Ford Super Duty (1999-2016) :: What Size Tube To Fit For Brake Bleeder
Apr 17, 2015
2010 F250, what size tube do I need to fit on the brake bleeder screw? The tubes I have are all too big and the size marks are no longer legible.
View 4 Replies
Apr 17, 2015
Advertisement
Ford Super Duty (1999-2016) :: 2003 F250 - Rear Axle Steel Brake Line Size?
I made a bone head mistake and crunched the steel brake line between the rear axle and the passenger side sway bar mount. Truck is a 2003 F-250 with a 7.3. I would like to go to the auto parts store, get bulk steel brake line and bend it myself. But, I don't know what size the line is or what size the fittings are. Whatare the sizes???
View 3 RepliesFord - Focus :: 2006 - Size Of Rear Drum Brake Bleeder Valve?
I replaced a brake cylinder on my 2006 Focus rear drum brake. Now, I need to bleed the brake fluid, but I can't find a wrench to fit the nut.10mm is too small and 11mm is too big. What's going on? Could it be the rusted nut has grown in size enough to make the 10mm wrench too small? Or, is the nut standard?I know the drum bleeder nut I know the front disc brake bleeder brake is 10mm. So, I am thinking the rear should be metric, but since it's drum, I am not so sure. What the size is?
View 13 RepliesFord Super Duty (1999-2016) :: Heavy Grease Smell / Bleeder Valve Is Broken Off
2003 F-250 SD 7.3L Supercab
Problem 1: Right rear
Occasional smell of heavy grease, white smoke billowing out from under wheel well (once), black fluid leaking from lower area of caliper. Told it could be axle seal or caliper. I'm leaning toward axle since the caliper is only 1 yr old (NAPA OEM).
Oddly, I also notice a loud, piercing screech when going around traffic circles or exit ramp clovers to the right. I thought this was my trailer until it did the same thing without it.
Axle or Caliper?
Problem 2: Left front
Local mech advised the bleeder valve is broken off in to the unit and cannot be simply replaced. Insists it needs whole caliper. If pedal is all the way up there is a temporary breaking capability then it slowly creeps to the floorboard, hits a brick, and keeps rolling. Replaced master cylinder a few months ago when it same. Drove it for the last 2 weeks and problem is back.
Removing broke-off bleeder valve instead of replacing cals?
Ford Super Duty (1999-2016) :: Going Down In Wheel Size?
So just as I think I have it figured out what size tire and wheel combo I want to go with, I began thinking about going from an 18" wheel to a 17". I can save some cash, have a few more tire size options and save on tire weight.
I know alot of guys go up to a 20" setup but that's just not my preference on trucks.
Any negative to doing this? 315/75/17 tire size interests me. Had that on a Wrangler and liked the look. Going to look a little more at 17" sizes before deciding.
Ford Super Duty (1999-2016) :: Dipstick Tube Replacement?
The dipstick tube on my 5.4 snap and ive ordered a new one. it looks like it may not be to hard to replace.
View 4 RepliesFord Super Duty (1999-2016) :: Bed Side Sticker Size?
I am looking to replace the 4x4 offroad sticker on the side of the bed and wanted to know the dimensions. I've been looking on eBay because dealer wants way too much for stickers. just want to make sure I get the correct size.
View 5 RepliesFord Super Duty (1999-2016) :: F350 - Lug Nut Size Info?
I bought a new 2016 F350 SRW and ordered the 17" aluminum wheels with 245 tires specifically to put on my 2005 E250 cargo work van.
I bought 20" Platinums for the F350 and used the existing lug nuts.
Now I need the flat faced washer type lug nuts for the van so I can use the new aluminum wheels. Are they the same thread as the F350?
Ford Super Duty (1999-2016) :: Grille Badge Size?
i know the 05-07 grille badge is 9 inch the 08-11 is also 9 inch and the 11 up is 12 inch
wondered if there was a ford oval that was between the 9 and the 12 inch
Ford Super Duty (1999-2016) :: 2000 - Socket Size To Remove Lug Nut?
What size socket is used to remove a lug nut on a 2000 F350 4X4?
View 6 RepliesFord Super Duty (1999-2016) :: 2015 - Fuel Tank Size?
