Ford Wiring/Electrical :: 2004 - Passenger Power Window Won't Work?
Apr 14, 2015
I have a 04 explorer I have been trouble shooting and the master switch works all but the passenger window wont work it at all but all the others work fine, its not the switches replaced both, the passenger window switch will roll the window down but not back up. I checked for power there is power to the switch in the passenger side, the ground is good. I can pull the plug off the motor and hook a jumper ground up and the switch will make it go back up. I have been working in body shops for 40 years and now this is the first one to stump me
View 7 Replies
Advertisement
I have a 2003 f250 ext cab LB 6.0l diesel with 260,500 miles. So last week I had rolled both front windows down and hit the road to work 45min trip and so I got a call and rolled them up to talk after the call was over I rolled them down. So when I got to work I rolled them up and at night I try to roll them both down to let out the heat and only my driver side went down so I hit the pass.side switch nothing I hit the driver side for the pass. And the light in the switch for the window on the pass side door went out.and didn't go down.
So now I tried up and you can hear the motor trying to go up but only if you use the pass.side switch the driver side does nothing up..... So I replaced both switches as I though rain and snow and dirt got into them and killed them nothing changed I checked for power to the motor and it has 12.2v on the up and when it switches wires to spin the motor to go down I only get 4-6v on both wires. So I checked the door jams for broken wires nothing and I can use my power prob to roll the window up and down so I think the motor is ok on the window..
View 1 Replies
Headlights work, done and door lights also work. Radio, door locks, and window controls do not. Car will no longer start and it doesn't seem to be the battery or starter, but I may be mistaken.
View 2 Replies
I have a 2002 F250 7.3 PSD and the drivers side power window will not go up. How do I troubleshhot it. Is it the switch, motor, fuse? The other three windows work fine.
View 2 Replies
I recenty was having some problems with my 2003 6.0 liter. My FICM connection was not seated all of the way which casued my truck to just die without warning....... AFter I had fixed that, my stereo died. Just dead??? Nothing...EVERYTHING ELSE WORKS???
So, after I had messed with everything I could think of, I thought, OK new DVD/Stereo time.
I checked fuse #32 which was the fuse to my stereo. The fuse is fine...BUT...There's no friggen power to the fuse via my test light. Test light works on other fuse spots so I know i"m not getting power to the fuse #32.
Since I don't have any power to this fuse....WHAT NOW???? How to trouble shoot this problem?
View 7 Replies
I just bought a used 1999 F-150 Supercab (V6) less than a month ago. As used, of course, I received no warranty of any kind. Yesterday, I found I could no longer roll down the driver's side power window. Whenever I push the button, it makes a clicking sound in the fuse box. The problem is, the fuse for the power windows covers both driver and passenger sides, but the passenger side works fine.
I did notice that there is a black plug called a Relay that affects the Auto Down power window feature. Since the driver's side is the only window with Auto Down, I'm hoping maybe that relay just needs replaced, and everything will magically work again??? I'm NOT a car/truck nut - I don't even know how to change my own oil.
I recently had a power window motor on my 1995 Thunderbird replaced. I'm hoping I don't have to do that already, just a month in to my F-150. But on my T-Bird, there was no clicking in the fuse box when I tried to window.
View 9 Replies
I have a 1993 F150 that I have been working on. I have a set of complete doors off of a 1989 with Power Windows and locks hung on the truck and need to figure out how to power them up. Looking for access to a wiring diagram that will identify the colors of the wires in the doors. I don't care about the auto down and all of that ... not going to try and convert the whole truck with comp and all ... just want to make these function.
View 14 Replies
I am having issues with my auxiliary relay on my truck. It will work intermittently. It started with me just needing to give the relay a light tap for it to work, and is now progressed to needing me to push really hard on the relay for it to turn on, but then as soon as I let go it shuts off again. I have replaced the relay with a new one and it's doing the same thing, and have even tried some di-electric silicone on the terminals with no success.
I was thinking of pulling out the entire fuse/relay panel and see if the contacts have pushed out, but then I read a thread regarding the panels and issues involving the removal the terminals and breaking the panel. 2004 F350 CCSB 6.0L...
