Ford - Taurus :: 2005 - Hard Shift Auto Trans
May 29, 2014
My 2005 Ford Taurus (3.0 liter engine, auto trans, 117K miles) recently began shifting hard (dropping suddenly, not smoothly) only on the 2-3 shift at 20 MPH. The check engine light is not on, and the car functions perfectly otherwise. A mechanic removed the trans pan, replaced the filter and fluid, and added Lucas additive. The interior of the trans was clean, and did not have a burned smell. The 2-3 shift did not improve.Could it be a valve body or a solenoid? Is it repairable? I drive it gently, and the problem hasn't gotten worse (2 months). What's up with my trans?
View 1 Replies
Advertisement
What is going on with my dad's car. This car is a 2000 Ford Taurus with about 160,000 miles. In the morning, when he starts the car and drives away, sometimes the speedometer will not work and the automatic transmission will not shift out of first gear. After a few miles, the transmission will suddenly upshift and the speedometer will jump from 0 to the current speed. The door locks will also lock at the same time (they normally lock upon reaching a set speed). However, the car can be "forced" to shift, start the speedometer, and lock the doors by accelerating to 5000 RPM. The problem appears to have something to do with the vehicle speed sensor, but I don't know what exactly is wrong with that system. The car also knows that something is up as the Check Engine light is on.
What might be wrong with the VSS that causes this problem?
Why can it be forced to shift at 5000 RPMs?
View 4 Replies
I have been having an issue with my 4-5 gear shift under hard acceleration and know that a rebuild is due soon but I was wondering if any high performance kit available with all the clutches and friction discs needed to rebuild.
View 6 Replies
A friends son just bought a 94 powerstroke. auto trans. it will not shift out of first unless you let off throttle. but once in second it shifts fine, until you stop and go back to first. I am thinking bad or sticking second gear solenoid, but do not want to give bad info.
View 1 Replies
My 97 Taurus shifts hard going into 2nd gear only. It started as just a cold problem but now does it all the time and there are no computer codes stored.
View 2 Replies
'06 Camry base 4 cylinder. How do you shift auto trans into "L"?
View 2 Replies
I have a 2006 F250 with the 6.0 PowerStroke and automatic transmission. I just purchased this truck at an auction about a month ago.
Today I notice the transmission is not shifting into overdrive. No warning lights. If I press the tow/haul button in no change but the tow/haul light does come on. If I press it again (to turn it off) the tow/haul light goes out but still the transmission will not shift into overdrive.
This leaves me at about 2000 RPM at 68 MPH. I just had a Ford dealer perform Transmission service last week. (20,000 miles after the last recorded service.)
I am already not happy with the service I received at the dealer so I am really hesitant to take it back to them if it is something not related to the transmission service they performed.
View 5 Replies
I have a 99 Taurus. Had the car about 2 and a half years. When I bought it the previous owner said he had the transmission rebuilt a year before,(he did have the repair receipt). Some times, not all, after you've you had to accelerate hard (like getting in a highway),or after a long drive, the car starts to shift hard. It also seems to go from first then neutral then second when taking off from a stop. A quick hesitation,rpm's go up a little,then shifts. I can park,turn the car off, sit a few minutes and it goes back to normal shifting. What this issue is? I thought about changing the filter and fluid,but I've known a few people that have done this while having issues, and the transmission went out soon after! I can't afford a rebuild! What to do? What to do?
View 10 Replies
Everything was working perfectly. I stopped at McDonalds to get a bite to eat. When I left McDonalds, the car would not shift out of first gear. I have checked the transmission fluid and it appears to be good. I shifted from Park to low, and low back to park several times making sure there was no problem there. I noticed it also kicks hard when going into reverse, and it kicks hard when going into drive. When it is driven it will not shift out of first gear.
View 8 Replies
My VSC and check engine light have come on. In addition now the auto trans will not shift past 4 gear with in auto or with me doing it manually. My local shop who has worked on this car before and is very good put the computer reader on it and got a P0500 for vehicle speed sensor "A". Today they put it on the real monitor and it reads a different code that says check engine code but does not reveal the code to read.
I really don't want to go to my dealer and get it hard. The car has 175,000 and until now has run great. I tried the gas cap fix to no avail. The shop did a reset when i first got there and it last 75 yards.