It doesn't say on the window and in the owners manual I should have a 23 or a 35. The most I've put in my truck is 29.somthing and I had 3 miles till empty and the needle was in the red. I'm thinking I have a 30 gallon tank but how can I find out for sure.
I have a 2015 F250 6.2L CC SB FX4
Ford Super Duty (1999-2016) :: 2003 F350 - Pitman Arm Nut Size?
What size the pitman arm nut is? And where to get one? I am lifting my truck soon and I'm going to double nut that baby on there. I know they're prone to loosening. I just wanted to have all the parts before I started.
View 4 RepliesFord Super Duty (1999-2016) :: New Shifter Tube Now Key Won't Come Out And Steering Wheel Not Locking
Today I put a new shifter tube in a 02 f450. Everything works well, but the key won't come out and the steering wheel won't lock. Was told there is a button to push by the turn signal side but don't see any. Looked around top and bottom of column and didn't see anything out of place. Also found a black wire with a pink strip not connected to anything. Touched the wire to the column and key dinger sounded. Where should this wire be connected?
View 10 RepliesFord Super Duty (1999-2016) :: Excursion Won't Start After Changing Shift Tube
I changed the shift tube in my Excursion today. I'm trying to put the key switch back in. It will go in and rotate fairly hard. I can not get the key to release. When I hook the battery back up, everything functions as it should but it won't start, the key won't release and it still turns hard. The dash lights come on and such when the key is turned to run. I tried a different key with the same results. Everything looks good.
View 1 RepliesFord Super Duty (1999-2016) :: 2001 - Dipstick Tube Rusted And Snapped?
OK, so I have a 01 f350sd and i went to check my oil and the dipstick tube itself is so rusted it snapped in half so I took it to the dealer which I knew was going to be over priced labor but still checked the tube itself is 20 dollars but labor is upwards of 300-500... My engine is the 5.4 triton.
View 2 RepliesFord Super Duty (1999-2016) :: Pan Bolt Size - Rust Started Weeping?
What is the thread size/length of the 20 transmission pan bolts on the 4R100? I am replacing the pan since the rust has finally started weeping ATF, and the bolts need to be replaced as well, they have turned into little rusty nubs. So i want to use stainless ones. I could pull one and go to the hardware store, but what is the size i can stop on the way home.
View 14 RepliesFord Super Duty (1999-2016) :: Rear Shock Absorber Bolt Size?
What is the size of the bolts on the rear axle that hold the shock absorber? I believe its an M12 x70 mm long??
View 7 RepliesFord Super Duty (1999-2016) :: Broken Dipstick Tube At Block On 5.4 Plow Truck
I just finished putting a 7.3 back in one of our f450 plow trucks today, so then i moved onto our 2001 F250 5.4 plow truck. The dipstick tube was rusted in half so i pulled on the remaining half to get it out and put in the new dipstick. However, it broke off at the block. So now i cannot see how to get the rest out with out doing a lot more work. I haven't removed the splash guard yet but will i have to remove the manifold , the oil filter base, or both?
View 14 RepliesFord Super Duty (1999-2016) :: 2002 - New Shifter Tube - Key Won't Come Out - Steering Wheel Won't Lock?
Today I put a new shifter tube in a 02 f450. Everything works well, but the key won't come out and the steering wheel won't lock. Was told there is a button to push by the turn signal side but don't see any. Looked around top and bottom of column and didn't see anything out of place. Also found a black wire with a pink strip not connected to anything. Touched the wire to the column and key dinger sounded. Where should this wire be connected?
View 14 RepliesFord Super Duty (1999-2016) :: 2009 F350 4x4 - 18 Inches Rims - Tire Size?
Im just about due for some new tires before this next michigan winter. I have 18" rims with the stock 275/70s. What size can i go up to with out any trouble?
Also. I have michellin ltx/2 now. Mostly highway miles with some muddy job sites and also to my 8000lb camper 6 times a year.
Ford Super Duty (1999-2016) :: F250 - What Size Socket For Center Bearing Replacement
1999 F250 CCSB Lariat 5.4, 2 wheel drive. I plan to replace the Driveshaft Center Bearing in the next few days. What size is the Nut that I have to remove to remove the yoke next to it so I can press the bearing off?
View 4 Replies