I have a 337 running the ATP gt2x kit with revo stg3 and external fuel w/550cc injectors. The car has power in the first three gears until 4200 RPM then it acts like it backfires and then looses all power, but it will drive and boost normal in 4th,5th, and 6th gear. I have basic boost settings running on the revo and cant figure out what the problem is.
View 7 RepliesThe problem i got is that when i step on the car it have a lot of power in the first 4500rpm but after that it looses all it's torque. it's really weird. I got the car scanned and the scanner found a problem with the cat converter, but something tell me that's not it. The check engine light is on.
View 16 RepliesI have a 2004 gli and there r no lights an no codes but when I am driving the car shakes a little almost if the motor was bogging down a little. its nothing to major just a slight back and forth movement. I cant seem to figure out the problem it seems to go away during acceleration. Also one other thing is it seems to do it worse when its warmer!
View 1 RepliesI have had this happen three times in the last two months. I was not hard accelerating, just cruising on the fwy at about 70mph in sixth all three times. Then for no reason, my rpms drop, no check eng light, no power for about 10secs and then, back to normal. I have had the codes checked twice, nothing recorded...
2004.5 gli .... 65k
Driving home from work, I was about 5 minutes from home, got to a light only to not be able to go into 1st. I popped it into 2nd and drove home like that pretty much. Car will let me get into reverse and all other gears.
I can put the shifter towards first but it doesn't fully go in and when I gave it gas it would let me start to creep and then grind a little and pop out.
Heres a pic for your click .....
I have a problem with my 20th anniversary gti. My 1st and 2nd gear won't work. Every other gear works fine, the gears never grind before or any unusually noise. I was pulling off my driveway and they just stop working. Even when the car it's on I can move my shifter to 1st and 2nd without the clutch and nothing happens.
View 3 RepliesSo I get in the car to move my car this morning and I can't get the car into 1st gear. It turns out I can't get the car into reverse, 1st gear, or even 3rd gear. It feels like something is blocking me from even approaching those gears, however the others (2,4,5,&6) seem to be fine.
View 14 RepliesI bought a rebuilt trans from a fellow vortex member a little over a month ago. I had it installed and ever since then when I am getting on it going from second to third it grinds a little bit going into third gear. It only does this when i get on it, but when im just cruising its fine. Could the shift linkage just need aligned? Or what else could it be?
View 5 RepliesAs of two days ago my car ust refused to go into 1st gear. I know that it is a common occurrence with the 02j and shift fork, but 2nd works perfectly, so how could it be that shift fork?
View 16 RepliesSo I've been noticing that my GLi is tough to put into first gear sometimes. I feel almost like I have to jam it in place and hold it there, it doesn't just click in. Could this be the shifter cable ends or the cables themselves? Its weird... its only ever been a problem for 1st gear though.
View 15 RepliesI was driving home and noticed that it seemed harder to shove the gear shift into 1st gear. I stopped on the way home and discovered that I couldn't put the car into reverse, when I tried, and then started to drop the clutch and go in reverse, it was as if the car was locked into both reverse and a forward gear, the engine would bog and the car wouldn't budge.
I popped the hood and checked the shift rods and they looked OK, no obstructions or broken parts. I played with the gears for a bit and finally reverse gear suddenly started working again, but now 1st and 2nd gear are gone! it does not feel as if it's engaging the gears at all, the lever moves free. No different than having it in neutral. 3rd gear and above all still work OK, so I had to use 3rd gear to get the car moving.
I had my first and second gear go out on my gti over a month ago, it sat at my house for a little over 2 weeks. When I finally was able to take it to the transmission shop it needed a jump. A week later my transmission was rebuilt and clutch replaced. Car needed a jump when leaving the shop too.
I took it home and a bit later tried to go somewhere and... nothing. Completely dead, won't charge or be jumped. Sunroof was half open and windows cracked. Rained that night so I had a make-shift cover with trash bags and a container top. (I don't know if this matters but just in case it may be water related.)
The next day I got a new battery and changed it. Car worked fine for 2 days. This morning I tried to start it and it fluttered and battery completely shut off. Jumped it and tried to take it around the block after few and it shut off mid drive, but was able to restart while rolling. Then when I pulled over and hit the four ways it immediately shut everything off again. I had someone come with cables so I could just get it home, and as soon as I connected the red cable to + it sparked and the lights and everything turned on, started right up. (the jumper cables were not connected to anything on the other side)
Finally I got it back home and when I pulled into the driveway and stopped I hit the window buttons and boom, everything off again.
