Ford Super Duty (1999-2016) :: Grinding Noise At Slow Speeds - Clunk When Coming To A Stop?
Oct 26, 2015
Every once in a while, while driving my 06 350 SRW at slow speeds, I hear a grinding noise coming from the left side of the truck. It is almost like a winding grinding noise if that makes sense. It will grind slow to a stop, and then I hear a clunk.
This is a very intermittent problem. The tires are completely shot on the truck, and I thought that would be it, but considering it is intermittent and the clunk I hear as I come to a stop I figured it could be it.
View 4 Replies
Advertisement
I have a 2005 F-250 4x4 and recently i noticed a grinding noise while driving and then when I come to a stop I hear a clunk and the grinding stops. It sounded like it came from the driver side wheel so I changed the wheel bearing assembly. About 3 days later it started again. Now it sounds like it's coming from both sides. I am at a loss. The hubs are unlocked. It's hard to describe the sound but to me it sounds like 2 gears with a large chain rotating on them. I hope that made sense. The clunk can be felt in the brake pedal.
View 2 Replies
Have an f350 4x4 diesel that when I drive slow and especially turn to the right it makes a grinding noise. It seems to either go away or just gets muffled by road noise when cruising. The ball joints were bad so I replaced them and I figured with this especially when I turn right it had to be a wheel bearing so I replaced both of them and still same thing. Don't want to throw money at it hoping to fix the issue. Also front duff is full of oil.
View 5 Replies
Experienced rumble type noise, like if you drive over those highway rumble things on the edge of the road. It happens at low speeds like 30 mph or lower and more prominent when you come to a stop. It came on all of a sudden . Replaced new tie rods, dampener and stabilizer bar links and still have it. Tires wear great and thought the hub's were still turned in as it sounded the front differential drive line was going around. This is on a 2002 F250 crew cab.
The complete tie rod kit that connects to the the pitman arm isn't cheap, it did need replaced as there was a lot of play in it but damn, when on a set income and it still have same problem , very upsetting. On social security disability and I told them that I can't keep spending money on parts that they told me were bad and it didn't work. Everything is tight on the wheel according to the tire shop , it takes me a while to get underneath and I can't find anything .
View 11 Replies
I have a 2006 F350 6.0L Diesel with about 72,000 miles on it. It has been the best truck ever, but just about two weeks ago it started doing something real strange. While driving, and it seems to only be at slow speeds, (idle or just accelerating), the truck will shut off the engine. And it is always in this order, it will first "pop" all the speakers real loud, then the radio will reset, (go to the AM radio and shuffle through my 6 disc changer) and then the engine will shut off.
Once I bring the truck to a stop and put it into park, it will then start back up with no problems at all. There is nothing I can seem to piece together as to when it will do it other then it seems to only be at slow speeds... Besides that, it is completely random. One day it did it four times, and then it didn't do it for the next few days at all... The only thing that has changed over last 2 weeks is that, the last few times that it has done it, it didn't kill the engine, it still popped the speakers like normal and then reset the radio, but didn't shut off the engine.
View 14 Replies
1999 F-350 7.3 Dually 2wd Front End issues. I think I may have several things going on so here goes. Truck has about 130,000 miles on it . Bought it with 60,000 miles in 2009.
It's always worn the front tires weird but it's gotten a lot worse and it's happening in about 10-15 thousand miles now. It's wearing the tires on both sidewalls like under-inflation but I run 70 lbs in them. I've noticed for several years now that it makes a knocking sound and I feel it in the floorboard, shakes in the steering wheel when I turn to the left only in a corner at speed. (65-70) ...
Now it's started intermittently going into the death wobble at slow speeds like the caster is to negative on it. I'm sure it could use some shocks but I just rotated the tires and I felt no play anywhere. I know when we used to get that bumping in the floor board on older Fords it was a bad radius arm bushing but that couldn't be all of what's going on here. I've done searches on this and it has happened to others but I haven't found a resolution from any yet.
View 2 Replies
2008 F-350 ... Getting a click in the steering wheel. Slow speeds in parking lots. Even with the truck off you can manually move the wheel and notice it has play. Maybe 1/16" - 1/8" of play
Read a few old posts saying there was an TSB on it TSB 05-15-1 ... Couple of the posts say they replaced the steering column. Wanted some input before I pull this apart. It's more annoying than anything ..
View 1 Replies
I have a 2002 F-250 7.3 Powerstroke 4x4. My truck has developed a "clunk" for lack of a better term when accelerating from a dead stop. It is not a shudder as it only happens once within a few seconds of depressing the accelerator and then goes away until the next time I stop moving.
It feels like either something in the drivetrain is not engaging right away, or something is releasing, like a stuck caliper or something. From the way it feels and what I've read so far about the TC/Trans, I'm assuming it is something worn in the drive-shaft/rear diff.
But it needs brakes badly (already have all new rotors & pads ready to install) so maybe a caliper is sticking when depressed and then popping loose under initial acceleration? I think this is unlikely but possible.
View 12 Replies
Have an 06 F250. When I slow down to make a turn then accelerate it's like the drive shaft spins half a turn before it catches. Been doing it for awhile now. Now I'm get a clunk when I come to a complete stop. When you stop then truck settles there is a little clunk. Does this sound like the slip yoke problem?
View 1 Replies
My truck starts sounding off like a foghorn at slow speeds and idle, goes away as soon as you tap the gas pedal. The truck is all stock. 2004 5.4L ....
View 1 Replies
2012 f250 SC xl 6.2 - Is it normal to hear a single clunk sound on occasion when accelerating from a stop sign? Doesn't happen all the time mind you and I don't ever remember hearing it in the past.
Now just today, while backing up my driveway, as soon as I started the reverse motion, I heard the same clunk. Sounds like metal to metal and comes from the rear of the truck.
