A fellow ford driver (f150) pulled around a car on a residential street and clipped my mirror. His whole mirror as removed from his white beater truck. My mirror has the bottom plastic housing broken. Power fold and in/out and all glass movements work. How do i fix. Do the housing on the manual fold mirror with signal is the same as the power fold.
View 10 RepliesI have a 2010 f-250 lariat with a drivers side power fold mirror that does not fold. The part number is 1448007. Do they interchange? My mirror is a Power Fold, heated, extending type.
View 1 RepliesAlright so, I've done a lot of research to come across a mirror motor and I found one, problem is I don't have the slightest clue on how to take the morror apart. It attempts to fold then stops. So, I kind of jumped the gun and tried to pop off the main mirror and I cracked it. How to disassemble the mirror.
View 2 RepliesI just installed a set of power folding mirrors on my 2008 F350. I noticed that the driver side mirror has a longer travel time than the passenger side. How to fix, or why this is like that? Is it normal? watch the video to see what I mean.
[URL] ....
08 F-350 Lariat. Folded mirrors in twice today. Second time they would not come back out. After four hours the fold function has not returned. As I read Owner's Manual, if it's a fuse it should take out power to driver's seat . . . correct? All other mirror functions including telescope seem to work normally. So if I've identified the fuse correctly what else could it be? Fold relay? Switch? Where is the fold relay located and how can one test it? What pins on the switch are the fold pins? I just looked at power distribution box schematic. Power fold mirror relay fuse is there. Apparently the only function it has. Better go check it out.
View 5 RepliesI got back to my new truck after doing a job and found the passenger side tail light smashed. No note or evidence of what happened.
Will a 2013 or 2014 taillight also match this truck?
Looking for a part number for this passenger rear taillight?
I cant get my rear seat back to fold down anymore. I was on some very rough roads over the weekend and when I went to fold the seat back down the handle doesnt move. Is there a way to fold it without? Its almost like something is jammed which may be from the pounding the truck took over those roads.
View 3 RepliesThese are the non-towing mirrors. The truck was pretty well used when I got it; one tow mirror was broken, the glass in the other wouldn't move when I used the switch.
I found a set of power non-towing mirror locally and installed them. They dont work. I tested the switch and the wires at the connectors and I am getting 12v to the mirrors.
So I was thinking maybe it was a ground problem???? Then I took a 12v test light and probed the mirror wires at the connector (clip connected to ground) and then the mirrors slowly moved. I remove the test light and they don't work. Now I am confused.
I was wondering how do you remove the cup holder part of the console dose it just pop off or are there metal clips or screws hidden some how?
View 4 RepliesWhat the expected life cycle is for the fold in/out feature of the power mirrors? I garage my truck and need to fold mirrors when backing in and then unfold once out of the garage--looking at 2 in/out cycles per trip from the house. How long until the motor gasps and dies?
View 1 RepliesThe Truck: 2008 F350 Super Duty, Lariat Crew Cab 6.4 Diesel, Off Road package with just under 90K.
The Noise: It sounds like a cross between Morse code ticking (No Morse code message. I thought of that) and the sound a styrofoam cup makes when it rubs against another cup. The noise is fairly loud. Noticeable at standard conversation speaking levels. Doesn't just go away once it starts.
The Apparent Location Of The Noise: Sounds like it's coming from just right of my center fold down cup holders between the driver and passenger sides of the dash.
Process Of Elimination: No set rule for when it starts to happen but it doesn't happen all the time. SEEMS like it happens after a longer trip.
Air conditioning on or off doesn't make it stop. Fan on or off doesn't change anything. Restarting truck at a stop light doesn't change anything.
Varying truck speed doesn't make a difference. Banging on the dash near the sound doesn't make a difference.
I did some reading on here this morning and ended up at 1A Auto looking for mirrors. I want to make sure I get the correct thing before ordering. I have a '04 250 with factory tow mirrors that are power mirror and turn signal/clearance light. I want to upgrade to the '08 style. Which of these would work? I would think either, but I'm not sure about the wiring harness?
Search Results for 1AMRP01095 - 1A Auto
2008-10 Ford Mirror Pair - 1AMRP01096 at 1A Auto.com
I noticed an oil leak out of the front housing of my 2016 350. I have 3 Ford dealers nearby and all 3 can't get me in until 8 August. It looks to be just a few drops daily. Is it safe to drive pulling a 5th wheel until they get me in? The leak is at the bottom of the housing.
View 3 RepliesI was just washing my 2016 superduty that just turned 3000mi and noticed the light housings and plastic are broken on the license plate lights. The one just fell apart in my hand. 55k and this happens at 3000mi.
View 9 RepliesI was trying to replace the output sensor in my 5r110 when it broke off in the housing.
View 7 RepliesI trying to see if this is something that is a easy fix or mayor work. Leak coming from that metal housing behind alternator. Does this housing came off? or do I need to take out the intake out? .
View 8 RepliesNew to me truck has 80k on it, it's leaking at the bell housing. Pulled the inspection plate and it's definitely red stinky automatic transmission fluid. Back of the torque converter is clean.
Ford warranty has run out, however I do have an aftermarket warranty on the truck. Trans temp isn't above normal or running hot.
I'm a very mechanically inclined engineer, I do not work on cars for a living, but I have replaced an input shaft seal on a 4wd transmission before. That's my best guess as to what's leaking. Is this a common issue?
Noticed a small oil spot on my drive way where i park my truck the other day. Got up underneath and saw it was leaking from a rectangular rubber grommet on the front of the transmission bell housing.
What could be causing this? Have heard a few different things, turbo line leak, turbo pedistals, HPOP leak. Seeing what Super Duty Nation thought of the problem. Going to the dealer sometime this week.
I just recently had to replace the extension housing on my truck. Well after doing so I went to start it up and top off the tranny fluid and it started to leak out on the left rear side of the transmission near the extension housing. Ive looked and looked and found that the fluid is coming from the top right in front of the extension housing but when i clean it off there seams to be no holes or cracks. It isn't the housing seal, cause it pools in front of that. What could be the issue? My truck is a 01 F250 4X4 5.4L.
View 4 RepliesGot the new truck on Monday and I am trying to figure it all out
The mirror defrost comes on with the rear window defrost, my question here is does the defrost image on the mirror light up when on?
I have a 2000 F450, 7.3, 4x4, dually, VIN 1FDXF47F0YEA44380, with 30k miles, That needs a new rear axle - hub retainer threads on axle housing are stripped (nut welded on by previous owner). This axle is a case ID F81A-4001-BK, 4.88 ratio, 11.25 ring gear, with a 41.5" spring center. I have heard that the '99-'02 axles had issues until Ford switched over to the later square housed axles in 2002 or 2003 (Dana 110, I think). Is it possible to adapt these later (2002- 2004) axles onto a 2000 F450? And if so, what would be involved?
View 3 Replies