Ford Super Duty (1999-2016) :: Slight Wobble After Hitting A Bump In The Road
Jul 19, 2014
I purchased the truck from a used car lot about 3 months ago and after driving for a few thousand miles I am feeling a slight wobble after hitting a bump in the road. Here is my truck set up:
- 2011 Ford Lariat F250 4X4 FX4 6.7 ltr
- 67400 miles
- Tires stock and great tread
- Rancho steering stabilizer kit
- Rancho Shocks
- Rear air bags
It does appear one of the rancho stabilizer dampers is leaking slightly. Why would the previous owner install a rancho stabilizer kit? Is it because of the rear air bags?
View 14 Replies
Advertisement
I put new ball joints on a few months ago and now the truck is starting the death wobbles felling even around slight bends in the road.I jacked it up and the passenger side tire will move 1" side to side scarey.Not sure what I need to replace.
View 9 Replies
I have an 09 F350 (116,000 miles) that I have only owned for about 3 months. I got it pretty cheap but it did have a front end issue. Drives fine most of the time but hit a bump just wrong at highway speed and it goes into a shake and wobble that feels like you just blew a front tire. Took it into my shop, not the dealer and was told I pretty much need a front end rebuild. Kinda what I figured I would hear.
View 4 Replies
Got the death wobble, had everything replaced. Wobble was worse, upgraded track bar. Then no wobble but bad bump steer. Put on new OEM track bar.
Ok but still if I hit a hole on the interstate I get death wobble and little mini wobbles on any bump. What is the permanent fix for this other than selling the truck?
2011 6.7L FWD Lariat, upgraded exhaust and Def removed.
View 4 Replies
2000 F350. 4x4, V10. 153,xxx miles. Here's the story. Whenever I hit a little bump in the road, I get a vibration directly under my feet and in the gas pedal, NOT in the steering. It will go away pretty quick or when I hit another bump. It only happens when the front driveshaft is not spinning. Hubs locked in in 2WD, it doesn't vibrate. Hubs unlocked and in 4x4 High it doesn't vibrate.
View 8 Replies
So I have 1976 f100. For the last few months I have been dealing with the famous death wobble of solid axle trucks. It seems to randomly appear at speeds over 45mph or after hitting a speed bump or cattle guard. I have tried several things like replace all the bushings in the front. Ive looked for any bars with play and fixed them right away. And I even replaced the ball joints thinking it would work. I actually let another mechanic to solve the problem, I was fine for about 3 days. I am running out of parts to check and its hard to drive it down the road.
View 1 Replies
I'm getting a nasty wobble from about 45mph - 60mph. I'm guessing it's time to start replacing front end components. So far, the only thing I've ever replaced in the front end are the sway bar bushings. I have a new steering gear / box to install; I plan to replace wheel bearings, ball joints and tie rod ends. Is there anything else I should replace while I'm in there?
1999 F350 4x4 7.3L auto trans, 150,000 miles....
View 4 Replies
I have noticed a serious bump steer or a violent jerking action when hitting a bump in the road. Just over a year ago I replaced ball joints,tie rods, sway bar links (2nd set since cutting off original). I used MOOG components. I was shocked to see the sway bar links loose once again. Is there a certain way to tighten them or is there a better product available. Mostly stock 1999 'ploder with fire wires and scremin demon coil pack.
View 3 Replies
I recently bought some used rockstar 1s off a buddy, installed new tires, balanced, put tapered lug nuts on and I'm still getting a slight vibration above 40mph. Do I need hub centric rings? XD says no, I think I do.
View 2 Replies
My truck has developed a wobble in the steering wheel. I don't mean when you are driving down the road, but the steering wheel wobbles around. It wobbles in any position that the Till shaft is set to. How to repair.
View 10 Replies
Ive had this 2009 F250 4x4 Super Crew, 6.4 for 2 years now. Bought it the way it sits with a 6" ProComp lift and 37" Yokohama Open Countrys. Recently, once I get up to 40-45 mph, the rear end starts vibrating violently until I speed up or slow down. There isn't any clanking noise and it's silent. I look in the mirrors to see if it's the tires but they appear to be rotating smoothly. It's never done this before. It's like a tire is out of balance but it shakes much harder than that should be at that speed. It rides smooth as can be at any other speed all the way up to 80 mph which is the faster than i drive. What this could be? I've done searches but can only find info on the front end death wobble which is not the case here.
View 4 Replies
So I've got a 2000 F350 7.3. Just replaced all the ball joints, sway bar end links, carrier bearing, balanced the tires... a bunch of stuff to try and eradicate this weird wobble I have and I just can't seem to figure out what it is.
The wobble happens at and around 35mph, and then once I break 70mpis on the speedo (I have a 4" lift and am running 35's so it's not actually 70). I've experienced death wobble before in a jeep I had, and it is nothing like that, and I can't see it being driveline related but I could be wrong.