Only 7000 miles on her and I treat her like a baby...anything I should be concerned with?
View 7 Replies
I just got my truck back from the dealership where they said they tightened the nut on my pitman arm and now when turning either left or right when I approach full lock there is a massive pop or clunk that comes from the steering box. I have crawled under the truck and watched and felt everything as the wheels turn and the draglink, tie rod, sway bar links and cv joints as well as the front drive shaft are all fine. The noise is definitely coming from the top end of the pitman arm or higher. What it could be or how to fix it? I have an 03 6.0l f250 with a 4 inch lift all new springs and new sway bar
View 3 Replies
I had a pretty good clunk going on and found the passenger tie rod was shot. The rest of the steer components looked fine. Fixed it and still get a nice bunch of clunks. Went over the steering again with someone rotating the wheel and didn't notice any crazy movements. The drag link twisted a bit but the joints looked solid compared to the tie rod which was completely shot.
So I decided to dig into it today. Looked again and nothing. So I took it into my back yard to drive over some humps left from stump grinding. Clunk, clunk, clunk. I stuck my head out the window and wouldn't you know it the sound seems to be coming from the rear! Took a pry bar to parts like the sway bar links, shocks, etc.... can't detect anything. Maybe a u-joint? Gotta dig in I guess.
Also my rear springs creak like nothing I've ever heard. Dirt roads it's just creak, creak, creak.
View 2 Replies
I have a 2002 F350 with the 7.3 diesel. I have had this truck since it had 30K miles on it and it now had 90K miles. It has been trouble free minus new pads and batteries. I recently changed the fuel filter and used a Donaldson filter. In the last week while driving the truck just mysteriously shuts off when I slow down for a stop sign. The only lights on the dash is the red battery light, and it fires right back up. I believe it has the original CPS in it as I have never changed it. Do you think this is the CPS going out or something else? I was wondering if the Donaldson fuel filter has anything to do with it?
View 5 Replies
I just bought a 2004 f350 4x4. There is a horrendous clunk coming from under the cab as soon as I steer and at certain rpm while driving straight. I have researched this topic for hours and everyone says sway bar links. Well here's what I have done so far and the truck still has the same terrible clunk. New sway bar links, new sway bar bushings on axle, new front drivers hub, new front passenger hub needle bearing, both front dust seals on axle, greased all ujoints and balljoints, tightened up some bolts for the dual steering stabilizer, and shook the heck out of all other ujoints and the cab mounts and they all seem good...
View 14 Replies
2011 250 CC FX4 LARIAT 6.7l Just had the oil changed on Friday and I noticed a couple oily spots in the driveway. Crawled under to investigate and there is a slow drip coming off the plastic oil plug. Called the service center and they said the seals on those plugs fail pretty regular. What was done to eliminate this issue?
View 9 Replies
So the other day i opened the door and heard a super loud clunk noise come from the door and when I turned the car on and pulled hte window down it wouldn't go down all the way, only about 75% of the way so I assumed like BMW cars the window motor died but oddly it continued to go up and down just now 100% down.
Then 3 days later when I came to drive the car again the window went down to the 75% mark and now its jammed there with no movement even if I tried to lift the window up myself. Usually a broken motor allows this to happen but since it isn't budging I am wondering if its an electrical issue with the power window button more than the motor?
I say this because when i try to lower the passenger window from the driver side it works than out of no where on the 3rd time it wont move at all than 5 minutes later it will move or if it doesn't move I just go and pull the window down from the passenger side then I come to the driver side and try it and it works again than it'll stop again. So maybe its the power window control buttons on the drivers side that's failing?
View 2 Replies
If I use ATP AT-205 stop leak to stop a slow leak coming from the rear main seal, will it last a long time? And if it stopped working eventually, would adding more stop the leak again?
Also, I'm going to have the transmission out anyway, so how many hours would it probably take to just replace the seal at that point? And someone told me some seals were two halves that fit together as one, and others are just all one piece. Is that true? It would seem to me that a two piece seal like that would start leaking prematurely.
View 3 Replies
I've been noticing a grinding coming from the front end of my 2012 f250 4x4, mostly while turning. It seems like its worse over uneven terrain, bumpy dirt roads, things like that, but I have noticed it on occasion while on seemingly smooth roads. Also a couple times while turning and lightly braking I could feel it interfere with the brakes. They wouldn't grab completely and you could feel the grinding in the pedal. I've been crawling around looking for rub marks or any indication of what might be causing it but until recently I hadn't noticed anything. Today though I found this. I'm guessing bad ball joint or tie rod maybe? Maybe just need alignment?
Passenger side lower control arm ...
View 11 Replies
I have a 2004 f250 with some front end troubles. When turning right once in a while it will make a hard CLUNK noise and then trying to drive down the street it drifts over to the left and I pull the wheel back to the right and when I turn the wheel it feels like I like theres something hitting somthing else in the front end. I have checked ball joints and tie rods and they are all nice and tight. Some stuff I have done that probably isn't related to my problem is shocks and sway bar end links. What this could be? Hopefully not the steering box!
View 7 Replies
I have a 2000 F-250 Crew Cab with Lariate Trim package (not sure how that could be relevant to the issue, but it might be?) and auto locking Hubs. Recently, the truck has taken to making an intermittent grinding/Rubbing sound that comes seems to come from the wheels. I can not locate the sound exactly since it only happens when I'm Driving, I have never heard the sound at any speed lower than 20 mph or when the 4x4 is engaged either manually through he hubs or the selector in the cab when the hubs are in auto. All this leads me to think that I need to replace the autolocking hubs, but i'd like a second opinion (or even third) before I go to the trouble of replacing them.
View 1 Replies
