Ford Super Duty (1999-2016) :: Squeak In The Rear Interior
Feb 27, 2015
I have a 2008 F-450 with the King Ranch interior. Every time I hit a bump in the road, I hear a squeak in the back. It sounds like it coming from the pillar behind the door, but I can't seem to find anything that is loose or would cause this noise. I hear nothing when the window is open (from outside the cab), so I don't think it is a body mount or anything.
I've seen posts on this saying it is the back seat and I've completely taken mine out and checked every bolt and made sure it isn't rubbing on anything.
This is the 3rd crew cab truck i've had and my 2005 made the same sound, though not as frequently. My 99 also made the same sound, again not as frequent as this truck. This truck does it all the time when empty, but seems to do it a little less when loaded down, probably because the suspension is absorbing more of the bump. I can't believe this is isolated to my trucks and I am wondering to identify this noise.
View 8 Replies
Advertisement
I've got a 2006 F250 5.4l Super Cab. When I bought the truck the rear interior door trim panels were missing. I tried to order them straight from ford but it turns out they no longer carry them, and I can't seem to find them anywhere online. I've also looked at the salvage yards in my area- nothing. Where I would be able to find these elusive creatures?
View 3 Replies
Have my truck in signature making a very high pitched, annoying squeak from the front end. I believe it is coming from the right side because i just took the wheel off and it has a coating of brake dust on it (the 3 other wheels are clean). Only makes the noise when turning right at speed, and goes away when i straight it out or hit the brakes. I am not very good with brakes or the front end parts.. what could be causing this noise? Could the slide pins be frozen? i know that is a problem with these trucks... but not sure if these are the symptoms.
View 14 Replies
I have a 2002 f250 super duty v10 with the manual transmission... It has aloud squeak from under the truck when Im slowing down or maintaining a certain speed. The squeak goes away when I accelerate or if I push the clutch in. It does have a vibration to it when im speeding up. And shakes bad sometimes when I let off the clutch from a stop..
View 1 Replies
I just recently purchased a 06 250 crew and I don't have any interior lights except for the map lights. Nothing that I do makes the lights come on. There is no fuses being shown for the lights either. I pulled the drivers side door panel off and there isn't any wiring for a socket to work in the panel. Am I missing something? All the searches that I have done aren't telling me much.
View 8 Replies
Have a 2012 350 cclb 4x4 6.7 lariat, interior lights don't work. Not with any door open, Not with switch. map lights work. We've checked every fuse in cab and under hood. What to check now ?
View 8 Replies
I replaced my alt. because in the morning the bearing would squeak and the head lights flicker. It was a life time alt. Put the new one in now it wont charge. Took it back and got another, same thing. Also replaced the starter relay and battery. I checked the fusible links and replaced a terminal connector. The wires look good. There is 12v on the alt lug and pins 1 and 3 on the connector with the key off. Turn key on and 12v disappears form pins 1 & 3. Also checked all fuses in both boxes. I ohmed out the wire harness from the alt back to the connectors, all good. What am I missing? This is a 99 f530 5.4l.
View 9 Replies
I've noticed lately when I turn the steering wheel slowly I get a slight creaking sound from somewhere behind the wheel. What is causing it and if it's worth tearing it apart to fix it. I only notice the noise when the radio is off and turning the wheel while sitting still.
View 9 Replies
I have a 03 super duty 3/4 with 45000 miles. I have squeaking sound coming from the front end. My local ford dealer says ford has been replacing those front axle seals but the noise comes back.They said the fix is to keep a dab of grease on them of which I.m doing.That does take care of it for awhile but the squeaking does come back until I put a dab of grease back on them.
View 14 Replies
My rear wheel bearing are a little loose. This afternoon while diagnosing a squeak in the back I found this. While pushing the truck side to side there is a clunk and when you lay your hand on the tire you can feel it, bearings are loose. Nothing during the operation of the truck to give this away, truck runs and drives as it should but I need to check it our before something does go wrong. What I'm looking for is a torque / preload that the rear wheel bearings need to be set at.
View 2 Replies
My prob started with key in ignition warning alarm working with no key, then radio on off at will and interior light not working or delay not turning them off when door closed. Now all gauges and warning lights/alarms go out also. If I open door and key alarm is on all systems work at that moment and without touching truck alarm can stop at will, at that point ignition alarm, interior light, radio and gauges do not work. When I giggle key with truck running the door ajar alarm activates when system working!
View 4 Replies
Purchased a new 2016 F250 Diesel. When you shut the truck off or open any door while the vehicle is parked, the interior, markers, and bed lights all come on. I know it is suppose to be a convenience but to me it is a pain. And to make matters worst, they remain on for a short period of time after you leave the truck and close the door. Sometimes you don't want the lights to come on, like when you shut the truck off and are waiting to pickup someone. Any solution for this problem, short of removing the bulbs, or reprograming the computer?
View 13 Replies
I'm not just reposting it though. I went ahead and sprayed all of the door switches with WD-40 multiple times, and the interior cab lights still come on. So, I'm assuming one of the switches in the doors is bad. Only thing is, I don't know how to figure out which door has a bad switch. Any way I could check this? Or it may be something other than a bad switch. It's annoying not having any interior lights (I took them all out to keep the battery from running down).
