GTI 337/20th Anniversary :: All Gears Not Engaging?
Oct 27, 2008
I was driving my car to a local GTG the other night and about 3/4 the way there i went to go put it first and it wouldn't go into any gear .... I summed it up to being either the tranny the clutch or the linkage....
My only clue is that i can rotate the shift knob in a circular motion.... the clutch petal still feels normal ... and under the hood when you try to move the linkage manually into gear the side to side part hits the motor mount (metal to metal)....
View 14 Replies
Advertisement
So I have a 2005 gli here is what's going on. The ac compressor is not engaging, the reticulation button is not lighting up when pressed in, the cruise control is not coming on and the daytime running lights are not turning off when the hand brake is engaged. And the radiator cooling fans to not spin when the engine is first started. I have checked all the fuses inside and over the battery. I have checked the relays ( they click when hooked up to power). I'm suspecting a bad fan control module. I've done some searching and that's the only thing I have found that would control the fans and the ac.
View 2 Replies
Purchased my first VW. I bought a 2003 IY 20th AE with 83k mi.
Two days ago, i'm picking up a friend at their house and as i go to take off from a complete stop- 1st gear revs up as if the car were in neutral, same thing with 2nd gear. 3rd-6th work normally and so does reverse. I called the dealership and they guy says that since the car was bought 'As Is' he can do nothing for me, but try and get me his price on the repair (which i think is complete BS).
I've had a couple people try and tell me a few things that could be causing the problem, like throw out bearing, or maybe the shift fork. i would say that i know a little bit about cars, but i've mainly worked on honda's or other japanese cars so i feel a little lost under the hood of a vw still.
View 6 Replies
So ive had the car for a couple months now, daily driver. Fixed a couple minor things here and there. I bought a K&N drop in filter the other day took it for a spin and when i was shifting from 1st to 2nd my second gear seemed empty. nothing. didnt grind or feel rough at all. just didnt have a gear. then i tried 1st and same result. before this my car was running great clutch felt strong and i was having alot of fun with my car. I even tried resetting my linkage and checked the cables inside and by the tranny.
1st and 2nd are gone
View 3 Replies
I got a 337 and not sure if the trans is going or not. it shifts all gears but the first 3 are sketchy and sometimes they're hard to get into gear. it feels like I am hitting something in the way when i shift but other times its smooth like butter. I do have some shaft play. never pops out of gear either. could it be the linkage? the shift fork? slave cylinder?
View 5 Replies
For some reason My car won't boost like it used to in the upper gears. 1st, 2nd and even 3rd I can still boost around 18 but once I go 4th, 5th, 6th my boost get lower and lower to the point the I get only 10psi in 6th gear. The car also seems slower a doesn't spool that fast like it used. i checked most of the hoses, even my intercooler pipes which were leaking before and everything is tight. Could it be my DV which is still stock or should I look someplace else?
View 13 Replies
was diriving my toy1and was shifting from 3rd to 4th when the rpm reved up and the car would not take any gears to drive foword or revers my gears when you shift are engagging but no mvement also i dont have to push the clutch in to shift it will go with out clutching.
View 9 Replies
First off i couldn't get the car into reverse to back out of a convenience store and then i let off the clutch to try and pump it again and the car just dies. drove just fine up until i parked. Now when i try to move through gears it sounds like it's shifting but the car doesn't move. The car does have a stronger clutch and unitronic chip if that would have to do with anything.
View 13 Replies
I am hearing a rumbling noise when I hit 4000 rpms on all gears worst in 2nd and 3rd.... I just recently replaced the timing belt, TBA Done, valve cover gasket, and passenger side axle (through raxles). Anyways I started hearing noise after those repairs, my mechanic has gone through all the work recently done and cant find the problem..... We replaced the tranny mount thinking it was that, but no luck.... I have not lost boost, and noise starts 4000k and goes away at 4700k No codes are flashing.
View 5 Replies
sometimes when i switch from 1st to 2nd or 2nd to 3rd i get a loud popping noise like my exhaust is hitting the under side of the center column. I have had the car on a lift and shook the hell out of the exhaust...it's not moving enough to cause that loud popping...so i figured it could possibly be the dogbone mount gone and the downpipe is hitting when i shift because the mount is bad?
