Ford Super Duty (1999-2016) :: Windshield Washer Fluid Pump Not Working
Mar 27, 2017
I have a 2005 F-250 6.0 Powerstroke.
My washer fluid pump is not working, it was a few weeks ago but now it is broken. The Owner's Manual only has the listing fuse 33 for "cluster, 4x4, wipers". It looks like some of the older models have an actual fuse for the "washer fluid pump". I checked fuse 33 under the dash and it is ok. What fuse controls the washer fluid pump?
The pump does not make noise when activated, so I'm starting at the fuse but I don't know what the hell is going on.
View 5 Replies
Advertisement
My new to me, 2005 F-250 windshield washer nozzles don't work. I have replaced the windshield washer pump, cleaned out the washer fluid container and rubber filter screen, blew air through the lines and the passenger side nozzle barely sprays and the driver side nozzle does nothing at all. I guess I have clogged nozzles. What is the part number or place you bought them? Looked online and everything I can find is so generic.
View 14 Replies
2004 f250 wipers and fluid not working Done the usual stuff checked the fuses in the cab and the 15amp fuse is good and the 30 amp fuse is good. Is there something under the hood i should look at?
View 3 Replies
2011 F250 with hood mounted windshield washer nozzle. How do I remove the nozzle? In a campground with basic tools.
View 6 Replies
I have an 04 F250 and the driver side windshield washer doesn't spray on the windshield. It sprays a stream up high on the windshield. Is it possible to replace the spigot where the spray comes out? Is there another solution?
View 7 Replies
My windshield washer has recently just sprayed up about a foot.
Will adding some vinegar to the fluid and see if it will unclog?
Or does this just mean that my pump is giving up?
'99 F250 SD V10
View 7 Replies
Filled up the windshield washer tank this morning and could not get the sprayer to work. Looked under the truck and it looks like all I put in is on the drive. Any one else had issues with 2011 F350 washer tanks?
View 3 Replies
I have a 2003 Explorer Sport and the windshield washer pump is not getting power. Owners manual does not show fuse or relay locations.
View 2 Replies
I have a 2005 6.0 with 279k running pretty strong. I met a mechanic that has the same year truck with 700K!! He showed me one of his mods and he used a longer line on his windshield wiper fluid and put a Tee Connector on the line and ran it into his intake for the turbo. He said he will use it when cruising along sparingly but it cleans his turbo and such. Is this a water injection hack?
View 6 Replies
I have no windshield wipers. Since i bought the truck ive fixed other issues but cannot figure out the issue with the wipers. Tested for power not sure if it's accurate but seems like there is power to the harness to the motor but not 100% positive.... Can it be the switch? Blinkers and rest on same switch still work but no ww. I also dont hear clicking from a solenoid like ive read on some research.. Fuses are all good pulled everyone out since they arent labeled with numbers next to them...im at such a stand still and cant drive the truck was screwed the other day when we got sun showers for nor reason and i was on a major highway.
View 6 Replies
I just bought a 1995 S10 4x4 for my son and the windshield washer pump is not working. It doesn't make a sound and I have measured that no voltage is going to the hot side of the harness going to the pump. The ground tested fine. It was also having wipers issues where they stopped at random places when turned off and the timing was screwy. I removed and resoldered the wiper pulse board and cleaned up the contacts. Wipers are good, but still no squirter.
View 2 Replies
My windshield wipers aren't working. I can hear the relay click and I've checked the fuse. I found this ground wire, what it goes to?
View 1 Replies
On my 02 f350 xlt my turn signals work but not my wiper speed switch, when i put the small fuze in, the wiper go full speed and wont stop unless i pull the fuze out... What could be wrong?
View 3 Replies
I have a 2006 Solara and overnight the windshield washer pump stopped working. I thought the problem was no washer fluid, filled it, and nothing. I checked the hose near the hood and nothing came out. The motor isn't humming like it is trying to pump, so I checked the fuse (I think I checked the right one, not sure, it was a 15a) and it appeared to be good. I checked the wires going to the pump with a multimeter and didn't get power, so is there any other "secret" fuse I am missing. I know on an older car I had, the fuses were sometimes mixed with other items and not labeled.
View 11 Replies
The water pump on my 2015 350 (6.2L) failed this morning and the dealer says it needs to be replaced. What might have caused it?
View 6 Replies
2016 F250 with less than a 1K miles and the power steering all but stopped working at low RPMs. Once it got going it would start working again.
View 1 Replies
Got a problem with my wifes 2016 Elantra... The washer fluid pump stopped working.
The wipers work, and their is no blockage in the fluid lines from the tank to the nozzles. I used my compressor to blow out the lines in both directions. I've done some research, and someone said if the wipers work its not a fuse issue.
I saw a video on you tube for an older Elantra, that showed the pump behind the headlight... Does that hold true for the 2016? And if so, how do I get the headlight assembly out?
View 5 Replies
1999 F250 5.4l base work truck. My problem is wipers, washer do not function. It all started with my wipers staying on. I removed the fuse to stop them. When i put it back in nothing. I have bench tested all relays, checked fuses, put in a new mfs, put in a new/used gem, checked all wiring i can seem to find, refreshed grounds etc. I am starting to lose my mind with this thing.
I have gone through all of section A and B of these tests [URL] .... except for the NGS scan tool.
Tonight checked the pins at the central junction box relays to see what was going on. This is where things got interesting. i have constant power at pin 5 of the run/park relay. if i jump this to pin 3 the wipers run. Pin 5 of hi/lo and washer show no voltage, however show continuity to ground. pin 5 of run/park also shows continuity to ground.
With the key on I have 12v at pin 1 of the hi/lo, run/park, and washer sockets. when cycled through the switches show i have continuity to ground on pin 2 of all sockets as they should. However, when relays are in place they do not "click" over.
What am I missing here? As much as I'd hate to do it, I may end up just throwing a switch in to "jump" the run park relay for temporary single speed wipers.
View 3 Replies
I have a windshield washer fluid leak. It's leaking onto the passenger side floor under the dash. Any have a good place to start looking or how to access the area it might be leaking at?
View 6 Replies
Last fall had one day for about three miles where wipers and washer wouldn't shut off. Now they won't stop at all. Thought the multi switch might be bad, removed whole switch and unhooked. Washer pump and wipers were still on and wouldn't shut off. Had to pull the fuse.
View 4 Replies
So either these trucks have a super small window wash reservoir or there is something wrong with my truck. The window washer works just fine and then stops. The washer motor is still working but nothing coming out. I fill it up to the top again and suddenly it works just fine. The thing is that when I fill it up it only takes between 1 and 2 quarts of water. I'd imagine the recover probably holds close to a gallon so not sure why mine quits working and then is full after 1 to 2 quarts of water is added. Perhaps the pickup tube in mine is bent or something? No light or message on the dash...it just stops.
View 3 Replies