Confusing story, but what could be wrong? I included everything just in case. (I have 2 keys, one which keyless entry works and one which it doesn't as of recent. I have used both. Don't know if immobilizer could be it either.)
I was driving and went to shift from 5th to 6th and when in 6th the engine just revved freely as if it was in neutral. When I tried to get back into 5th it did the same thing. It's also very hard to get into 1st.
I want to try the alignment but I can't find one specifically for the stock 6 speed and I don't have my Bentley DVD on me.
One day i was driving my pedal went flat to the floor ,then i noticed my brake fluid was low so then i tried adding more fluid and bleeding it n pumping the clutch i got pressure back, but now i hear chatter in the tranny and it wasn't doing that till after I bleed it. It will go into gear with the car off but as soon as the car starts in wont at all.
View 12 RepliesToday I went to start my car and let it warm up and everything worked fine and it started regularly but when I went to go drive the car and put the clutch in the pedal didn't return and I could not put it into gear, need to identify the problem.
View 4 RepliesYesterday I went to shift from 2nd to 3rd real easy going like 25mph and i couldn't shift out of second. I could wiggle the shifter up and down but barely side to side. Even when moving it up and down it didn't feel like it was engaged in any gear although it was apparent I was stuck in second. Clutch feels normal and still grabs well.
So after driving only in second all the way to my uncles shop I sit at school waiting to see where i can pour more money into the GTI. Its a 20th ae totally stock tranny, I don't know a whole lot about transmissions but possibly the linkage got messed up? I didnt hit any big bumps or anything before it happened.
So far its only happened twice in the past to days, and its only happened in 1st gear. when i give it gas to go in 1st gear the EPC light will come on and it sounds like a miss fire or something. then the car basically shuts down.
View 24 RepliesWell, driving down the road just like any other day. I go from 1st to 2nd gear. It feels like I missed a shift, no big deal decide to put it in 3rd. Missed 3rd gear...... weird, no big deal through it in 4th and was on my way. Got to a red light, no 1st or 2nd gear. Where 1st and 2nd gear are, it feels like there is nothing there when i tried to shift into gear. If I go into 3rd gear its now 1st gear, 4th gear is 2nd gear.Had a mechanic look at my car, and the linkage and clutch are fine. He feels that something minor broke inside the transmission.
A) What do you think might be broken?
B) How could this happen?
Driving my car like a baby, I am never hard on my clutch. No pre-warning, no bad sounds, and I have never had an issue with my transmission before. I am hoping I do not have to pull my transmission out but it looks like I may not have a choice...
My wife was driving home and was exiting the freeway, downshifted and then no response from the clutch or gearbox. It would move left to right but not go into any gear with the car on. No real pressure in the clutch pedal either. With the car off you are able to find all the gears but when you start the car in gear with the clutch down it just jumps forward and dies. No smoke or burning smells either way and the pedal does come up by itself. Pushed the car into the driveway and its goin to the shop tomorrow morning.
With the search button so far: master/ slave cylinder, full clutch problem, air in brake/clutch lines, shifter linkage bracket
I don't think it's the slave cylinder as the pedal is NOT stuck to the floor, but I am not handy with cars, only motorcycles. First thing I checked was the linkage bracket, which seemed to be fine and as I stated, I was able to get in gear while car was off. Brake fluid was almost full but i know that doesnt rule out air in the lines.
If the car is moving, the transmission feels like it doesn't want to let you shift into first (even with the clutch all the way in) until you've slowed down considerably. it grinds if the clutch is all the way in and i try to put it into 1st at about 30 mph, for example.
I always thought that it was probably a safety feature so you don't try to get into such a steep gear at that speed. i guess I'm just trying to make sure of that, because I've never researched it before. What I'm starting to notice now (or maybe its in my head) is that the trans is being real particular about me having the clutch pushed in all the way _to the floor_, something that it something that it tends to give me a bit more slack with the other gears.
For example shifting 2nd to 3rd, i can usually have the clutch pedal about an inch off the floor and it will still shift. is this a sign of clutch wear? it's got over 100K miles on it of mostly granny shifting.
it all started out like this. i was unable to go into reverse took it to a shop when first and second were good. Came out of the shop after inspection and now i can shift into first or second gear but not the rest, its stuck in those two and they do not work. do i need a new trans or is it a shift fork and or linkage?
View 11 Replies