Ford Super Duty (1999-2016) :: V10 - Coolant Leak Where Heater Core Tube Goes Into Intake At Rear Of Engine
Mar 11, 2014
I have a leak where my heater core tube goes into the intake at the rear pass side of engine. I have read that this part is pressed in. I dont want to remove the intake since i just paid $400 to have a new gasket kit put on. My question is can I bypass this tube with a hose from the water pump like in this video?
FORD 4.6 , 5.4 , 6.8, HEATER HOSE UNDER INTAKE REPLACEMENT THE EASY WAY !!! - YouTube....
If I can do a rubber hose like in the video I was to make sure that the tube just goes through the intake and that it does not supple coolant into the intake??
View 13 Replies
Advertisement
I have a 2011 F350 diesel 6.7l. I have had this smell outside the front of the vehicle for months and so I took it finally to a dealer to solve the leak problem. They spent hours on it and eventually found a leak in a tube at the rear of the engine under the intake manifold and supposedly solved my problem. That was 2 weeks ago and I have driven about 300km.(180 miles) but the smell is still noticeable. How long should I wait before it goes away or should I return it to the dealer for further work?
View 6 Replies
I've got a 01 sbcc 2wd 5.4 gasser and I've gone thru 3 heater cores in 18 months. Is there something I'm missing?
View 14 Replies
I recently replaced my heater core on 2001 F250. Would be a simple job if it weren't for the quick connects on the hoses. Any tool to take these apart on the truck where space is limited?
View 1 Replies
Started to attempt to replace the heater core in my 08 SD 6.4. Didn't know the entire plenum has to come out in order to replace it. How to remove the plenum? My buddy is a Ford tech but I just am not getting what he is telling me and there is next to nothing coming up when I try to search.
View 2 Replies
I bought this truck used several months back and have ran it extremely hard. It's supposedly studded and EGR deleted. The whole engine was replaced at 183,xxx by some diesel place. Anyways, while I was driving I smelled coolant and thought that was funny so I ignored it. Anyways, My livewire tuner started seeing a coolant and engine oil increase. I figured I'd go ahead and drive it home. It got to 153 F* and the coolant was around 129 F* The oil cooler has been clogging up and I just got my brand new Ford one in.
So that will be replaced sooner rather than later. When I got home, I checked the coolant level and there was nothing in it!! It was pretty much empty. So I put the water hose on it and turned the water on and after about 2 mins steam started coming out near the turbo. I mean a crapload of steam. I turned the water on again and saw that it was coming out right next to the EGR delete. It's hard to tell exactly but looks like the intake manifold??? What could it be? It's not the hose for the EGR. The degas bottle has never overflowed, there's no white smoke except on cold starts in really cold temps.
View 1 Replies
The wife and I were driving back to Sacramento yesterday. It was pretty hot around 95 when we left Stonyford, CA after a day of trail riding with our dirt bikes. From the staging area to the freeway, the distance was about 40 miles of slow twisty roads. We average around 30-45 miles per hour with full AC running. Once we got to the freeway and drove about 20 miles, we pulled to a McDonalds at which point I noticed a weird smell and smoke coming from under the hood. We opened the hood and notices smoke coming from the middle of the engine. I also noticed coolant leaking from under the engine. I waited an hour and then pour about 3 gallons of concentrate coolant back into the system. It seems to stopped leaking. We drove another 45 miles to home. Coolant hasn't leaked. I can't take this truck out until I figure this out and fix it.
View 8 Replies
My grandfathers 99 F350, started suddenly, do not know if it was while sitting or while driving. Its more of a stream than anything else. Coming from the rear, cannot see where, appears to be toward the vee of the engine, not inside the bellhousing. The firewall insulation is damp from coolant. Doesnt start until engine starts warming up.
Is there something commonly replaced back there? Didnt want to yank the intake in 20* weather for exploratory surgery. Is not the heater hoses. Idk if the EGRs are cooled on these, thats about my only idea other than freeze plug, coolant tests good down to -20ish, hasnt been below zero in weeks (prior to leak). Not familiar with any of the modular engines.
View 3 Replies
I got my 1999 f250 super duty v10 about a month ago. It had 200,700 some miles on it. It's now at 201,865. My issue is when I turn on my heater I smell coolant. It's kinda strong. No leaks that I can see. Not in the ground or in the cab or from what I can see of the heater core. It only smells when the heat is on, no smell on the cold setting. It sat for months before I bought it from a dealership. What it could be? Ok now it sounds like I have the ticking death sound. The one people have said happens when spark plugs are about to fail. So I guess new plugs are in order.
View 8 Replies
Okay, the vehicle is a 1988 E250 ClubWagon 7.3 IDI diesel with front and rear AC/heat. I have 3 questions for you:
1. I found that the rear heater core is getting coolant flow constantly which is making my rear AC blow 75* air. These models don't have a blend door in the back, they appear to have a valve that is only allows coolant flow to the rear heater core when the heat is turned on. Problem is that I can't seem to find where this valve is located on the van or what it is called to locate it at a parts store. Where on my van this valve is located?
