Ford Super Duty (1999-2016) :: Turbo Seals - Oil Seeping Out Around Boots?
Jul 13, 2015
Why am I getting oil seeping out around these boots? Is my turbo seals going bad?
View 3 Replies
Jul 13, 2015
Advertisement
Ford Super Duty (1999-2016) :: 2003 - Changing Plugs / Boots - Grease And Water In C-O-P?
OK changing plugs and boots on 2003 f 350 5.4 (I have a bad miss and mis-fire code) First time messing with these things. When taking out the coil over plugs it looks like somebody put die-elect grease up underneath the boot at the top where the spring and the metal prong touches together. I thought I just needed only to grease the plug on the sides to keep the boot from sort of melting onto the plug. And some boots had maybe a drop of water in them is this common or any concern? Might be condensation and water does conduct elec, so not that concerned, but these C-O-P's are new to me and thought I'd ask. I've searched here and read posts about changing of the plugs and C-O-P's but don't remember any water boot coming up.
View 6 RepliesFord Super Duty (1999-2016) :: Vibration / Pinion Seals Leaking
Well, I am getting a vibration In 4x4 99 f250 sd, pinion seals leaking and it has a little bit of movement. I have done a pinion bearing in a crown vic I had before. But not a dana 50. What am I in for, I searched but couldn't find a step by step , how long does it take a back yard guy.
View 2 RepliesFord Super Duty (1999-2016) :: Frozen Door Seals Constantly?
Any good remedy for constantly freezing door seals? I have a 06 extended cab and the rubber seal between the 2 doors makes an excellent "lock" when water freezes and all but welds the doors together. I damn near broke the paddle handle trying to pull on it. I wasn't keen on dumping water on the top of the seal since the glass is so cold and the water doesn't seem to penetrate anyway. I was thinking of wiping the seals heavily with anti-freeze? or motor oil? No, a garage is not an option.
View 2 RepliesFord Super Duty (1999-2016) :: Changing Oil Seals On Front End - Backlash Setting
I'm in the process of changing oil seals on my dually front end. Do I need to worry about backlash settings? I see the gears are attached with solid brackets, which I assume, as just torque to spec and not worry about backlash. What is the torque spec for the four bolts holding the gears/yoke in place?
View 2 RepliesFord Super Duty (1999-2016) :: 2003 - Squeak Coming From Front Axle Seals
I have a 03 super duty 3/4 with 45000 miles. I have squeaking sound coming from the front end. My local ford dealer says ford has been replacing those front axle seals but the noise comes back.They said the fix is to keep a dab of grease on them of which I.m doing.That does take care of it for awhile but the squeaking does come back until I put a dab of grease back on them.
View 14 RepliesFord Super Duty (1999-2016) :: Rear Power Sliding Window Seals Replacement
My 2006 F350 has a nasty air leak/whistle coming from the rear power sliding window, unfortunately I found the one of the vertical seals laying in the cab. Looking for some insight on if there is a replacement seal kit, where I can find one and how difficult is it to install?
View 2 RepliesFord Super Duty (1999-2016) :: 2008 - Front DS Wheel Binding When Turning And Loose Seals?
I have a 2008 F-450 Lariat 6.4 4x4. I recently started noticing the front driver side wheel (best I can tell) wheel makes a noise as though it's binding uo when turning either direction, and I can feel it as well. 4wd is not activated and the hubs are in auto. When the front end is off the ground, I rotated the wheels and they spun independently unless the hubs were locked. I noticed what appear to be seals on both the driver and passenger side hanging loose (see pics). What this might be? I recently used the 4wd when we visited White Sands National Monument while pulling a 5th wheel RV.
View 9 RepliesFord Super Duty (1999-2016) :: Replacement Turbo For 7.3L?
After 225,000 miles, my turbo appears to have failed -- not spinning. This is a stock turbo that is unaltered. Yes, I change my oil and filter every 3000 miles.
My question is; what is a reliable after-market replacement part that will bolt up?
Ford Super Duty (1999-2016) :: 2006 - No Turbo At Idle
I have a 2006 6.0, edge programmer, and egr delete. I had the hpop replaced back in July. I have a straight piped exhaust system as well. I have always noticed a loud whistle at idle from the turbo but yesterday when I started it there was not whistle at all. When I drove it it would still build boost but not like it used to. I have to really get on the throttle to build boost like it should. Is it my turbo going bad?
