My windshield washer has recently just sprayed up about a foot.
Will adding some vinegar to the fluid and see if it will unclog?
Or does this just mean that my pump is giving up?
'99 F250 SD V10
I have an 04 F250 and the driver side windshield washer doesn't spray on the windshield. It sprays a stream up high on the windshield. Is it possible to replace the spigot where the spray comes out? Is there another solution?
View 7 RepliesMy new to me, 2005 F-250 windshield washer nozzles don't work. I have replaced the windshield washer pump, cleaned out the washer fluid container and rubber filter screen, blew air through the lines and the passenger side nozzle barely sprays and the driver side nozzle does nothing at all. I guess I have clogged nozzles. What is the part number or place you bought them? Looked online and everything I can find is so generic.
View 14 Replies2011 F250 with hood mounted windshield washer nozzle. How do I remove the nozzle? In a campground with basic tools.
View 6 RepliesI have a 2005 F-250 6.0 Powerstroke.
My washer fluid pump is not working, it was a few weeks ago but now it is broken. The Owner's Manual only has the listing fuse 33 for "cluster, 4x4, wipers". It looks like some of the older models have an actual fuse for the "washer fluid pump". I checked fuse 33 under the dash and it is ok. What fuse controls the washer fluid pump?
The pump does not make noise when activated, so I'm starting at the fuse but I don't know what the hell is going on.
Filled up the windshield washer tank this morning and could not get the sprayer to work. Looked under the truck and it looks like all I put in is on the drive. Any one else had issues with 2011 F350 washer tanks?
View 3 Replies1999 F250 5.4l base work truck. My problem is wipers, washer do not function. It all started with my wipers staying on. I removed the fuse to stop them. When i put it back in nothing. I have bench tested all relays, checked fuses, put in a new mfs, put in a new/used gem, checked all wiring i can seem to find, refreshed grounds etc. I am starting to lose my mind with this thing.
I have gone through all of section A and B of these tests [URL] .... except for the NGS scan tool.
Tonight checked the pins at the central junction box relays to see what was going on. This is where things got interesting. i have constant power at pin 5 of the run/park relay. if i jump this to pin 3 the wipers run. Pin 5 of hi/lo and washer show no voltage, however show continuity to ground. pin 5 of run/park also shows continuity to ground.
With the key on I have 12v at pin 1 of the hi/lo, run/park, and washer sockets. when cycled through the switches show i have continuity to ground on pin 2 of all sockets as they should. However, when relays are in place they do not "click" over.
What am I missing here? As much as I'd hate to do it, I may end up just throwing a switch in to "jump" the run park relay for temporary single speed wipers.
My 01 f250 has a leak coming down my line of sight on the windshield. Not sure if it's the seal, or the clearance light above it. Ever run into this before?
View 3 RepliesI have a problem on my F250 4x4. The 4x4 doesn't engage from inside. I tested for vacuum on the pipe that leads out of the solenoid. There seems to be no vacuum building on the outlet line. This is the line that go to the wheels. Is my solenoid stuffed. the pump works well and vents do not default to defrost.
View 14 RepliesMy truck doesn't want to go grab parking!! The shifter has a lot of play, Every time I go to park my truck I have to forcefully hold the shifter up into parking so it can grab. I had times when the shifter its in parking and it will still move, like I've gotten out and pushed it and it moves.
View 1 Replies2004 f250 wipers and fluid not working Done the usual stuff checked the fuses in the cab and the 15amp fuse is good and the 30 amp fuse is good. Is there something under the hood i should look at?
View 3 RepliesParking brake light stays doesn't come on when the parking brake is engaged. The light DOES come on when starting the vehicle and the gauge cluster cycles through its start up procedure. Couldn't find a fuse that would fix my issue...does one exist?
Truck is an '02 F250 w/ 7.3TD and 6 speed manual.
-10'C this mornin and my driver side windshield sprayer is frozen solid. After 10 mins I can see the snow and ice melt around it but still won't spray. This is typical of cars with too much space between engine and hood.
Gonna have to get out the extension and hairdryer tonight. Maybe find some kind of portable mini dryer that works off my 12v to 120v converter as a long term solution.
When I press the lever to spray washer fluid on the windshield none comes out. I hear the motor and the wipers work.
View 2 RepliesI have an '08 Lux wagon with rain sensing wipers and automatic headlights. When I spray the windshield with washer fluid, the wipers don't come on to wipe it away. This occurred today, and the wipers would not activate no matter what position I put the control stalk in. Then, after a few seconds, they came on and cleared the windshield. I have not noticed any other issues with the wipers. What might be going on here?
View 7 RepliesI have a 2005 Elantra and the fluid will not spray onto the windshield. The washer motor is good and the switch is new. What is the problem? Wipers work fine.
View 3 RepliesLong story short, ended up spilling a small cup of watered down paint in the bed. Of course some ran out the bottom as well but I'm most concerned with the bed. How to remove the paint? Since it was so diluted I figured it would wash right out at the car wash with high pressure.
View 6 RepliesCurios problem with my car. When I spray washer fluid quickly the wipers do not start. I can literally empty litres of fluid on the windshield and they still will not activate. Now on other cars I have had you can play chicken and pull quickly on the lever and this I can do a off a couple of times without activating the wipers but not constantly. I had it in for service and the mechanic said he has never seen this problem before and does not even know how to fix it. It does get annoying that you have to waste a lot more fluid to activate the wipers "auto" function by holding it on a few seconds longer than needed.
View 7 RepliesSo a truck that was running fine Sat for 2 weeks. Battery died so i sent some coworkers to jump it. They tried using a welder which they didn't get turned down enough. Now the wiper motor stays on even without the key. Radio doesn't work but the dash light still comes on. With a new battery installed it turns over but doesn't start. I know something had to get fried but where to start. Thinking about replacing all fuses and relays...
View 7 RepliesCan get up to speed about 55-60 in my 2003 f250 6.0 4x4 truck and hit the brakes hard and the pedal gets hard almost like you cut the truck off and the truck doesn't stop well I can let off the pedal and hit it again hard and it works like it should. Also when it does this the power steering doesn't work. I was on an exit ramp and almost wrecked when I exited off the interstate I hit the brake pretty hard and couldn't steer I let off the brakes then hit them again and it worked fine and so did my steering. It would seem that the two are connected somehow. What's wrong?
View 2 RepliesI've been battling this high temp issue for a bit now. Here's the recap on my truck.
2005 F250 6.0
120k miles
Edge insight CTS2
New factory Oil cooler
motorcraft coolant -system flushed
Stock EGR- No leakage
Deltas 3-5 degree apart no A/C on
A/C works great!
-Issue- When I turn the A/C on city on normal driving no loads or towing. The temps have gone up as high as 230 eot 230 etc. Ambient temps 83-90F ....