Ford Super Duty (1999-2016) :: Rear Shock Absorber Bolt Size?
Aug 14, 2014
What is the size of the bolts on the rear axle that hold the shock absorber? I believe its an M12 x70 mm long??
View 7 RepliesWhat is the size of the bolts on the rear axle that hold the shock absorber? I believe its an M12 x70 mm long??
View 7 RepliesYesterday evening my wife was following me down the road for a few hours, we are moving some stuff between houses. After 20 minutes she called me and said she could see occasional sparks under the truck,
Sparks?
A side of the road discussion determined she was seeing sparks near the drivers side rear shock absorber. I looked closely at that area and could not see anything that looked burnt. I felt the shock, axle tube, brake, brake line and E brake cable, but nothing was hot.
What is the thread size/length of the 20 transmission pan bolts on the 4R100? I am replacing the pan since the rust has finally started weeping ATF, and the bolts need to be replaced as well, they have turned into little rusty nubs. So i want to use stainless ones. I could pull one and go to the hardware store, but what is the size i can stop on the way home.
View 14 RepliesI made a bone head mistake and crunched the steel brake line between the rear axle and the passenger side sway bar mount. Truck is a 2003 F-250 with a 7.3. I would like to go to the auto parts store, get bulk steel brake line and bend it myself. But, I don't know what size the line is or what size the fittings are. Whatare the sizes???
View 3 Repliesso while replacing the rear brake lines in my 2001 F-250. / 5.4, the flex line that drops from the frame bolts to the axle through the axle breather threaded vent line. The friggin thing crumbled on me and now I can't find a replacement for it. Where I can get it or what it's actual name / part number is so I can call the Ford dealer and hope it's not obsoleted?
View 3 RepliesTook it in for an oil change at 90k miles dealer reported a leaking rear right strut and quoted over 1000k for replacement which i obviously declined. Now wanna know what are my options can I change just the one rear side which is leaking and do I have to put the oem or can I put anything aftermarket.
View 14 RepliesSo, in changing a rotor today, I noticed the entire top bolt of my shock absorber (rear left) was sheared in half. I researched replacements and saw the staggering price tag. In 8 years with this car (2003 Gx470) I've never once changed the shock mode from sport to comfort or vice versa. Am I correct in assuming that I can by a decent aftermarket shock as a replacement and not hook up the electronics and only lose the ability to adjust the shock from the cabin? I will still retain the ability to raise or lower the car, correct? If so, what is a decent and affordable shock to purchase? Also, while I am in there, are there any recommended bushings or other things to replace to cut down on squeaking and other noises?
View 2 RepliesI have a 2004 F250 Lariat Crew Cab FX4 6-3/4' bed.
What is the procedure to remove the Driver's side Rear Sway Bar Link upper bolt? - the link attaches to the frame. The nut is on the inside of the frame with about 1/3" to 2/3" clearance between the frame and the fuel tank. Of course, the frame's "C" shape faces towards the inside.
Just came back from a ride and since it's getting pretty warm here I decided to drive with open windows. At low speed I noticed a unusual squeak coming from the rear passenger wheel when I got over small potholes. This part of the car seems to shake really fast a few time before settling. I can also hear a drum like vibration in the car coming from that corner. I can feel an unusual bounce which take time to settle when it happen. I'm no expert but from what I read the usual suspect should be either a defective shock of broken control arm ? I'll get a nearby garage to take a look next week. Gotta admit, like some members pointed out, I'm surprised to see those kind of issues on a car which didn't even broke the 45000 miles mark yet... And that's for a car that I take really good care of and not used as a daily driver.
View 7 RepliesI have a relatively decent standard of DIY mechanics, but I have never worked on a Hyundai before.
I have a leak coming down the drivers side rear shock absorber (the bit that bolts onto the swing arm) this has obviously resulted the the rear of the car riding low, but, is there something I can take apart and replace or do you have to replace the whole thing.
it seems likely that it could just be a seal broken somewhere.
So just as I think I have it figured out what size tire and wheel combo I want to go with, I began thinking about going from an 18" wheel to a 17". I can save some cash, have a few more tire size options and save on tire weight.
I know alot of guys go up to a 20" setup but that's just not my preference on trucks.
Any negative to doing this? 315/75/17 tire size interests me. Had that on a Wrangler and liked the look. Going to look a little more at 17" sizes before deciding.
I need to know what the name of the part is that the front shock mounts to on my 2000 f250. Its terribly rusted on both sides and id like to learn more about replacing it. Might me called a shock mount? It saddles around the main frame on the truck.
View 3 RepliesI am looking to replace the 4x4 offroad sticker on the side of the bed and wanted to know the dimensions. I've been looking on eBay because dealer wants way too much for stickers. just want to make sure I get the correct size.
View 5 RepliesI bought a new 2016 F350 SRW and ordered the 17" aluminum wheels with 245 tires specifically to put on my 2005 E250 cargo work van.
I bought 20" Platinums for the F350 and used the existing lug nuts.
Now I need the flat faced washer type lug nuts for the van so I can use the new aluminum wheels. Are they the same thread as the F350?
i know the 05-07 grille badge is 9 inch the 08-11 is also 9 inch and the 11 up is 12 inch
wondered if there was a ford oval that was between the 9 and the 12 inch
2010 F250, what size tube do I need to fit on the brake bleeder screw? The tubes I have are all too big and the size marks are no longer legible.
View 4 RepliesWhat size socket is used to remove a lug nut on a 2000 F350 4X4?
View 6 RepliesIt doesn't say on the window and in the owners manual I should have a 23 or a 35. The most I've put in my truck is 29.somthing and I had 3 miles till empty and the needle was in the red. I'm thinking I have a 30 gallon tank but how can I find out for sure.
I have a 2015 F250 6.2L CC SB FX4
What size the pitman arm nut is? And where to get one? I am lifting my truck soon and I'm going to double nut that baby on there. I know they're prone to loosening. I just wanted to have all the parts before I started.
View 4 RepliesI noticed a thumping sound in the truck bed when I'm driving and took a look underneath. The rubber gaskets for the truck bolt are all rotted and falling apart. Does it have to be replaced?
View 5 RepliesNeed to know if the 5.4 and 6.8 use the same bell housing pattern?
View 5 Replies