View 2 RepliesFord Super Duty (1999-2016) :: Turbo Is Making Noise
I have a 2003 6.0l did a rebuild on it. Got it all back together runs ok, but the turbo is making noise. I can unplug the actuator and the noise stops. How can I check the actuator. now the noise is of course when it is running.. but unplugged the noise stops.
View 2 RepliesFord Super Duty (1999-2016) :: Oil Leak Around Top Of Engine Near Turbo
A friend has a 2000 Super Duty 7.3L Diesel Power Stroke. 300,000 miles and having an oil leak around top of engine near turbo. It's losing oil at a rate of half a quart every two days. Driver says that engine lacks power. Is it time to replace turbo? What else should I look for concerning the oil leak. Also, what else should be replaced/inspected while replacing turbo?
View 2 RepliesFord Super Duty (1999-2016) :: 2006 - Won't Build Turbo Pressure?
Got a 2006 6.0 won't build turbo pressure had to previous codes a p0098 and a p0405 I replaced the egr valve and the mafs codes went away but still no boost
View 9 RepliesFord Super Duty (1999-2016) :: F250 - Whistling Turbo Under Load
Just bought a 1999 7.3 f250 w/71000 miles and took it to a diesel guy and under load he said that the whistling was normal..is this correct?
View 3 RepliesFord Super Duty (1999-2016) :: 2005 - Windshield Fluid Turbo Injection?
I have a 2005 6.0 with 279k running pretty strong. I met a mechanic that has the same year truck with 700K!! He showed me one of his mods and he used a longer line on his windshield wiper fluid and put a Tee Connector on the line and ran it into his intake for the turbo. He said he will use it when cruising along sparingly but it cleans his turbo and such. Is this a water injection hack?
View 6 RepliesFord Super Duty (1999-2016) :: 2000 F250 - Smoke Will Come From The Turbo After Driving For A While
I have a 2000 f250 7.3 powerstroke. I bought the truck with 218000 miles on it, I have only put 1000 on it. I have had some issues with. The cps went out of it, and it wouldn't start until u replaced it. I have a Ts chip on it and cold air intake. It will not start after a cold night, it starts fine if I plug it in. It also lopes, or misses no matter the temperature outside. Also, it will blow a steady flame when you get on it. Finally, it also gets hot, smoke will come from the turbo after driving it for a while, no matter how you drive it.
View 2 RepliesFord Super Duty (1999-2016) :: Turbo Go To 40 PSI Or Stay In Middle At 20 Under Full Acceleration
6.7 Boost ... Under full acceleration does the turbo go to 40 PSI or stay in the middle at 20?
View 4 RepliesFord Super Duty (1999-2016) :: Gauge Levels For 2003 SD Twin Turbo F250?
Just bought a watchdog monitor by Bullydog. What are the normal levels for Boost, MAF, Load for a SD Twin Turbo 6.0L?
View 7 RepliesFord Super Duty (1999-2016) :: 2011 - Turbo Exhaust Leak - Smell In Cabin
I have been smelling raw exhaust in the cab, especially when the weather is colder and when standing still.
I took it to the dealer and in the process of fixing minor coolant and oil leaks on the turbo, they located a small exhaust leak with visible soot on the back side of the turbo.
They tell me that there is no way to repair it and that only Ford can rebuild or repair these turbos.
2011 SD 6.7
Ford Super Duty (1999-2016) :: 2008 F350 - Loss Of Turbo Suddenly At High PSI
Bought a 08 F350 with the 6.4 Liter, with 80k mikes on it. Was traveling up an incline. Both Turbo's were engaged, when suddenly I lost boost, and PSI dropped all the way down. They barely create any pressure now. Checked intake, also checked boots too inter cooler. All seem fine. After driving it for about five minutes at low PSI, a check engine light came on. It was a sudden loss of power.
View 13 RepliesFord Super Duty (1999-2016) :: Rebuilding Turbo - Screeching Noise At Start - Shut Down
I recently pulled the stock tp38 off. The reason for rebuilding is the turbo started making an awful screeching on start up and shutdown when the compressor is at a low rpm and starts to wobble.
The shaft has 1/2 in and out play with 1/8 in every direction. the compressor has some wear marks but no chips, the turbine has some good chunks missing. from what i can see there are no marks on the housings.
What should i put in it as far as new compressor and turbine/shaft. nothing that requires machining. I am not looking to run more boost or anything, just looking to reduce spool up time if possible. Any specific rebuild kit? what turbine and compressor should I go with?