View 1 Replies
It seems that my 2010 F250 truck has come down with the dreaded death wobble. My truck is stock and has 63k miles. I was driving home today on a 2 lane side road and hit a few bumps that almost put me into the oncoming traffic. That sure did get my attention! I've been ready a lot on this site and wanted some opinions if replacing the stock steering stabilizer would fix my problem.
View 14 Replies
1999 F-350 7.3 Dually 2wd Front End issues. I think I may have several things going on so here goes. Truck has about 130,000 miles on it . Bought it with 60,000 miles in 2009.
It's always worn the front tires weird but it's gotten a lot worse and it's happening in about 10-15 thousand miles now. It's wearing the tires on both sidewalls like under-inflation but I run 70 lbs in them. I've noticed for several years now that it makes a knocking sound and I feel it in the floorboard, shakes in the steering wheel when I turn to the left only in a corner at speed. (65-70) ...
Now it's started intermittently going into the death wobble at slow speeds like the caster is to negative on it. I'm sure it could use some shocks but I just rotated the tires and I felt no play anywhere. I know when we used to get that bumping in the floor board on older Fords it was a bad radius arm bushing but that couldn't be all of what's going on here. I've done searches on this and it has happened to others but I haven't found a resolution from any yet.
View 2 Replies
Brake issues on 2005 F250. About 3 years ago during vehicle inspection the garage stated I need all for rotors on my F250. I had @40,000 miles at the time. Garage said rotors are a onetime use, no recutting them. So I got all new rotors. Prior to then I never even felt a wobble indicating they were warped. Anyhow now with 15,000 miles on them I have a huge wobble when I get on the brakes and it's 5x pronounced when pulling a trailer. I assume more warped rotors. If so, why? I pull a camper or car trailer maybe 7-10 times a year.
Now currently I am assuming its warped rotors because I have not had it "professionally" checked. I did have one occasion last August pulling the camper where I smelled the brakes being hot. The pedal got soft. After cooling it seemed ok and I flushed the old fluid and put in new. I have about 4100 miles since then and the warped feel just started about a month ago. I hate the thought of new rotors as I paid for new Ford rotors 3 years ago. Didn't want the Chinese crap from the box stores. I can't imagine how these would warp this bad after less than 15,000 miles, they are massive. Why they would so quickly?
View 14 Replies
My 05 F20 CC LB 6.0 4WD has the alternator light on for a few miles then goes out also sometimes goes away when you accelerate hard, is my alternator going, or is this some common glitch in the light hopefully?? Also every once in a while got the death wobble, installed tie rod ends and center link, but if I hit a bump just right it does it.
View 2 Replies
Got a POP noise when I hit the brakes. I have to apply some pressure for it to make the sound. Does it once when going forward. Doesn't do it again until I drive a few minutes, then it does it again.
If I go back and forth between reverse and drive, it does it every time as I hit the brakes, but only once until reversing direction again.
Takes some moderate pedal pressure to make the noise. If I turn the steering wheel to either side, it doesn't make the noise.
I've gone over the brakes, nothing there is wrong, and besides it wouldn't go away when I turn the wheel. Nothing is loose in terms of tie-rod ends, wheel bearings, nothing.
It's not bad enough yet to be able to see movement in the ball joints when the wheels are off the ground. Is this the ball joints?
View 14 Replies
Had the death wobble a couple of months ago. Changed all shocks, steering stabilizer to bilsteins; new tires (stock), ready lift stabilizer(stock, no lift) had it digitally aligned. All was perfect. Until my new intermittent steering issues. It appears to happen when making a 90 degree turn, say a right or left onto a perpendicular roadway. As truck straightens out, you'd think the front drivers side wheel is going to fall off(you'd think the lugs are missing).
Pull int a parking lot, drive in a few circles, and all back to normal. Can't replicate every time, force for s few days with no issues, then it might happen again. Other intermittent issue is sometimes, again out of no where, truck will pull and track to the right or left. Pull the steering wheel the opposite direction, it'll track the other way. Again, pull int parking lot, do a few figure eight circles and back to normal. Alignment shop and regular mechanic say everything is tight, ball joint look fine.
View 3 Replies
I had something happened the other day that I have never experienced in any of my Prius' before, I was driving along coming up to a stop lite and the lite changed I tried to make a quick stop and stomped on the brake pedal and pedal got real hard and no stopping! car did not even slow down, luckily no cars where sitting at lite.
View 12 Replies
Everytime I hit the slightest bump I here knocking, tapping or clunking coming from my front suspension what could it be.
View 6 Replies
I noticed today my ranch hand bumped is hitting my fenders, when I originally installed it there was about a 1/2" gap.
All the bolts are tight, however it appears the mount that's attached to the frame is flexing and becoming weak as I can grab the bumper and rock it when it used to be rock solid.
Is there anything I can buy that will reinforce the bumper mounts that are connected to the frame to support this bumper???
Right now it's bolted up with 4 bolts on each side and no additional hardware.
View 3 Replies