View 6 Replies
I have a 2004 Hyundai Santa Fe, has 99,000 miles 3.5L. After changing the alternator (alternator did die and drained my battery, the shop recharged the battery) now it seems be stuck in 3rd gear and does not wont to shift (it is a automatic). Fluids are good, transmission was flushed between 50-60,000 miles.
View 3 Replies
The auto trans on my SL has been shifting hard and jerking lately, and the other night it wouldn't shift into 4th at all and I got a CEL code having to do with the transmission solenoid. So to my question; how hard is this solenoid to replace, and were is it located? Also, need to get part number? Additionally, I check the fluid every few weeks so I know that's good, and it seems to get worse (more jerky) when its hot.
View 3 Replies
1999 Jetta MK4 with only 124k miles on it. Everything is fine with the car except when the car shifts from 2nd to 3rd it is jerky/violent/forceful everything else is good with car except check engine light is on but I don't really care about that and I'll go check with autozone to see what the code is. I am able to feather the gas when I know its going to shift and I can make the shift pretty smooth. My question to all the experts is does this mean that this tranny is on its last leg or does it still have a lot of life left in it. My old Cabriolet did it for years and never was a problem.
View 5 Replies
Is there an easy way to do this...???
View 2 Replies
I'm having a little issue with shifting into first. Once in a while it simply will not go in, like you're pushing the shifter against a brick wall. If I turn off the truck and turn it back on, it works absolutely fine. I can shift into 2nd-5th no problem at all times. Is it just the shift linkage, or...? I'm not really sure where to start.
View 7 Replies
For a few months now I have been hearing a tap clunk type noise coming from under the car when I shift the auto trans into drive and reverse. Also sometimes when the car is slowing when driving I hear the tap sound as it shifts into first. I drove in by my local dealer and they listened to it and said Elantra transmissions can get noisy there is nothing wrong. They told me I have plenty of Warranty left so if something happens I will be covered.
View 2 Replies
My tranny is slipping all over the place . I recently less than 1500 miles ago changed tranny fulid, tree branch and TP filter, ford filters, and 8 to 9 quarts of mercon SP. My truck is shifting like a bucking bronco. Came up with PO671. So should I replace just the 1 solenoid. Or all the valve body? I plan to run a gauge in cab to see shift pressures for testing purposes to aid in troubleshooting for current issue... reason for fluid change is history unkown.
2004 6.0 f250 4x4 tourque shift OdO is 163,800...
View 14 Replies
I own two of the most hated cars on this show, a Renault Alliance and a Peugeot 505 V6. On the 505, the transmission was shifting pretty roughly, it was knocking hard. I bought another 505 for spares that was shifting smoothly. So this summer, I decided to spend 4 weekends on hard labor and I swapped the ZF automatic transmission from the rough car to the good one. After all that job, I didn't notice any real difference. So I guess it was the torque converter that I left on the engine?
Anyway, I decided that it will stay like that because I will rather take a bullet than drop this tranny again. Now yesterday, it was -30?C outside, after 3 months of storage outside, just for fun, I tried to start it. It started right on! So I let it warm up for few minutes then went for a little ride. Big surprise, it shifts very smoothly now in cold weather... So what's wrong? Wrong type of oil? I filled up with the one suggested in the owners manual!
'87 Peugeot 505 STX V6
'87 Renault Alliance DL
'70 Renault 16
'97 Volks Transporter T4 (Eurovan diesel).
View 3 Replies
is it the clutch or the shifter or something else? I did have to replace the 2 shifter cables about 18 months ago as they broke, but lately, it is having a very hard time going into gear, especially 1st gear when stopped. It's so bad my wife won't drive it any more. We love our 35mpg Saturn and want to keep it running well.
View 7 Replies
2005 tundra sporadically misfires/sputters after slowing/downshifting (autotrans) to 2nd gear.....then when accelerator is kicked a bit the engine wants to spit/sputter like a misfire or flooding..... V8 engine by the way.
View 2 Replies
I have a 2005 Ford Focus Man Trans, and am having issues getting it into first gear and into reverse. This happens most often when the car is cold. I am kind of wondering what it may mean before I take it in to have the issue fixed. It has 65 thou miles on it and I would think that I don't need a new trans already?
View 8 Replies
