I'm wondering what transmission fluid is the best to use for my 73' f100? Also wondering if changing the Fluid would stop the tranny from slipping. When i start her up reverse works great pops in every time quickly, but when i go into drive nothing happens like its in neutral?? after awhile of sitting and pressing on the gas a few times it pops in gear but very slowly and in stages.
View 1 RepliesI came across this site that seems to implicate very common issues with failures in gen 2 : Transmission Slipping ! | Hybrid Cars
With people experiencing lack of power and "slipping" sensation or tranny going from drive to neutral.
I thought there were common issues with gen 1 motors burning up inside transaxle, but I thought gen 2 was much improved with only rare failures. Yes, I did read both sticky threads giving very detailed accounts how to replace them.
I drive a 1998 Ford Contour, the transmission goes into neutral on takeoff in drive, you can manually shift through the gears and get going, but not from drive.
View 1 RepliesSo I drive a 79' f-150 and my truck when I take left turns, start on a steeper incline or give it too much gas my automatic transmission tries to jump from drive to neutral. This only happens initially; if I'm on the free way and at a higher rate of speed it doesn't do this but it seems like when I give it any more than a little gas it tries to jump into neutral (it has once) it doesn't or hasn't really done this on right turns I don't know if that makes sense or not.
Why it may be doing this and if so what I might be able to do about it? I do have a book for my truck and I have done some small things but I don't really know a whole lot.
I've got a 2006 F250 6.0 5R110W 4wd 220,000 miles It started getting a slight delay going into reverse and tow light flashing last week. all else functioning perfect Got a pending code P0700 and P0741 I stopped at NAPA when I was leaving no reverse checked every thing all was normal no leaks and fluid good color drove perfect in drive I got back to the shop [10 miles] put truck in park it was like its still in drive same with neutral, in reverse it wants to creep forward.
View 1 RepliesMy 2011 Hatchback automatic has developed a whine in park, neutral and drive. ATF fluid level ok and changed by dealer every 25,000 miles. Seems to be coming from under the car. Could it be the transmission oil pump? If so, does it mean removing transmission to replace? I don't think it's the fuel pump. 62,000 miles.
View 5 RepliesEco Transmission. Neutral at stop lights save gas compared to Drive?
I almost feel like when I'm stopped in Drive it's actually in neutral. I'm curious if being in Neutral at really long red lights would save gas?
I have a 1990 F250 with a 7.5 liter and an E4OD. It starting acting up a couple months ago. Tranny would seemingly go into neutral while on freeway. I figured trans was going out... After reading several threads I've decided to try changing the mlps first, got a new one at the dealer!!!. It is the updated one with the connector on the top. I'm currently waiting on a new pigtail from autozone (the original is in bad shape, wires frayed, insulation missing. Also I think when it started having issues we were having some serious rains, which may have caused this connect to get wet.
I believe a previous owner may have had the trans rebuilt at some point. The connect has 6 wires going in it and when I trace those wires back, two are spliced into one farther up the harness a bit. Looks like one is tied into a wire that goes to the solenoid harness. I'm hoping I can cut and splice the 6 wires into the new pigtail and be good.
For now, while I was under there I decided to pull the solenoid plug as instructed to make access to mlps plug easier... the lock is on the backside almost impossible to get to, I messed the plug up all the way around, but not fubarred. When I pulled the plug out, it was soaked in transmission fluid... Is that normal?
Is it bad shifting from drive to neutral then back to drive going 40mph without pressing on the gas only coasting on a daily bases?
2008 Sonata GLS ... Automatic transmission ...
2001 T&C with 3.3, 4speed tranny and 128K miles.
Here's an interesting one: This morning I went went to get gas and no problems getting to the gas station. I pull out of the gas station and get to the first light, again no problem. Light turns green, I go and the tranny shifts from 1st to..... nothing! Just like I slipped it into neutral. I coasted into a parking lot, moved the gear selector from Park to R to D to L, and nothing.
I put it in Park and shut off the engine, then restart and shift into drive and it goes into gear! I start to drive away and when it's time to shift, it goes from 1st to.... nothing again! Once again none of the gears work, until I shut the engine off and restart.
After I restarted the engine I shifted to L and drove home in 1st gear keeping an eye on the tach so I wouldn't exceed 3500 RPM. Got home with no problem.
So, to recap, when it goes to shift up from 1st it goes into nothing. Just like neutral. No check engine light, not "limp mode". If I shut off the engine and restart, it'll go into 1st, and if I keep it in L so it won't try to shift up, it'll drive all the way home in 1st. Reverse doesn't work no matter what I try.
Some background: I changed the tranny fluid and filter 2 years ago at around 90K. fluid level is good. It did rain hard last night, conicidence? The engine compartment is dry.
I think it is safe to rule out a mechanical problem, this seems to be electrical and we can probably rule out the tranny range sensor since it keeps it in 1st when I have it in L and the backup lights come on when I put it in R.
