The top mounting point on my seatbelt is squeaking like crazy. The guide for the seat belt is rubbing on the piece it bolts to because the plastic tabs on the plastic cover have worn out. Where to get a new one of these? Its just the plastic triangle shaped cover that goes over the seatbelt mount.
View 1 RepliesMy "new" truck has a sluggish seatbelt on the driver's side. It won't retract all the way.
How do I get to the mechanism to have a look at it or put in a replacement?
The belt on this one comes out of the top of the seat, not from against the door.
How to disable the belt minder chime on a 2015 SD? I tried unplugging the harness under the seat, but it turns on the airbag light. No instructions in the owner's manual like there was for my 2005.
View 8 RepliesDoor chime /seat belt or key chime comes on random and frequently while driving. With seat belt attached. Bushings in shift handle are worn out. Could this be the culprit? I'd kind of prefer to fix the problem before I disconnect the chime...
View 1 RepliesI have a 2005 F250 King Ranch 4X4 Diesel and now experiencing an issue with the front seat belts
The problem is while being worn sometimes they will not let you lean forward- they act like you have a foot on the brake pedal and are locked-you have to lean back and forth several times to get them to let out if reaching for something on the dash etc..
I have searched the forum and found many issues where the seat belts stopped retracting- but my issue seems to be unique in that the seat belt will at times 'Not Let Out" when you lean forward.
2001 F250. My drivers side seat belt buckle randomly releases and it's getting worse. Any sources on a new one or used even. Also, what other vehicles may have the same part number if I go used.
View 10 RepliesI need an expert. 2007 Ford F-350 King Ranch and tonight, the wife and I were coming home from friends house and I tried to buckle my seat belt. The receiver would not click and hold the seat belt. Cannot find the replacement. What should I do?
View 13 Replies2006 6.0l ... I've read all over for tips on routing this belt and everyone plays it off as being some simple '20-minute' task. I'm on my 4th hour on this now.
I can't figure out how to route the belt around the tensioner pulley, circled in the picture (from another thread). Everyone glosses over how to do this and I can't figure it out.
It seems like the only way to get it on is to bend the belt and slide it between the pulley and the block, but that I just can't reach the blasted thing.
Replaced my old sagging leaf springs with new X code springs. Had an almost impossible time centering the axle even with adjustable center link. Even with it totally maxed out it is just barely centered. Now I have a terrible squeak coming from springs. Is this because of the side loading of springs? Is there any fix for it? Not only do they squeak but the drivers side now sags almost an inch even with brand new springs. 2002 F350. Super annoying and irritating
View 1 RepliesI recently replaced all of my brake pads with yellow stuff and they seem to be squeaking a lot. I also noticed when I am driving and I stop and let off of the brakes they don't release immediately so could it be this is the cause of the squeaks or do these brake pads just squeak like crazy? I read somewhere it could possibly be the brake lines but I don't see how this could be the cause for so much squeaking.
My truck is a 2011 F 250 diesel crew cab....
I posted a reply her a couple of weeks ago on how I fixed my '03 SD's squeaky doors. I went to AutoZone and bought 32 feet of 5/8 inch self-adhesive rubber (not foam) weatherstripping and mounted it around the outside edges of both doors, starting at the top. Presto - squeaks are gone, there are no more drafts and road noise is reduced a little. (I may remove the stripping I put on the side edges of the doors because I think the culprit is actually the rigid polyethylene bumper strip they've mounted on the upper door jam).
View 2 RepliesI have a 2016 F250 6.2 XLT CC 4X4 that is mostly stock, except I did put on 18x9 wheels and LT275/70/18 Cooper ST MAXX tires. I have noticed recently on hwy driving and even in town driving, that the passenger seat rattles/vibrates quite loudly. Obviously if there is someone setting in the seat, it is just fine.
Is this a common issue? Is there a quick fix (tightening a couple bolts or replacing a couple clips?) Or should I take this back to the dealer for warranty?
I have an '08 F250 w/ a 6.4. A couple days ago I started getting a loud squeaking when I turn to the right. It only does it under speed, almost like it needs the weight transfer to make the sound. In addition it's only when I turn at a like 45 deg angle, I can turn less or more to make it stop. But it has gotten louder and louder.
View 1 RepliesSo, don't know if this is normal or not, but after lifting the rig, I'm experiencing a whole lot of these types of sounds from the leafs or the springs or whatever, whenever I start, stop, or turn. Is there an easy way to silence the noise? I've tried all sorts of lubricants on the leafs and springs, but I only get (at best) a week of muted noises. While it's only an inconvenience, it sure would be nice to have the rig be quiet again.
View 6 RepliesIs there a way to grease the steering shaft or whatever is making the squeaking sound inside the cab when I turn the wheel? It's a 2001 F250 CCSB Lariat and it drives me crazy hearing sounds I shouldn't be hearing. This is certainly not coming from outside the cab but rather in the steering shaft within the cab somewhere. How I can lube that up?
View 1 Replies03 F250. 5.4 2v ... I purchased it a month ago.
Squeak under the hood. It appeared to squeak in relation to the movement of the tensioner......simple right? Replaced Tensioner and Belt..... Still squeaking.
AC not working at all. Compressor never kicking on.....replaced compressor, accumulator, and orifice tube. AC works now!.....squeak still there....
Notice fan wobbling.....shut truck off.....fan clutch shot... replaced....STILL SQUEAKING!!
Obvious answer....sound still on that side of the engine....Idler pulley....I just replaced it and the dang truck is still squeaking!!!!!!!!!
All that's left is the harmonic balancer, alternator, and power steering pump.......What could it be?
My heated seat that quit. Pass side heated seat on my 07 went out. The light on the button stays on, where do I start diagnosing to figure out if it is the back or bottom that went out?
View 4 RepliesSo today I was backing up my 11000# fifth wheel at the campground when at 1500-2000 rpm I hear this awful shrieking sound coming from under the hood. I heard it the whole time while backing up and under a load. I never heard it once going forward. So when I get home I put it in reverse and hold the brakes and again I hear this shrieking sound coming from under the hood I get it up to 1500 rpms or so not moving just holding it and the more throttle i apply the louder the shrieking gets.
Now remember the truck is not moving its just spooled up, holding the brakes. I think that maybe something is wrong with the turbo, but I dont want to jump to conclusions. This truck is a 2001 F350 SRW CC LB 7.3 161,000 2 owner miles, 4 inch turbo back FLO PRO Straight pipe, and gauges everything else stock. What is moving that is making this horrible sound.
we've had a bunch of snow this week and I've been driving around with my hubs locked in. today I noticed when I was slowing down to pull into my driveway I could hear a slight squeaking sound(sounded like a squeaky belt) coming from the front.
I verified it was coming from underneath the truck behind the engine compartment so I unlocked the hubs and went for a drive, the sound was gone. I crawled underneath and turned the front driveshaft by hand and I could hear a slight rubbing sound at the back of the pinion. The bearing doesn't have any play in and there are no leaks. What is going on? Could the bearing be starting to fail or could the rubber seal around the pinion have some grit in it causing the noise?
I've replaced the brakes that weren't in that bad of shape anyways and even replaced one of the rotors as it was under federal regulations. I've even put the brake squeak goop on the back of the pads and it keeps squeaking and squeaking and it's driving me insane. Am i missing something here? I don't here any other super duty's squeaking on the road.
View 1 RepliesJust bought my first 04 F250 super duty Xl...4x4 Ext Cab...need to get this bench seat out and buckets and console in!!! I hear this is easy swap but never done before, or believe anything is easy.
View 1 Replies