View 14 Replies
2004. Hazards and brake lights work.
View 6 Replies
I have a 2004 explorer and the only window that will work is the front passenger. Is there a relay that controls this?
View 11 Replies
I don't know if this goes here but I ha a ford f350 king ranch 2006 I got it 5 months ago the fog lights never did work. One of them was burnt out.
I replaced them both today and checked the fuse and they do not come on. I checked the fuse under the dash kick box. What else could be going on here hat I can look into?
View 14 Replies
I've got an 06 F-250 and out of nowhere the drivers side window does not operate. I don't hear the motor operating (or trying to operate.) So I opened the trim piece and removed and reinserted the plug for the two forward switches, no change.
Surprisingly we are expecting more rain in So Cal in the middle of April tonight and I'm wondering how to by pass the switch, to at least get the window in the up position to keep the weather and the natives out.
View 7 Replies
03 F250 Instrument panel does not work. Have checked all fuses with a meter. Have already fixed broken wires from the OD button on shifter handle. and also the alternator is not charging. I need wiring diagram that shows the wires coming out the back of the fuse box so I can see if the fuse holder is burned out......
View 8 Replies
I recently bought a 92 F250 and love it but the blinkers will not work. I have replaced both flashers and the multifunction switch. (the wipers had issues too that were fixed by the switch...) Now what? Im at a loss..
View 7 Replies
My work truck is an 03 F250 5.3L. My flashers recently stopped working. I turn them on, and they will work anywhere from 5 seconds to a few minutes, then either blink rapidly and shut off, stay solid for a few seconds and shut off, or just shut off. I push the switch off and on again, and the cycle repeats. All my other lights and turn signals work fine with no issues.
This wouldn't be a huge issue, but where I work I need the flashers a lot. The truck has a bar light and siren/pa system wired into it, but not to the lights or anywhere near that. I can't say exactly how it's wired because I didn't install it, but I followed the wires and they don't go under the steering wheel where I would assume the relay and wires for flashers would be.
What sounds like is wrong? I wouldn't think it would be the relay because then I would think that I would be having problems with more than just the flashers. So I'm not sure if there would just be a ground issue or if it's the actual switch that turns on the hazards. Also, there are no lights that are burnt out.
View 6 Replies
so I recently purchased a 2007 f350 SCSB and my reverse lights don't work. I am trying to trouble shoot the cause... So far I've replaced the bulbs and tested the plugs and im not receiving any power to them... Where to start to look for the problem?
View 3 Replies
Looking for a source for a wiring diagram for the 2003/4 f350 instrument cluster, specifically the wiring/connectors to the gauges? A link to a PDF file would be nice. I would like to try and disconnect the PCM control to the transmission temperature and engine temperature and drive the gauges from my own sensors to bypass the non-linear behavior that ford decided was in our best interest. I am NOT interested in installing any more gauges, just want to control the ones already present with my own signals. It is possible that these gauges are all addressable devices on a common bus, instead of individual controls.
View 8 Replies
Im installing a set of 04 lariat seats into a 00 truck. I need to know how to hook up the heat. The power part is no problem. What I thought was right which was a separate constant 12v and a switched 12v for the module and ground apparently isnt right. If somebody could ohm out their harness on a 01 truck that would be great. As I have it right now the light on the switch comes on but almost instantly turns off.
View 14 Replies
I'm trying to find the wiring diagram for the power windows in a 96 f150. I've got a set of these that i need to fab a harnes for to install in my 82.
View 12 Replies
My turn signals will not work with the engine running. With the engine off they will. With the engine running if I move the ignition like I am going to turn it off they work.. Is it the ignition switch or ign cylinder....
View 5 Replies
I am beginning to think that I need a whole forum dedicated to my trucks wiring issues ... I finally got my reverse lights to work but my newest issue Is that while driving tonight i lost power to my parking lights, my instrument cluster lights, and my heat control lights... everything still works inside (gauges all act properly but they won't light up) and i still have turn signals and brake lights, and headlights. I really don't know where to start with this one. I don't have an owners manual so i can't figure out what fuses to check or what relays to look at. It is a 2007 f350 diesel....
View 9 Replies