View 6 Replies
I have a 2006 F250 6.0L Crew Cab 4x4 that started acting up. It started two days ago when I noticed my windshield wipers were only working at one speed. Then today my wife took the truck to work and she said the radio stopped working on her way to work. Then she gets in this afternoon and the ABS light is on, the A/C isn't working, the windows are super slow and the interior lights are flickering. She isn't home yet so I haven't checked the fuse block. Where would you start looking?
View 3 Replies
I have a 2012 F250 and am having a problem where the interior lights wont come on with the dash switch or when the doors are opened. I have confirmed that it is not a bad fuse, also the lights will come on when the switch on the individual lights is manually pushed, but not automatically like they are supposed to. I dont see it being a door switch issue because the door chime comes on and the stereo goes off when the doors are opened after turning the ignition switch off. I've read that the dealerships will switch out the BCM. I thought maybe the dimmer switch next to the headlight switch but there is no power to it whatsoever, which also I can't dim the instrument panel lights. What did you do to resolve?
View 1 Replies
Dome light stays on drive over 15 mph lights turn off back up camera works when lights off lights on no back up camera 1999 f350 super dutuy
View 1 Replies
Just got a 2001 F-250 Super Duty (crew cab, long bed, 4x4, 7.3L turbo diesel) and have been going through and fixing a lot of little issues. The one that now has me stumped is the interior lighting circuit (which is also the bed light). Here's what I've got so far:
Map/reading lights work, but dome lights do not (neither automatically nor when turning them on via the dimmer switch). Verified all fuses in the PDC as well as the interior fuse panel (behind the driver side knee panel). The interior lighting relay was missing, so I purchased and installed it.
Relay #1 (interior lighting), fuse #4, and fuse #14 are all good - when I pull the fuse with the door open, the relay clicks (and clicks again upon reinstalling the fuse). With the doors closed, the relay clicks when activating the interior lights via the dimmer switch.
The LT GRN/YEL wire is hot, and all related accessories work (map lights, engine bay light, etc).
The BLK/LT BLU wire is not receiving power from the relay from what I can tell.
Before I start trying to pull out the fuse panel to start checking connectivity, anything else to check? The ground at the rear driver corner of the cab is good, and a visual check of the harness running down the driver side of the cab has no visible signs of damage.
Also, given that the relay is audibly actuating the way it should, I'm guessing that the GEM can be ruled out as a possible cause? My next step will be to get a pinout diagram for the relay and crimp a quick jumper to see whether or not it's simply a defective relay... But I doubt it's the case.
View 6 Replies
I have a 2014 4WD Super Duty. It has a squeak that is coming from the drive shaft area. I had someone listen to it as I drove slowly next to them. It is a repetitive: squeak squeak squeak squeak squeak. Not loud. The frequency increases as speed increases. I could believe it may be a U joint based on the frequency, but seems hard to believe with a new truck. I heard this sound when I first got it, but the sound was so slight that I thought it was just some sound associated with a newer engine. But now it is becoming a bit louder.
View 4 Replies
I have a 2008 F250 XLT. When i am driving and turn the wheel a squeak is noticeable while the tire is spinning. as i speed up the squeak gets faster and slower when i slow down. I have it narrowed down to the right front tire but cant figure out what is causing it.
View 5 Replies
I have a 2003 F250 Ext Cab 158" wheel base, 5.4, auto. 2wd
Last week I noticed a squeak squeak squeak while driving through town, sounded like the u-joint. I got home, jacked it up and pulled the rear shaft. Unfortunately I, bone-headedly, did not mark it when I pulled it. I took it into town and had a shop put in two new U-joints from autozone.
I got home and, forgetting to mark it, put the driveshaft in 180 degrees out. This caused the whole assembly to get out of balance and tear up the carrier bearing.
I replaced everything, pulled the complete shaft and disassembled it to put the new carrier on it...again, for some reason I didn't mark it. I knew I was supposed to.
It destroyed the carrier bearing again. So I limped it to my mechanic the next morning. He went through and replaced the front u-joint and carrier and called it good. I picked it up that afternoon and it was vibrating again.
I took it back and they kept it overnight and fixed it again. The problem they had was the driveshaft was coming back on the 'flex' and rubbing into the carrier instead of sliding back and forth, it was sticking.
They got that all fixed up and the wife picked up the truck while I was at work Friday. I called her at lunch and she said it was still squeaking like before I took it to the shop. I get home that evening and drive it and, sure enough, it's squeaking like it has a bad u-joint.
But the squeak didn't start right away, I had to drive it about 5 miles for it to start, and then I didn't hear it until I slowed down enough to get rid of the wind noise.
I took it back to the mechanic this morning. He called me around 4 and said they drove it about 25 miles around town and on the highway and couldn't duplicate the noise.
He said they went ahead and hit the grease zirks on all 3 u joints(even the ones they didn't install on the rear shaft) and they couldn't hear any squeaks. So I pick it up, drive through town a bit and start heading home. No squeaks.
I get about 20 miles out of town and slow down going over a bridge with the windows down, and there is the squeak again. Still sounds like a bad u-joint. But I didn't hear it until I drove it about 25 or 30 miles. What this noise is or what I need to be looking for?
View 1 Replies
09 F350 with 50,000 miles, just starting to hear a mild squeak from front drivers side hub I believe. Can hear it while in 4 wheel drive, my thoughts is that the original universal in the hub is beginning to give up. My question is how long would you think I have before I need to get this done? Would this be a warranty item? I am not sure anymore.
View 2 Replies
