Ford - Taurus :: Serpentine Belt Squeaking And White Smoke Coming From Engine
Mar 4, 2016
I noticed my serpentine belt started squeaking about 3 days ago. And yesterday as I was driving to work I heard a clicking sound coming from the left side of the hood, then my car started to gradually shut down and white smoke was coming from the engine. When I got to the stoplight it completely turned off, but I was able to turn it back on again to turn into the parking lot before it shut off again. When I checked it there were no visible leaks, my reservoir for my coolant was still full, and my meter never went up indicating that my car was over heating. I'm not sure what's wrong with it, but after it sits for awhile it is able to turn back on again for a while.
View 3 Replies
Advertisement
I bought a 2004 6.0L F-250 used a few weeks ago. There have been a few problems here and there that I have been competent enough to fix. I am now facing a problem of A: the truck not starting (I believe it was just a battery problem, charged and started fine). But also B: I have had a slightly frayed serpentine belt that I noticed a few days ago. After I got the truck running from my the no-start and driving it around the block I parked it and went inside. Came back out a few minutes later and I tried to start it. It hesitated a little bit but started with a loud whining noise and white smoke coming from the belt. Turned the engine off and saw on one of the bottom wheels (pulleys?) some residue that looked and smelled like burnt rubber. Is this just simply a need for a new belt?
View 5 Replies
My mom was driving to pick me up and she said that all of a sudden about half way here that the car started making a knocking sound and white smoke started coming from hood, the car was also trying to shut itself down while she was trying to pull over. It is a 2000 ford taurus with like 130k. I am so scared that it is the head gasket because my mom, myself and my daughter, and my 16 year old sister all share that car to get around. Is there anything else it could be besides that or is that probably what it is?
View 19 Replies
So i have a 1998 4.0 ohv ranger and have been fighting belt squeak shortly after i got it. I've replaced the belt twice and the tensioner twice when i put a GATES belt on it stopped for like month. But its still squeaking. If i put a wrench on the tensioner and turn it the squeak stops. So i need to find a way to tighten the tensioner could i somehow jam it, our hook up a turn buckle bolt to manually tighten it, or use a different ford tensioner. I really need to do something cause this squeak is just down right annoying.
View 2 Replies
My serp belt squeaks due to contamination due to timing cover leak. I removed belt and cleaned it with mild degreaser solution and it was quiet for 1 day. If I had 100% water in cooling system, would any more leakage cause a belt squeak? I am putting off fixing timing cover gasket since it is a 5hr job. Coolant is @ 90% water concentration now.
Taurus 3.0 Vulcan motor.
View 9 Replies
I have a problem with my 1997 aerostar. There is a squeaking noise that gets more significant when I turn. I am pretty sure this is the drive belt as the power steering fluid is fine. Should I attempt to replace the belt tensioner and if so is it just the pulley that needs replacing or the whole tensioner. I am by no means a mechanic but can figure most things out.
View 5 Replies
I've been hearing a slight squeaking near the belt area. It's not continuous. Does it for a second then stops for a second and continues.
I hear it a lot more when I put the heat on through the top window (defroster). Never noticed it until it started getting cold. You think it might just be the belt? Or what?
View 2 Replies
So this car has only 50k miles. It was really cold in the sierra (around 20F) and the car started making a squeaking sound. I assumed it was just belt warming up, but when I opened the hood later, I saw shredded plastic. No CEL's! Seems to run smooth.
Where this came from? Is it part of the serpentine belt system?
View 20 Replies
Ok, I have 1997 Ford Ranger, 4cyl, manual transmission, and more miles than I'd like to admit to.
Yesterday, I noticed that one of the vacuum lines was coming dangerously close to hitting the serpentine belt on the front of the engine. The clamp that normally holds the vacuum line in place rusted away a decade ago, so I decided to use some velcro ties to attach the line to the positive battery cable. I didn't twist or pull on the cable in any way and the vacuum line isn't applying any force to the cable.
I get in the truck a few hours later, hit the key and I get >click<, but nothing out of the starter. One click when the key is in the start position, nothing more (as opposed to click-click-click).
Not thinking about my repair earlier, I went down to Autozone and had them test the battery - 12.8V and 550CCA, no problem there.
So then, I thought well since the click is coming from the starter relay, maybe that's where the problem is. I read on another forum that sometimes the starter relay can be resurrected temporarily by hitting it with a hammer. Which I did. And it did work! Now the truck is starting up normally every time, but I'd like to replace whatever was bad.
My questions :
1. Did I prove anything by hitting the starter relay with a hammer and then starting the truck?
2. Should I still be looking at the battery cables?
3. Should I stop hitting random parts with a hammer and take this truck down to a real mechanic before I do serious damage?
View 8 Replies
I just replaced the original serpentine belt at 95k miles (more preventative than anything) and now it's squeaking. Does this mean I have to replace the tensioner?
View 11 Replies
Long story short is, I replaced my 2007 Santa Fe's serpentine belt and it still squeals for some time after we start the vehicle (then stops) ... but more importantly I *think* its still slipping if we're driving during rain or on very wet roads.
Long story long is ... the problem appeared as loss of power steering and air conditioning when driving during rain. Took it to the dealer and they suggested to replace the serpentine belt, replace the shroud (plastic) that covers the belt, and replace the timing belt. As we have 36k miles on it, no one I talked to understood the timing belt suggestion. I see though perhaps its just because the car is 4 years old? The shroud the dealer claimed was cracked and may be letting water in on to the belt. However, they completely removed it and did not replace it so I was not able to inspect this myself (wife took the car in for the appointment).
