I am looking for a wiring diagram for that taillights for a 1999 f350 pickup. I am working on a friends truck that doesnt have any taillights and I would like to have a diagram in hand before I get started on it.
View 7 RepliesWhat is the factory radio wiring colors or know where I can find a diagram?
View 14 RepliesI just picked up my 2007 F350 as a replacement for my 2003 F350 (still have the 2003). I really like the uplifter switch option on the truck, I can normally figure things out but I am one of those people who is electrically challenged (home and auto)and also am one who does not wish to butcher the new ride (same for the home)to gain an education in the art of wiring. I would like to reinstall my headache rack lights on this truck as they are needed for winter work. I was in my truck manual and the info for wiring is weak and the website did not respond nor did my email to ford. I have found the wire harness but it is not tagged as a pair/color to switch. I have the lights already grounded to the rack, so I am thinking I just need the hot wire from the switch. Looking for the color code for positive and ground for the switches.
View 14 RepliesI'm currently trying to swap out the standard AM/FM/CD for a DVD receiver with backup camera, and need to find out the proper wiring colors and pin position. I'd rather not send it to a stereo shop, as I've seen a lot of hack work by so called "audio installation experts", and besides.. I have a shop and can do the work myself.
I tried looking through AllData, but since my truck is too new, Ford doesn't release a lot of technical info for us in the aftermarket. Looking for a link to a Ford diagram?
Looking for a wiring diagram for the coolant temp sensor? 1999 F250 SD V10....
View 4 RepliesMy four wheel isn't working. I have a 2002 f250. When I turn my esof switch the dash light doesn't come on and when I turn on the lights the switch doesn't even light up. I'm going to check for power at the switch but I was wondering to get a diagram for the 4x4 so I can see if there's anything else I can check or look at.
View 9 RepliesJust got an inexpensive LED Stop/Turn/Taillight Bar my problem is it has (3) wires Red, Black and White while the available connection from the old bar has only (2) wires Black and White with Red Dots.
The wiring instructions for the new LED bar says (1) Attach black wire to tail lamp circuit(+), (2) Attach the Red wire to the stop/turn circuit(+) and (3) Attach white wire to a good ground(-) location.
How I should hook this up? My thought is Black to Black , Red to White with Red Dots and White to Frame metal.
I am looking for a site that i can download a service manual with good wire diagrams. I want to install an alarm with remote start and need to know what wires go to what.
View 2 RepliesFirst, need a wiring diagram for the outputs on the back of the brake controller module? I want to check and see if there is a problem with the connection to the rheostat. I can activate the trailer brakes with the slider bar but not with the brakes.
Second, where I can get a new OEM controller that will replace my old one if I can't "Cypher it out"?
I just had a headache rack built for my truck. Looking to wire in 2 very bright reverse lights, 2 not so bright lights to deal with stuff in the bed of the truck at night, and also mounted a receiver hitch so I can hook a winch up back there when needed. looking for opinions on wiring for all of this. Never wired stuff like this so I'm shooting in the dark. My wiring skills are adequate but not great.
View 7 RepliesOn one of the trucks in work, the salt has corroded the truck side plug for the reverse camera in the tailgate. Because of this, the camera no longer works.
Is this part of the whole rear wiring harness, or it the tailgate plug a separate pigtail that can be replaced? If it is a separate part, what is the part number so I can order it?
Installing a Pop N Lock on a 2016? What were the wire colors you tapped into?
View 3 RepliesI used a buddy's trailer the other day, but on my way to work yesterday I noticed my tail lights on my truck are not working. The bulbs are fine I cant find a fuse for taillights .My blinkers work and brake lights work just no rear running lights...its gotta be a fuse but which one
View 4 RepliesIs there a hose diagram for the four wheel drive? My hoses are dry rotted at the hubs so I was wondering if there are more somewhere that I have to change?
View 2 RepliesHaving a problem finding the right belt diagrams for a 2000 F53 stripped chassis in a motor home and the dealer has been no assistance even after spending a bunch on parts...
View 4 RepliesIs there a more recent write up with pictures, special tool list and/or part numbers?
Early 1999 needs ball joints on drivers side. Should I just do both sides?
Looking for a complete exploded parts diagram for the front axle on a 1999 4X4 F-250?? (If possible from the wheels inward.) Having some issues and really need this.
View 8 RepliesI am trying to add courtesy lights to the existing reflectors in the front doors of my supercab. I can't find a wiring diagram that shows where to connect the light sockets. 1999 F250 SD...
View 2 RepliesGot my 240 amp alternator in and had all new 1/0 GA battery cables with a 250amp fuse in line made to do all new lines. I started tonight and found a small line going from the alt connector down the power line to a fuseible link (fuse) all in the power line
I wanna do away with the main 4 ga alt wire but obviously I can't do anything with that line going to the plug. Can I put a connector on it and wire that into the one side of the 250amp fuse.
The only other option is to add a wire to beef up the stock line ....
I currently have Aux2 hooked up to my on-board compressor and it works like a charm...so I'd like to think I know how the wiring works for the upfitters haha.
This weekend I installed an electronic solenoid valve for my slip-tank so I can fuel up on the go. The valve is 110V AC and had two wiring leads of the same color so I assumed either/or could be used for power and the other for ground. I wired it all up running a power lead from Aux3 back to the valve and grounded the other wire to the body. To my surprise...no power! Can a 110V AC valve not be used in this application or is my wiring simply messed up/not making contact?
I have an early 99 F250 that I'm putting 08+ mirrors on. I'm not real sure what year they are, but no wiring diagrams I can find match up. See, my mirrors have 12 wires. All diagrams I find have 10. The colors don't match either. I wanna wire these up but I can't decipher the wiring.
View 2 Replies