I did a search and could not find a post I had read regarding mirror vibration after replacing the mirror and back panel of a side mirror. I snapped in the new mirror and everything works properly, but the mirror vibrates so badly you can't see. Somewhere there was mention of a clip to dampen vibration.
View 3 RepliesMy idle goes real fast 2500 rpm special when is warm can't get idle to go down for nothing took truck to camping on dirt road with the vibration idle came back to normal and stay for while and over the soon start again. No code...
View 1 RepliesI have an 02 f250 5.4. I just did the intake manifold. I also changed the spark plugs and the valve cover gasket. Following this I drained the oil and filled it with fresh oil.
It started right up but it felt like the engine was really vibrating and running rough. The check engine light than came on. I don't have one of those tools to diagnose it.
What could be wrong?
Got the new truck on Monday and I am trying to figure it all out
The mirror defrost comes on with the rear window defrost, my question here is does the defrost image on the mirror light up when on?
I bought a 2004 F250 SD XLT 4X4 crew cab which was a a roll over. The cab was replaced with a KR cab, its believed this was from a 2 wheel drive truck. My issue, the electric 4x4 does not work on the truck I have to get out and put it on manually.
Also, the ABS light is on the dash is on and the ABS doesn't work. The overhead panel doesn't work either. A friend of mine believes it could be a wiring harness issue but isn't sure replacing it will have any effect on the 4x4 and the ABS.
In the last 15k miles, I've replaced the led lights on my driver side mirror twice already, and come to see this morning: they are out again. The turn signal LEDs still work, but the parking lights don't work anymore. Passenger side is fine.
View 3 RepliesSo both the mirrors on my new truck are cracked. Driver side got hit, and the passenger side just doesn't respond, might just be a power thing. Anyways I'm wondering if there is any hassle to switch to a different style of superduty mirror? The 08 ones are really nice, if I can find a set for a decent price. Mine are just the basic ones, they look like half ton mirrors. I'm pretty sure they would just bolt in, and wiring really is no issue for me either. Just wondering if would encounter anything that might be an issue.
View 2 Repliesgot a quick question, i have the 1aauto 2008+ mirrors on my truck. How do you take the mirrors apart? When it rains or i wash the truck the bottom of the mirror fills up with water, and it slowly drips all over my doors when i drive the truck and when i open or shut the doors the water sloshes around and again gets all over my door. I want to remove the bottom piece (if it comes off) and drill two drain holes, i would do it on the mirror still but im afraid id hit the wires or something for the heated/power functions
View 5 RepliesThe red door panel light that comes on when the door is open did not work on my 04 F250 Lariat. I removed the door panel to fine there is no whires for a light. My 01 xlt has them, were they a option?
View 7 RepliesBlinking instrument panel. When I turn my key on in my 99 F350 power stroke everything inside the cab just starts blinking like crazy motor turns over just fine but it won't start.
View 1 RepliesI have an early 99 F250 that I'm putting 08+ mirrors on. I'm not real sure what year they are, but no wiring diagrams I can find match up. See, my mirrors have 12 wires. All diagrams I find have 10. The colors don't match either. I wanna wire these up but I can't decipher the wiring.
View 2 RepliesHow to change the bulbs in my outside mirrors.
View 2 Replies I have a 2016 F250 XL and I want to put smaller outside rear view mirrors on her. I thought I can't be the first person to want to do this but repeated searches haven't turned up a bit of information.
I have the stock XL black plastic tow mirrors. They are manual extension and manual fold in. No heat, no lights, nothing. I want to go to a smaller, non-towing mirror like comes on stock F150's, chrome would be OK. In about 18 months I will want to go back to my trailer towing setup. I need to be narrow for a while.
These are the non-towing mirrors. The truck was pretty well used when I got it; one tow mirror was broken, the glass in the other wouldn't move when I used the switch.
I found a set of power non-towing mirror locally and installed them. They dont work. I tested the switch and the wires at the connectors and I am getting 12v to the mirrors.
So I was thinking maybe it was a ground problem???? Then I took a 12v test light and probed the mirror wires at the connector (clip connected to ground) and then the mirrors slowly moved. I remove the test light and they don't work. Now I am confused.
No special extraction tools are required, just a small jeweler screwdriver.
Push the screwdriver into the back of the connector, to push the Red terminal locking bar loose, then extract from the front.
Would someone with a 00-07 take a picture of there 7 pin power/signal/heat/ mirror plug for me? I need the pin location of each of the wires because my aftermarket ones do not have the same colors as the factory plugs.
View 1 RepliesHow to fix a broken drop tab on my 06 super duty driver door panel.
View 3 RepliesJow to best remove the passenger side kick panel on my 2001 superduty. There is a plug I am looking for to make the clearance lights work. It looks like the kick panel continues under the door threshold. I don't want to remove any more than I have to.
View 10 RepliesI need to remove the panel to the left of the dash that has the headlight switch and AC outlet in it.
View 1 Replies2007 F-250 One light in the tach is out, my question is how do I get to it to replace it? Are these instruments lit with conventional bulbs or solid state circuitry?
View 2 RepliesMy '99 Super Duty does NOT have power windows; old school cranks. The door panel(s) are "no frilz", no storage pockets. I want to know if it's possible to get panels that DO have pockets and will "fit" my crank handles?
I could always just drill a hole into a door panel that has the pockets for the window crank, but, they all seem to come with power window setups (opening for all the power switches). Also, where I can get rugs to cover the floor - I just have a rubbery/plastic surface.