Ford Super Duty (1999-2016) :: Power Mirror Motor Not Working
Feb 11, 2015
These are the non-towing mirrors. The truck was pretty well used when I got it; one tow mirror was broken, the glass in the other wouldn't move when I used the switch.
I found a set of power non-towing mirror locally and installed them. They dont work. I tested the switch and the wires at the connectors and I am getting 12v to the mirrors.
So I was thinking maybe it was a ground problem???? Then I took a 12v test light and probed the mirror wires at the connector (clip connected to ground) and then the mirrors slowly moved. I remove the test light and they don't work. Now I am confused.
View 3 Replies
Advertisement
I've done a bunch of searches and can't really find much. The turn signal in my 03 SD doesn't work, and the back side is loose, probably a broken tab. I have cranked the mirror up, down, right and left, popped the tabs loose yet it feels like I'm missing one or a screw. I read that I may have to "Pop" my mirror off to get to stuff. The dealer said I have to buy a complete mirror assembly just to change a freaking bulb on an 03?
View 1 Replies
So my driver side map light went out, went and replace the lamp. Now I can't turn on the map light when I depress the lens on both front map lights. Both rear map lights don't work either when I flip the switch and the driver or passenger visor mirror doesn't turn on when I flip the mirror cover. Maps lights do come on when I open doors. Also my Home Link (garage door opener now doesn't work). It's throwing a P1260 code (Theft detected vehicle immobilized). Do this might be related to my light issue? Is there a fuse on relay that controls this that might be bad or something needs to be reset? I've looked at the fuses by the passenger floorboard and every thing looks good. Why this is happening?
View 1 Replies
2012 F350 Lariat 6.7
The blower motor has quit. All fuses relays etc appeared to be ok. So I tested the connector going into the motor, I saw 13.9 volts so assumed it was a bad motor.
After removing the motor I bench tested it by connecting 12volts to one side of the connector and negative to the other. It spun up.
I re-tested the motor supply connector in the vehicle, it has 13.9 volts on the yellow wire, and 4.44 on the other. I adjusted the fan speed on the climate control, although the fan images on the display increased, there was no change to the voltages on either line.
I used the 13.9v connection on the positive terminal and a ground on the negative, the motor spins.
Is there a method for accessing codes that will display what is causing this failure?
So why do I have 4.44 volts at what should be a ground? Is this a bad resistor or is the climate control euchred.
View 4 Replies
A buddy of mine has a 99 F250, and the 4WD stopped working. The 4wd light in the dash does not turn on with the key with the rest of the lights. There is a Low Range light that does turn on. He took it to a shop/dealership and they said the vacuum was good. They also swapped in a different GEM module, which didn't change anything.
I swapped the relays under the hood - no change. I keep reading that there is a two wire plug on the transfer case I can test for voltage or to manually power the motor. Where is it? I see two plugs - the blue one on the left has 4 wires, the black one has more. Or is that not the shift motor I need to be looking for?
View 6 Replies
Trying to replace sliding glass motor, quit working and had to cut the cable to shut it due to the rain. It appears I need to remove the seat belts & covers next.
View 4 Replies
A fellow ford driver (f150) pulled around a car on a residential street and clipped my mirror. His whole mirror as removed from his white beater truck. My mirror has the bottom plastic housing broken. Power fold and in/out and all glass movements work. How do i fix. Do the housing on the manual fold mirror with signal is the same as the power fold.
View 10 Replies
What the expected life cycle is for the fold in/out feature of the power mirrors? I garage my truck and need to fold mirrors when backing in and then unfold once out of the garage--looking at 2 in/out cycles per trip from the house. How long until the motor gasps and dies?
View 1 Replies
I did some reading on here this morning and ended up at 1A Auto looking for mirrors. I want to make sure I get the correct thing before ordering. I have a '04 250 with factory tow mirrors that are power mirror and turn signal/clearance light. I want to upgrade to the '08 style. Which of these would work? I would think either, but I'm not sure about the wiring harness?
