and all other gears.
I can put the shifter towards first but it doesn't fully go in and when I gave it gas it would let me start to creep and then grind a little and pop out.
Heres a pic for your click .....
I was searching but I can't find any DYI's on turning your Daytime Running Lights off on our cars. I don't feel like buying a euro switch right now. How to do this or has done this to their vw's?
View 24 RepliesI was following the directions on the APR site to remove the ECU and it seems to not make sense. Saying the ECU is on the passenger side underneath the molding....
is the ECU in the center?
I've had the leak for a long time now possibly from when I've gotten it... anyway when I first bought it I drove it a lot, like 8k miles in 6 months. During that time I went through a qt of oil about every week and a half. Now the last 3 months I've been barely driving it due to life changes so I'm barely putting oil in I'll go weeks sometimes of checking the level and it'll be fine. This leak has to relate with how often its driven and maybe hot?
I've had the car up multiple times to try and find the spot all I know is it's behind the engine below the valve cover gasket and above or near the turbo area(I've only owned my first VW this 20th for less then a yr so I'm still learning)
I get up to go to work today and the car runs fine, a few hours later i get back in, try to put it in reverse, and nothing.. it wont let me shift in after i push it down. So i push it back in neutral and drive away.. every gear works fine, when i got home i took off the boot, tried to see if anything was loose, shake it a few times and out of nowhere first and second give. They were working perfectly 5 min before, and now they just feel really loose, but every other gear works fine, so now I have no reverse, 1st or 2nd. Did I just knock something out of alignment or is the problem a lot worse.
View 3 RepliesI recently took out my headliner And my passenger's side seat. When I put everything back together, I turned the car on and the light came on. What can be the issue?
View 10 RepliesAfter I got gas yesterday I drove about 10miles and the CEL light came on. The gas cap seemed a little loose so I am assuming it is that until I get it scanned soon. I was just wondering how long is stayed on if it wasn't cleared, I know some cars take a few days.
Does euroswitch installed have a problem with the audible headlights-are-still-on tone? If I leave my lights on, and exit the car no sound will sound. If I open it back up, then it will make a sound. Pretty useless.
Also, still looking on the best length for the Thule wind fairing for stock votex racks?
So I just changed the valve cover fast but I am still getting oil onto the hood of my car. It did this before I changed the gasket as well. Is my valve cover bent maybe?
View 7 RepliesOk first lemme start I have a 20th with 76,000 miles chipped. I was driving down my street and the car julted a little, didn't think it was much, kept driving the check engine light turned on and the engine sounded like it was hesitating and I lost alot of power. Also it sounds like a Subaru. I haven't yet changed my coils so I'm thinking that's what it is.
View 3 Repliesso my check engine light came on recently and i took my car to a local shop to get it checked out and they told me one of my o2 sensors might be bad and that i should replace it. but because the catalytic converter that i have installed is an aftermarket one(installed before i bought the car used), they told me they were unable to remove the sensor attached because it was welded(?) on or something to that effect and they didnt have the tools to fix it.
so i did some research and found a better shop that deals with catalytic converters and exhaust systems and im thinking of taking my car there to see what they can do BUT, i was just researching online and ive found other posts saying that it may not even be a bad o2 sensor, it could be a different problem but the its just the bad o2 sensor code that comes up and now i dont know what to do.
just wanted to see what everyones opinion is on this subject or if they have gone through this before!
I am trying to put a exhaust cut out on my car, I am trying to put it right before the cat. Looking for pics?
View 15 Replies