I bought the new belt and put it on. The squeaking was gone but as soon as I hit rain again, the slipping was back as bad as before (and we'd lose power steering / air conditioning same as before). I had a 1.5 hour drive in rain where the belt was slipping almost nonstop; constant back and forth between catching and slipping.
When the replacement shroud came in I thought that might solve the problem - keeping moisture off the belt. However with that in place I'm afraid there is still some slippage as I've noticed some dashboard lights come on during brief heavy rain. Also the initial squeaking is back when we start the car.
View 22 Replies
What a Serpentine Belt is? (how much is it for that part alone and to install at the dealership?)
Dealership told me why during the cold mornings after I start the car up, it is creaking and squeaking........
They told me it needs to be replaced?......
View 14 Replies
Ok so basically, driving it around at 50ish mph or less and my car is fine but once I reach I-95 no problems yet. After about 10 miles at Interstate speed (on my way to work), I happen to notice an odd sound coming from my engine. It almost sounded like as though an airline plane was starting up. I checked for any warning lights going off; nothing. After about a mile I happen to smell something odd coming from my air vents (I don't have ac so I have my windows down) and then I started seeing a lot of white smoke coming from my air vents and the hood. Freaking out like a bat out of Hades, I immediately pulled over, shortly thereafter a heavy amount of white smoke was coming out even more from the air vents and from the hood so I pulled open the hood to let it escape and left the doors away from the interstate open.
I saw smoke coming from the engine coolant top or whatever it's called and it was coming out so fast and hard it was like making a whistling noise almost. I also saw white smoke coming from almost near the engine towards the back. However, whenever I am on a normal road going 55 or less it's fine. My grandfather says it has something to do with the cooling system or coolant or whatever it was. He doesn't know what would cause the problem or how to fix it... 1988 Ford LTD Crown Victoria LX ....
View 4 Replies
Leaving on a 200 mile trip in the morning and when checking the fluids, I found the serpentine belt trying to get off the AC pulley. I've put in on twice and it immediately jumps half way off when starting the engine. How long it's been doing this. Nothing is obviously loose or moved. What is likely causing this?
View 8 Replies
I've got this weird problem , it started a month ago. Sometimes I would drive for half a hour, park the car, stop then engine and some white smoke comes out of the hood after a few seconds. But sometimes I can drive the same amount of time, park, stop the engine but no white smoke.
The only time I did notice it happening is when my temperature gauge isn't working properly , sometimes it will give the right reading (which is right on the middle) and while driving it will drop to 0. Also sometimes there is a smell of rubber burning I think (Doing my best here). But I've checked Google for people with my problem but all I read is either people with tail pipes issues or smoke directly in the drivers cabin. My white smoke is only when I kill the engine. There is no smoke coming out of the tail pipe nor in my cabin. Only a rubber burn kind of smell.
View 4 Replies
After changing the PCV valve, I decided to rev the engine to test if it was installed tightly. I noticed the engine was not hot yet, but I still revved the engine to 4000 RPM for about 20 seconds (the most stupid thing I have done), then I saw white smoke coming from the engine. I didn't check if there was smoke out of exhaust pipe. After searching the web, I realized I might have damaged the head gasket.
The car is still drivable, and the temperature was normal during the driving. But I feel really bad since I have killed the engine. So, how much damage I might have possibly done to the engine?
View 19 Replies
Okay so basically I was driving today when I noticed the smell of burnt toast. Didn't think anything of it so when I turned off my R I noticed some faint white smoke coming from my engine bay. It appears that the smoke is coming from the left side of the engine, when I pop off my engine covers, there are two hoses (one going to air intake/one going into intake manifold). It looks like its coming from either one of those hoses or somewhere below. I don't see any leaking fluids or anything.
View 4 Replies
I have 1997 F250 LD since i bough it has been doing this chirping sound coming from the serpentine belt and the pulley area but when the truck has been working for 15 - 20 min it goes away
This is apart from the from the problem before I think the fan clutch is broken because when I start the truck I can hear the fan going at the same speed of the engine is that normal ? even when the truck is cold
View 3 Replies
I'm pretty sure I have a blown head gasket. I have white smoke coming out of exhaust and the oil is brownish in color indicating radiator fluid is leaking into engine. The car has over 200K on it. I purchased Steel Seal. The guy I talked to from Steel Seal said if radiator fluid is dirty (which it is)than I should flush radiator before using product. I don't have money to replace the gasket and I don't have money for a new car right now. Can this be a fix that gets me through a couple months?
View 3 Replies
A noise has been coming from my Serp belt for awhile. My serpentine belt doesn't have any wear. At least It doesn't look like it. Will this noise go away by replacing it? or is it something else? Is it the tensioner? I've noticed when car warms up the noise goes away. I do not know the last time it was replaced.
Here is a video : [URL] .....
Car - 2001 Jetta TDI with 230k miles.
View 5 Replies
There has been a noise coming from the serpentine belt area for some times now, and I thought when I get to work on the belt I will get it fixed.
Last night, I replaced the alternator with a brand new one from idpart with a clutch pulley (the original pulley was plastic). I also replaced the tensioner and serpentine belt with this kit from ECS: [URL] .....
Everything was put back tight and nicely. Turned on the engine: the noise is still there.
For sure there is one pulley on its way out, but with one?
Video here: [URL] .....
Noticeable @ 0:47
It's a 2.0 AVH Jetta.
View 3 Replies