1993 Geo Prizm with some odd 275,000 miles on it. Was at a stop sign, in first gear, and gave the car some gas. Very quickly it jumped out of first gear and stopped moving abruptly. Tried to get it back in first gear and it just stayed in neutral. Had to push it to the side of the road. Tried putting it in any gear and it wouldn't go. Then tried to have the car running in neutral and let up on the clutch and as soon as I started letting up on the clutch, something (like metal) started grinding. Pushing the clutch it (in neutral) stops the grinding. So, do I need a new clutch? New transmission?
View 11 RepliesI have a Suzuki forenza - whoops! Anyway it is a 2007 automatic with about 25K miles. It started doing the following: while driving it will seem to slip into neutral and rev. For example, driving on the freeway at 65 mph; foot slightly on the gas it seemed to literally jump out of gear and the rpm shot up for a few seconds and then jumped back into gear. It also some times seems to clunk into reverse when backing up and occasionally seems to be in a lower gear than necessary when driving - revving while staying in gear - literally like it is in a lower gear than necessary. It has a 7 year/100,000 mile power train warranty. I took it to the dealer and they said they needed to replicate these things themselves before they could do anything about it. They would not just take my word. The service manager also said that it could be the computer system as opposed to the transmission itself.
View 1 RepliesTranny rebuilt, truck in sig, and beefed up 2 1/2 years and 30K miles ago. Recently started going into D after 10 to 20 seconds after putting it in gear, cold or hot. Very frustrating, especially when trying to maneuver a trailer.
Transmission builder has been running his shop for 20+ years, all makes and models, not Ford specific. I choose him because he runs a local business, has a good reputation, and happens to live less then 1/4 mile from me.
I have searched the forums, and read where Mark says this is loose valve body bolts, or forward drum going out. Builder can't grasp where it would be drum seal if it doesn't do it all the time, which it doesn't. He said it sounds more like something electrical, but there are no codes stored on pcm.
Builder also said he would pull tranny to check drum. Does this sound like I'm moving in the right direction? Or can it be something else?
I need to solve tranny problem, it started out a while back, would not shift back into drive after stopping at stop sign (after driving fine for about 20 miles) thought maybe dirty filter so did fluid and filter change seemed to work for a while then started again noticed it was mostly after using cruise control, but u joints were very bad, so replaced 2 of the 3 and worked fine for about a thousand highway miles, then got really bad. Now when I check the tranny fluid cold and /or hot it is way up on the dipstick. Took to ford dealer in ladoga, lied and said no speed sensor codes, but list on the paper he gave me had all kinds of abs and a p500 code.
View 9 Replies08 Expedition... I drive an automatic and I frequently shift to neutral during down or cruise to a stop light. Does this affect the gear assembly, brakes, etc.
View 13 RepliesI ran into an issue on my rebuild. I have a 1978 F-150 Ranger 302 V8 2WD Automatic. (Just to makes things easier) back to the point. I had the reverse go out completely on the tranny, and have not had any luck what so ever finding another I could buy.
View 5 RepliesI'm a new owner to my first 4x4 vehicle. My vehicle is a 2007 f150 xlt. Today while I was driving into work I had my vehicle in 4wd high. As I was going down hill I let off the gas and started braking. When all of a sudden my 4wd drive switched into neutral. I am wondering what could cause this to happen and whether it's an issue or not? It is snowing which was my purpose for being in 4wd.
View 9 Replies"95, 2.3L, automatic. Stalls for a couple of seconds and nearly dies when shifting from drive to neutral or from drive to park. Doesn't do it when cold at high idle or when AC is on. It catches back up and idles fine but nearly dies when coming out of drive. Installed a new idle air control valve but no change.
View 1 RepliesI have an 86 f350 with a 4 speed manual transmission, I am trying to figure out how to check transmission oil and rear end, and clutch.
View 1 Repliesi have a c6 in an off-road truck that seems to work fine but when getting up in rpm it will just act like it hit neutral. won't go in any gear. doesn't make any noise or anything. pulled it back checked fluid and it was a touch low so i topped it off. tried again and it went in reverse and forward good. no hesitation or noise. drove about half mile and it acted just like it hit neutral again. loaded it up brought it home and drove it off the trailer and in a barn.
I have had some say to check the filter and gasket. i did change it before it was taken out to drive. Been doing a lot of reading and haven't found anything close to this. its a 4wd trans with 205 t case 460 motors.
My 6'4" hubby just got in my PriusV 2012 to use it and when he tried to shift into reverse, the parking brake was on and the anti skid icon lit up. It would not shift into drive. When I got in to see what was going on, after he turned it off, everything worked fine for me. It has never done this before but he rarely drives it. Is it possible he was mashing the regular brake pedal down too hard? He wasn't hitting the parking brake getting in or anything like that, I watched when he tried a second time.
We kept trying but he ended up taking his truck instead (which I was washing for him) I know on a couple occasions making fast, hard turns into our driveway I have lit up the anti skid icon but other than some extra braking action it has not caused a problem. And once while stopped at a light and reaching for something in the back seat, I lit it up, but I forget what the car did. I was mashing the pedal down hard as I reached back. I assume in both cases the car thinks I am getting in a wreck and is taking action.
Of course, I just finished washing it but there is no chance it's anything with that? I moved it from the front yard to the back and had no issues before he tried to use it. Anyway, I had this thought about pressing the pedal too hard after he left and here I am asking.