2. My rear blower only functions on High. I know there is a resistor set up in the rear that controls the blower speed. Before I just replace this, is there a way that I can test it?
3. Is it possible that the Resistor setup for the rear fan speed would also be causing the rear coolant flow valve to not work? I know it's a long shot, but does the valve signal flow through it when the AC is on to tell the coolant valve to shut?
View 1 Replies
Today I noticed a leak at the heater hose assembly at the right rear of the engine compartment. It appears to have special connectors and that appears to be where the leak is coming from.
View 1 Replies
My '01 Super Duty 5.4 has an overheating/heater problem that the dealer can't seem to fix. I noticed my heater was blowing cold then a few miles later it overheated pushing coolant out of cap. Next day drove fine to Ford dealer who replaced my heater core, thermostat, reservoir cap and a hose. Drove it for a day till the exact original symptoms occurred again with a gurgling sound in dash. Dealer kept for a week pressurizing system but no leaks found. Replaced my thermostat again and gave it back. I drove it 300 miles over a week before the exact same symptoms occurred. Brought back to dealer who said that air was in the system, added a bunch of coolant and supposedly got all the air out. Same symptoms still. Brought back to dealer that finally changed the water pump they said had a leak. Guess what, same symptoms. Heater will work fine for days then it will blow cold, then hot, then cold and sooner or later truck will overheat then just as fast cool down and heater will work again. Still hearing gurgling. Dealer said I don't have a HCV.
View 6 Replies
Alright, after finally fixing my 4X4 issues, now I have a coolant leak. It's on the passenger side, just above the exhaust downpipe. I can't find any leaks in the hoses, and as far as I can see it looks like it's coming out of the back of the head and running down the back of the block. The odd thing is there's no oil in it, and no coolant in my oil (which obviously is a good thing), but I don't want it to get to that point of it is getting worse. Heat works fine, and it isn't overheating, only losing maybe a gallon a month. At some point the ford gold stuff was flushed and it has the compatible green, that is the only thing I can tell is not stock. I don't want to tear it down if I don't absolutely have to.
View 7 Replies
About a week ago I began smelling coolant after driving my 2012 F350 6.7. Yesterday I noticed a small amount of coolant on the ground and decided to take it to the dealer. As soon as I told the Service Manager what was going on he said......"You need to leave it......there is no doubt in my mind it needs a radiator". They pressure tested and and sure enough it does. He said they are replacing about 2-3 a month but there is no recall.
Here is where it gets fun. Apparently radiators fall off at 36,000 miles and are not included in the 100,000 Power Train Warranty. It gets better. The Radiator is on national back order for 5-6 weeks.
View 14 Replies
I have a 2006 f250 6.0l diesel. I just replaced the egr valve plus egr cooler and I was going to flush the coolant. I was filling the truck with distilled water to do the flush when I noticed a leak under the truck. When looked to see where it was coming from it looks like it's coming from where the cylinder head meets the block on both sides in the back by the transmission. Is this a sign that the head gaskets are shot or did I forgot to tighten a hose or something stupid like that?
View 2 Replies
03 f350 5.4. Very minor coolant leak at the moment. Valley behind water pump looks a little damp and leak has shown a little on the passenger side block above the starter. Shows on the tranny bell housing and hits the y pipe every once and a while. I am thinking its the hose that runs under the intake manifold but wanted to check in here for some wisdom. Can it be bypassed or rerun without pulling everything.
View 12 Replies
The truck starts up fine. then after a minute or so it starts to spit and sputter and back fire through the intake then dies.
What could cause this? Intake manifold gasket leak?
Will a clogged fuel filter cause this?
5.4 ....
View 14 Replies
I have a 2006 Ford F-250 coolant leak only when the truck is cold. Ive noticed it in the morning when I leaving for work. It looked liked it was coming from the passenger side yesterday and today it's on the drivers side when I'm sure is because my driveway has a small tilt to it I've looked everywhere I could under the hood and don't see it leaking.
I don't have any temp problems or white smoke and my coolant level has changed that much and for a few days the drip stopped now it's back. I tried to search for the answer but can't find it. I'm just wanted to make sure it's not the head gasket but I'm sure I would have a sign it it was. I will include where I saw it dripping from. It's parked on flat ground here ... That's where I saw a drip coming from driver side ....
View 7 Replies
I trying to see if this is something that is a easy fix or mayor work. Leak coming from that metal housing behind alternator. Does this housing came off? or do I need to take out the intake out? .
View 8 Replies
I have a leak from the oil pan gasket and oil coolant lines. From the research I have done, it looks like I have to lift the motor to change the oil pan gasket. Any way to get this done without lifting the motor??? 2000 f250 5.4 2wd....
View 4 Replies
I'm trying to troubleshoot a leak on my 08' F250 with a 6.4 powerstroke. It's been dripping coolant when cold pretty aggressively. Once the truck heats up, the coolant leak seems to mostly go away.
Here's a picture of the drip, it's marked by a dart, so you can see the location from the top (second pic). The radiator house connection around the engine seems dry.
Pic from Top ....
What's hidden here that could be causing the leak?
View 1 Replies
