Can't find my manual and getting ready to haul camper in an hour...no trailer parking lamp power on truckside plug. No blown fuse but heard there may be a relay.
View 1 Replies2004 super duty crew long bed 2wd, v10 auto SLT.
Manual says not in fuse block.
Looked behind radio, nothing, not even a space or the blue one there.
There are some on the firewall, driver side not marked. No pink wire.
Where else??
I am looking for the location of the fuel pump relay for my 1999 Ford F550 V10 4WD Gas truck.
I have replaced the fuel filter and fuel pump. When the key is turned the pump gets juice and 2 seconds later is not getting juice. No lines are coming into it, so it's not getting up to pressure and shutting off.
I am trying to diagnose my fuel system, but I cant seem to find the fuel pump relay. My truck is an 2004 f250 crew cab work truck with 5.4L. it seems that the relay can be mounted anywhere from behind the radio or in the engine compartment as well as built in to the fuse box under the steering wheel.
View 14 RepliesAttempting to debug the Horn not working on my 2003 Ford F450, The fuse is good (shown as #37 15 amps) so next I would like to check the Horn relay.
View 5 RepliesThe #8 fuse under the hood was blowing on my '00 F-250 every time I turned on the healights meaning I would lose power to my park lights. The brown wire coming from the back of the headlight switch showed a dead short to ground that I traced to somewhere between the switch and the firewall.
Anyway, I got tired of trying to pinpoint the ground fault, so I cut the brown wires at the back of the switch and under the hood at the top bolt-on electrical plug and replaced the bad section with a new wire. It works fine now with the only exception being I do not get the park light flash when I hit the remote lock button the second time. I do still get the horn chirp.
My Haynes manual indicates there should be a relay box with a Park Lamp relay, Driver Unlock relay, All Lock Relay, and All Unlock relay. The park light relay looks like it sends the blip of power to the park light circuit. Where this relay box is? I'd like to splice into the brown wir coming out of it to restore the light flash when I lock the truck since sometimes it's too noisy to hear the horn.
Looking for where the fuel pump relay is 2001 f 250 SD reg cab 2 wd. Won't Start On pump gas , starting fluid yes
View 1 RepliesIts it true, that the fuel pump relay is hid in the fuse and relay box, and non serviceable ?
View 6 RepliesRecently got a 2003 f 250 6.0 that has had a little work done on it. Absolutely love it with 1 exception. When I turn on the ac or heat It blows a 10 amp fuse that goes to the blower relay. It was occasionally now it's all the time.Blower ok, fan speed resistor ok. What or where to look.
View 8 RepliesOn a 2003 Ford Superduty, 4x4, 5.4, supercab; where is the fuse for the power seat?
View 11 Replies2009 F250 Super Duty 4X4 auto lock hubs not working. Indicator lights on dash come on but will only go into 4 wheel drive when hubs are locked manually. Vacuum is present at lower of the two vacuum lines when engine is running. I attach the lower line to the module, rotate switch to 4X4 high or low and module doesn't allow vacuum to reach upper nipple. Which fuse operates this module?
View 3 RepliesThe 5amp fuse 15, (Stop lite switch, GEM, PCM, 4WABS, Brake shift Interlock, Cluster 7 PCM-Keep Alive memory), is drawing 2.7 amps with key off.
The battery has gone dead two times overnight. The truck will start and run. I don't know where to proceed from this point to isolate the problem.
My truck keeps blowing fuse 28 in the inside fuse box. This fuse belongs to the ignition relay, and only blows when I go to start the truck. It is intermittent
View 14 RepliesWhere the ICP is located on a 2006 f350? I have a no start condition after the truck warms up, everything else is fine. Started fluid works to crank, I suspect the ICP and /or Orings.
View 4 Replies2008 F350 6.4 diesel. I have the listed truck in the heading, my #9 fuse which is for the interior lighting, lighted running boards and it is a 15a fuse, keeps blowing as soon as I touch the fuse to the fuse box to replace it. I have look at all the map lights and interior lights and can not find any thing out of the ordinary, all of these light were working fine, also my cruise control and the back up sensors stopped working and they are not on the same fuse and the other components that are on the circuit with the crule and back sensors still work, I know that this is a lot of different things but hate chasing electrical ghosts...
View 3 RepliesI'm having an issue on my 2008 f250 power stroke. My telescoping mirrors are causing the fuse to blow instantly when I hit the button. Where to start looking for a short?
View 2 RepliesI have a 2008 f-250 2 days ago all light stopped work except the head lights found a blown fuse replaced with a new fuse and now all the lights work except the right rear brake and signal but the running light works so i know its getting power looked at the wireing and it all looked good to me oh ya pulled my trailer in and same thing everything worked but the right brake and signal ....
View 4 RepliesI have a 2008 f-250 4x4 extended cab, I picked up a set of black rock steel wheels 17x9. I now have 265 70 17s on my truck. will these wheels work and with what size tires.
View 4 RepliesI have a 2008 f250 with 5.4v8. The truck starts intermittently. Put key in turn if no dash lights it doesn't even crank or hear a click. If u put key in and turn and dash lights up to starts and runs. U can watch the different lights (instrument cluster) light up independently like a xmas tree. When truck doesn't start if u disconnect battery when touching power wire to battery. Post truck lights will flick on/off if u tap cables to battery and leave on. Lights flicker on/off and then stay off. (Don't know why shouldn't flicker at all) after disconnecting and reconnecting battery truck will or will not start still depends on if dash lights come on before cranking.i replaced battery, starter, alternator, all the ground cable connections and wire cleaned. I haven't replaced the power side but are clean.
View 3 RepliesI have randomly getting in my sd. It is an 08 f250 xl with a 5.4. randomly my truck chime at me, hence why I haven't been able to capture it on video. It will chime twice. The sound is a subtle bong, bong. It is never predictable and never affects anything, but is annoying and I am curious as to why it does it.
View 14 Replies2008 f250 standard cab long bed 2wd base model 5.4. This thing has been great for the last few years i i owned it but it developed a shake since i got new tires. My mechanic mounted 4 new Hercules Terra trac at 2's on my 18 inch wheels (275 70 18) and when i got the truck back it was shaking violently at anything over 45. Mechanic says the new tires are heavy and its affecting other things...sounds plausible. So here i am a month later with a New steering stabilizer, all new ball joints, new shocks, new u joints, and 1 new tire (he said 1 of the brand new Hercules had a broken chord). The shake is 80% gone but this truck is still not the same. Anything after 65mph and it has a feint wobbly bouncy shake. I don't think its the dreaded hop that everyone gets on these. I have 2 theories:
1. These cheap tires just suck and will never be right
2. The cheap junk Monroe shocks he put on are way too soft to do anything
so what do i do? Should i get some crazy shocks or will that make this truck even bouncier? Im worried about making it even stiffer than it already is.