I would like to remove the tray located under the rear sit. I don't want anything installed back in place of it.I want the open space when the rear seats are folded up. I have two large dogs and they hate the tray. Will the rear sit ride okay if i remove the tray or will it loose some support?
View 8 RepliesI cant get my rear seat back to fold down anymore. I was on some very rough roads over the weekend and when I went to fold the seat back down the handle doesnt move. Is there a way to fold it without? Its almost like something is jammed which may be from the pounding the truck took over those roads.
View 3 RepliesI am upgrading an F150 w/ pass-through console to an F250 w/ jump seats. Have not gone to see the truck in person and am wondering where the rear air vents are located?
Reason being I have two very large dogs that own the back seat. It's basically a large dog bed. The console vents are fantastic, keeps them cool back there. I can't figure out where the vents are in a jump-seat configuration.
We have a 2013 F150 Lariat. When you raise the rear seat bottoms the entire floor board opens into a really large nice flat space. By removing the storage tub from my 2015 SD Lariat will that provide the same results as the F150 ?
View 5 RepliesI would like information how to remove the rear seat back on a 2012 F250. I want to remove the head rests and from what I can find out they are bolted solid to the rear panel. I asked the same question earlier and got a reply for 2011, would that be the same? Is there any place I could get a schematic, a picture is worth a thousand words.
View 5 RepliesMy 2001 F250 will not start (clicks). I verified its not the battery and even tried to jump start it. I have never replaced a starter- but before I do that I read where there is another solenoid under the hood somewhere. I always thought there was just the one on the starter itself.
Two questions:
1. where is that other solenoid located and should I replace that first?
2. How difficult is it to replace the starter? I am pretty handy.
The issue is that I cannot get it towed easily - I just need to get it started at least once since my plow is still installed and it's hooked up to a trailer..
I've got a 2014 f250 xl super cab and can't for the life of me figure out how to remove the back seat back.
View 2 RepliesI have seen plenty of the king ranch models that have the rear Captains chairs. My question is, I have a 03 Lariat Crew Cab w/ a bench seat, however, I would like to remove the bench and put 2 captains chairs in the back. Is this possible without lots of interior body modifications?
View 14 RepliesI like to keep my GPS in the tray on top of the dash, mounted on a sandbag-type mount. I want to hardwire the power (I already know how to do this at the fuse panel) but need to find a way to have the power cable through the tray. Any cool ideas other than drilling a hole and using a rubber grommet to clean up the pass through?
View 9 Repliesto removing the bed from my F250, there are 4 screws is that all ? and how heavy is the bed is it possible that four people can remove that ?
View 13 RepliesI have the Ford plastic drop in bed liner, and being up in the salt belt in CT, i want to take it out just to see how things look under there. Dont want to be surprised later on if i keep waiting. How do you take this thing out? Just pull the sides out from under the bed rails? You dont have to take the plastic trim that goes on top of the bed sides off do you?
Also, i want to get rid of this thing soon. The best thing to replace the plastic liner? i dont want to just leave it metal, but my dad has had a spray in "rhino liner" in his 04 ranger since the day he bought it and it has held up great. so i am thinking something along that line. How much it would be to have a spray in liner installed?
I heard today that, to remove the engine, the cab has to be raised?
View 13 RepliesI got a new headlamp switch for my 2016 SD. I have the XL work truck with no fog lights. I recently added fog lights and an OEM fog light wire harness. I also got an OEM switch that pulls out to activate the fig lights because the stock switch in my truck operates the headlamps only. What I can't figure out is how to remove the switch.
Here's a photo of the new switch .....
My truck has factory tint on all 4 corners as well as the rear window. I do quite a bit of night driving and I'd like to remove the tint on the drivers window as well as the passenger window. Is this even possible? I fear the glass was 'smoked' when manufactured and going back to completely clear glass will require a totally new window.
View 10 Replies2011 F250 with hood mounted windshield washer nozzle. How do I remove the nozzle? In a campground with basic tools.
View 6 RepliesRear-most connection before pumpkin, need to replace the U-Joint. I got the four bolts out at the flange but the shaft won't drop. I beat on the connection a bit, not enough to hurt though. What am I missing? How the heck do I get this apart and drop the shaft to replace the U-Joint???
View 9 RepliesI have a 2014 f250 with tailgate assist, How do I remove the tailgate from the truck?
View 14 RepliesWinter is around the corner and I would like to remove the chrome covers off of my 04 factory rims, the rims are rusting underneath the covers which is forcing my center caps to pop off randomly. Also I was going to get new winter tires so while they rims are off the tire i figured I would Paint them black to match better than the chrome. How to get them off easily? Also a good paint that wont chip easy when i paint them.
View 6 RepliesI have a 1999 F-250 super duty 7.3 4x4 and the rear drivers side axle seal is leaking. My question is how do I remove the axle shaft? my last truck a f150 had c clips in the diff that released the axle shaft but I did not see those on this truck. How to remove the axle shaft?
View 8 RepliesWhat size socket is used to remove a lug nut on a 2000 F350 4X4?
View 6 RepliesMy grandad passed away a few months back, and I'm about to get his truck ready to sell/trade for my grandmother. The truck is an 09 f150 with only 18k miles, but it's got a couple minor issues like soft brakes from sitting, I'll post those problems in the f150 section if i have any issues fixing. He liked to leave the extended cab windows cracked in the summer. Problem was, he would forget to raise them, sometimes weeks at a time. He was 88 and suffering from dementia. This leads me to my question : How do I QUICKLY get rid of the musky smell? I came home this evening, and went to put it in the garage, and the windows were fogged up from the inside, and it smells awful. The windows haven't been left down in at least 6 months. This sucks, because this truck is flawless other than this. Dad had put open boxes of baking soda in it, but it hasn't worked.
View 11 Replies