my rear bumper is pretty much eaten up, too.
How difficult is this to replace?
Good source for rear bumpers? Just something stock; don't need anything wild, crazy, lighted, etc.
It's a work/hunting/fishing/hauling truck. That's all.
While trying to remain positive regarding my current truck fiasco, I was thinking about future mods. I really like the way Dodge has the exhaust cut outs in the bumper and was wondering if anything like that exists for our trucks?
View 3 RepliesOk I have a 2001 f250 SD with 7.3 and my rear bumper is dented and badly and warped. The steel frame mounting part of it is straight and fine. I found a "kit" on eBay that has just the end caps and plastic top cap for a 2008+ style trucks. Would those caps and plastic fit on my frame mounted section (what the actual name for the part that the chrome bumper actually screws into that mounts it to frame) ?
View 1 RepliesAdding red/white reflective tape to the rear of superduty? Pros, cons, legal etc?
View 14 RepliesInstalling a back up camera and need to locate reverse lights on driver's side at rear bumper. What color wire is for the reverse lights on a 2003 F-350 (truck in my sig)?
View 4 RepliesMy rear fenders are pitting and bubbling with rust on both sides. I had my local body shop have at it and it looked good for about 6 months. Now bubbling up again. I see in older trucks like mine that this is a common problem. I'll probably have to replace rhr box if I really want to fix it? Or just learn to live with it.
View 14 RepliesI have a 99 F-250 superduty and my rear diff cover is pretty rotted and i need to replace it. I am on a college budget and i need a cheap one that will get the job done...
View 7 RepliesI'm gonna replace my front and rear brake pads. Any tips? Do I need to pull the rotor off and clean the axel? I've watched a couple of youtube videos but they leave me with a few answers. I have all the tools, what kinda lubricants will i need? Any recommendations? I hoping I can do a flawless job without and squealing...
View 13 RepliesMy 2006 F350 has a nasty air leak/whistle coming from the rear power sliding window, unfortunately I found the one of the vertical seals laying in the cab. Looking for some insight on if there is a replacement seal kit, where I can find one and how difficult is it to install?
View 2 RepliesThe rear hub outer oil seal on my 05 350 is leaking. The 350 Super Duty Twin Cab was never imported into the UAE so can I use the same seals as the Excursion or another Ford vehicle?
Failing that do we know the name and part number of a seal manufacturer whom I might be able to source from in Dubai? Ford don't make the seals them selves so there must be an alternate source for these things surely?
I am working on my Dads 01 super duty with a 5.4, automatic, and the pinion bearing has seized up due to a lack of fluid from a rusted out rear diff cover. The tag on the diff cover had a 10.5 stamped on it and has 12 bolts. Is this known as a ford 10.5"
I have changed gears and pinion bearings in a Dana 70 before is this the same process? What are part numbers for a new pinion bearing and seal? Gears are in fine shape.
Trying to replace sliding glass motor, quit working and had to cut the cable to shut it due to the rain. It appears I need to remove the seat belts & covers next.
View 4 Repliesso while replacing the rear brake lines in my 2001 F-250. / 5.4, the flex line that drops from the frame bolts to the axle through the axle breather threaded vent line. The friggin thing crumbled on me and now I can't find a replacement for it. Where I can get it or what it's actual name / part number is so I can call the Ford dealer and hope it's not obsoleted?
View 3 RepliesDo f150 bumper is the same as my 03 F250?
View 5 RepliesOn the 99-07 front bumper i would like to add driving lights in the bumper under the headlights something like the 11 up bumpers have...
Looking for a light and housing that possibly could be installed with out having to re chrome, so it could have a bezel to cover cut edge of bumper...
I bent my front bumper. Every time I look on amazon or ebay , when I put in my year, model, engine, it says their bumper won't fit. Mine has the 3 rectangular openings, 2 have the holes for mounting and tow hooks. It is chrome with the gray plastic or rubber bottom.Xlt. Also what part is the valance?
View 7 RepliesWill a bumper off a 2008 F350 fit on my 2006 F350?
View 7 RepliesI noticed today my ranch hand bumped is hitting my fenders, when I originally installed it there was about a 1/2" gap.
All the bolts are tight, however it appears the mount that's attached to the frame is flexing and becoming weak as I can grab the bumper and rock it when it used to be rock solid.
Is there anything I can buy that will reinforce the bumper mounts that are connected to the frame to support this bumper???
Right now it's bolted up with 4 bolts on each side and no additional hardware.
I got a 2014 F250 SD w/ 6.7 diesel. Since if owned the truck the front bumper has slowly started to sag at both driver and passenger side. Dealer says there is no adjustments for it.
View 14 RepliesDo a 2014 f350 front bumper will fit on a 2001 f350? Wanting to know if the bolt holes and body lines will match up? I put a 2014 rear bumper on and it bolted right up.
View 8 Repliesi've done some searching but haven't found any how-to's or instructions on how to remove the front bumper on my 06 f250. Any link on how to do it?
View 2 Replies