Or could it be one of the other mounts...I'm going through a divorce right now and really really broke so i need to make sure i get the right one and fix it right the first time. What mount it is if not positive its the dogbone?
View 4 Replies
I have 20th gti and I downshifted into third the other day and heard a small grind and all of the sudden I lost all my gears, I couldn't shift into anything and was stuck in third. I was able to move the shifter up and down from 3rd neut to fourth without engaging the clutch but it was all the same gear:S I managed to get home in third considering I was close by and when I stopped i was able to throw it into reverse but it would act like i was in a high gear(either 4th 5th or 6th I am not sure).
View 4 Replies
I took my car to a shop today to have some engine stuff checked out. One of the mechanics noticed the vacuum levels would drop to 28-30 hg when changing gears or going into neutral. Is this normal?
View 2 Replies
So while I was in gear i felt a thunk and suddenly the car had no driving power in any of the gears including reverse. Pulled over popped the hood and checked my linkage. Everything was still connected as far as i could tell. Had my buddy watch the linkage while i shifted through the gears, everything checked out normal. While in gear the car still rolls so obviously something internally isn't jivin. Haven't gotten under it yet, doubt that will tell me anything. 130k miles had her for less than a year haven't gotten around to picking up a bentleys yet. I'll grab one tomorrow since nothings open today.
View 5 Replies
Been having trouble shifting into any gears on these chilly mornings in VA now... The clutch has been sticking on its way out when I release it and the gears don't want to engage unless I really push hard on the shift knob.
View 11 Replies
My transmission had no slipping was running fine . Oil level was ok , recently added 1/2 quart , cause it has some small leaks. I go to drive away other day and none of the drive gears or reverse would engage. Mechanic thinks transmission locked up . Kind of hard to condemn my old baby considering it was running fine .
Would the TCC solenoid do this or the ECU ? I recently reinstalled the bar going to starter that was disconnected for 5+ years because i was having slow crank issues. This transmission problem occurred 2 days later. I am thinking it might have made the ECU unit go bad , since the starter had not a good ground for so long ?
View 14 Replies
Ok, the swap is all done and I have an engine in the truck that has compression in more than (7) cylinders.
2002, 7.3, 4wd - ~120k miles on trans. Fresh fluid (Mercon V).
Put the gear selector in reverse and it goes right into gear with the normal tug and functions as it should. Put it in low gear and it also appears to work fine. But, when selecting '2' or 'drive' it feels almost like its engaging 2 gears at once?? There is limited forward motion and it feels like the brakes are on. I have not driven further than the driveway yet, but I have a long driveway...
The OD light does not come on. I am not getting any codes from AE, but I really don't know how to use it for transmission stuff (I've been using a different scan tool that I no longer have).
We have not put the bed on the truck, so no tail lights - but 3rd brake light has new bulbs and was working (didn't check this AM though... )
I have a couple other codes, CEL, 'check gauges' and no tach. Gonna start another thread for those issues, I'll put a link here in case its related.
View 14 Replies
I want a 20th AE & have seen pics that say ESP on a button next to the hazard & others say ASR. I know that their was one option for the car: ESP. So what's ASR? Is one better than the other? Is it the same? I've heard that the ESP sucks for autocross. Is this true?
View 8 Replies
I was driving at about 60mph in 4th gear and knocked it into 2nd and the rpm's hit the max and the car shut off and I have not been able to get it started. I have compression, fuel, and spark . I've checked oil and don't have any coolant in and nor did I have any oil in my coolant. When I try to start it it try's to start but won't turn over so .
View 12 Replies
Driving home from work, I was about 5 minutes from home, got to a light only to not be able to go into 1st. I popped it into 2nd and drove home like that pretty much. Car will let me get into reverse and all other gears.
I can put the shifter towards first but it doesn't fully go in and when I gave it gas it would let me start to creep and then grind a little and pop out.
Heres a pic for your click .....
View 24 Replies
I was searching but I can't find any DYI's on turning your Daytime Running Lights off on our cars. I don't feel like buying a euro switch right now. How to do this or has done this to their vw's?
View 24 Replies
I was following the directions on the APR site to remove the ECU and it seems to not make sense. Saying the ECU is on the passenger side underneath the molding....
is the ECU in the center?
View 1 Replies