Search Results for 1AMRP01095 - 1A Auto
2008-10 Ford Mirror Pair - 1AMRP01096 at 1A Auto.com
View 8 Replies
I have a 03 f 350 6.0. My 4x4 wont engage. I checked my fuses all are good except 31 no power. Is this the culprit?. I get power at the 6pin pig tail on shift motor, but the 2pin pig tail doesn't get any power at all. I pulled shift motor off manually put power on it and it works. I also replaced both 30amp relays under hood...
View 1 Replies
Troubleshooting a problem with friend's 2000 F250. His power windows aren't working and are causing problems with his door locks and interior lights. When he tries to use his drivers side power window, his power door locks quit working. If he puts the switch to raise, the interior lights flash. From what I've read, it sounds like the GEM to me, we've inspected the wiring and it all looks good. I pulled it out today and it looks good inside, no sign of water leaks on it. If it is the gem, how much do they cost and do they require programming?
View 5 Replies
I have a 2010 f-250 lariat with a drivers side power fold mirror that does not fold. The part number is 1448007. Do they interchange? My mirror is a Power Fold, heated, extending type.
View 1 Replies
Got the new truck on Monday and I am trying to figure it all out
The mirror defrost comes on with the rear window defrost, my question here is does the defrost image on the mirror light up when on?
View 14 Replies
In the last 15k miles, I've replaced the led lights on my driver side mirror twice already, and come to see this morning: they are out again. The turn signal LEDs still work, but the parking lights don't work anymore. Passenger side is fine.
View 3 Replies
So both the mirrors on my new truck are cracked. Driver side got hit, and the passenger side just doesn't respond, might just be a power thing. Anyways I'm wondering if there is any hassle to switch to a different style of superduty mirror? The 08 ones are really nice, if I can find a set for a decent price. Mine are just the basic ones, they look like half ton mirrors. I'm pretty sure they would just bolt in, and wiring really is no issue for me either. Just wondering if would encounter anything that might be an issue.
View 2 Replies
got a quick question, i have the 1aauto 2008+ mirrors on my truck. How do you take the mirrors apart? When it rains or i wash the truck the bottom of the mirror fills up with water, and it slowly drips all over my doors when i drive the truck and when i open or shut the doors the water sloshes around and again gets all over my door. I want to remove the bottom piece (if it comes off) and drill two drain holes, i would do it on the mirror still but im afraid id hit the wires or something for the heated/power functions
View 5 Replies
I am trying to figure out where the relay would be when i look online for the map of the relay box under the hood it says nothing of a horn relay. I don't have a key fob for the doors to unlock so I wouldn't think its tied to the computer. Should mention nothing happens when you hit the horn also fuse is fine. No power at the actual horn when i hit the steering wheel(horn)....
View 8 Replies
I have an early 99 F250 that I'm putting 08+ mirrors on. I'm not real sure what year they are, but no wiring diagrams I can find match up. See, my mirrors have 12 wires. All diagrams I find have 10. The colors don't match either. I wanna wire these up but I can't decipher the wiring.
View 2 Replies
How to change the bulbs in my outside mirrors.
View 2 Replies
I have a 2016 F250 XL and I want to put smaller outside rear view mirrors on her. I thought I can't be the first person to want to do this but repeated searches haven't turned up a bit of information.
I have the stock XL black plastic tow mirrors. They are manual extension and manual fold in. No heat, no lights, nothing. I want to go to a smaller, non-towing mirror like comes on stock F150's, chrome would be OK. In about 18 months I will want to go back to my trailer towing setup. I need to be narrow for a while.
View 8 Replies
I did a search and could not find a post I had read regarding mirror vibration after replacing the mirror and back panel of a side mirror. I snapped in the new mirror and everything works properly, but the mirror vibrates so badly you can't see. Somewhere there was mention of a clip to dampen vibration.
View 3 Replies
