Ford Super Duty (1999-2016) :: F250 - Whistling Turbo Under Load
Mar 4, 2014
Just bought a 1999 7.3 f250 w/71000 miles and took it to a diesel guy and under load he said that the whistling was normal..is this correct?
View 3 RepliesJust bought a 1999 7.3 f250 w/71000 miles and took it to a diesel guy and under load he said that the whistling was normal..is this correct?
View 3 RepliesI have a 2015 ford f250 xlt crew cab, 6.2, fx4 with about 1200 miles on it. My questions are, I have noticed a hissing or whistling noise while accelerating. I took to dealer and was told it was the throttle plates not closing all the way.I was told they all do this. Normal? Very annoying noise with windows down. Another noise I have been having is the brake pedal makes a popping noise while applying pressure to brakes. Dealer said brake pedal assembly was out of alignment. They said was out of alignment 1/8". After adjustment within a few days popping started again.
View 6 RepliesHave a Whistling or hissing sound while accelerating? My 2015 6.2 seems to make this sound while under load. I took to dealer and they claim its the throttle plates not closing all the way. Claims this is normal, but to me it is annoying. Just would like to know what others think.
View 9 RepliesI have a 2010 F250 extend cab 4x4. While traveling about 70 down the freeway I get a whistling noise. It is usually worse when the wind is blowing hard or behind a semi. Wind makes the noise louder so I assume the noise is coming from the air hitting something. Slow down to 50 and noise goes away. Do not think it is mechanical because when a gust hits the truck it is worse. Checked all the windows, windshield and rubber parts. Where I should look.
View 9 RepliesI have a 99 f250 that seems like it has a bad coil, under a load it starts surging or bumping ( like it has in the past and I found a bad coil), I went through and unplugged each coil one by one while idling, couldn't find a bad one, so I bought a new coil and went through and rotated the coils, nothing worked, no check engine lights on.
View 9 RepliesI have a 2002 F250 with 189,000 miles. Im having some very bad issues that im trying to fix. The truck idles rough, with fluctuating RPM's. In certain speed reanges it also shakes and runs rough. If I turn the overdrive off the shaking pretty much stops, but it still accelerates pretty slowly. There is also a whistling noise from the front of the truck until the engine warms up, someone told me it sounds like a bad intake manifold? Does that sound right? What could be going on with my truck? All spark plugs and coil packs have been replaced, as well as the fuel injector rails.
View 2 RepliesAbout 20 miles into it, and it starts cutting out on me under load, over about 1/4 throttle. I baby it a ways further, and park at a wal-mart. Idles fine, but once again, after 1/4 runs like crap, acts like it's back firing through the intake spit and sputtering. Have the wife come pick me up since I was heading to work. Decided to shut it off, and restart, and it acts like its never had a problem.
Was messing with it today, and let it warm up in the driveway. Once it got hot, same story good 1/4 throttle, past that, not so much. Shut it off, started it back up and drove it to see if there's any codes at vatozone. Drove good (laying into the throttle) for about 2-3 minutes, back to same behavior. Hooked up code reader, no current codes, and no historic codes. Although I did notice (actually since I bought the truck) that the check engine light never comes on, even at initial start up. Looking at my spare cluster, it's an l.e.d. So no bulb out I guess unless the led is bad. Truck has around 130,000 miles on it. Everything is stock.
I'm leaning toward a fuel pump, a clogged cat, or a fuel pump relay or cutoff switch problem.. It doesn't have any other issues than that, and has been a good truck for the 10k miles I've owned it... 2003 F250 5.4...
I have a 2001 Ford F-250 5.4L V8. 117,000 miles. The problem I have been relentlessly trying to diagnose is a slight bucking that occurs under load when the truck is in overdrive. When the truck bumps up to higher RPM's it is fine but when it is around 1500-1700 RPMs on the highway it does a small buck like I'm hitting a bump in the road. I know there are many threads on this but none of them have gotten me any closer to a resolution. It also seems to have a bit of power loss when accelerating. Things I have done so far.
-Spark plugs and COP replaced about 1000 miles ago
-New fuel filter
-Cleaned MAF sensor
-Cleaned throttle body
-New PCV
-Seafoam treatment in gas and through brake booster.
I have a 2000 f250 7.3 powerstroke. I bought the truck with 218000 miles on it, I have only put 1000 on it. I have had some issues with. The cps went out of it, and it wouldn't start until u replaced it. I have a Ts chip on it and cold air intake. It will not start after a cold night, it starts fine if I plug it in. It also lopes, or misses no matter the temperature outside. Also, it will blow a steady flame when you get on it. Finally, it also gets hot, smoke will come from the turbo after driving it for a while, no matter how you drive it.
View 2 RepliesMy F250 6.4, 3.73 Crew Cab Short bed vibrates when accelerating from a stop with my 5th wheel on. The 5th wheel weighs 12K. It is a medium to high frequency vibration that is felt throughout the entire truck. It continues through the shift into 2nd (TorqueShift Tranny). The harder you accelerate the more you feel it.
It does not occur if truck is unloaded and you accelerate at full throttle. Is this normal or should I get it looked at?
I have a 2002 F250 CCSB Lariat 4x4 with the Triton V10, I'm up to 232,000 miles so far and fairly happy with the old girl. Just this weekend, I noticed some hesitation when at idle and even more rough running when under slight load. The misfire/hesitation is worst when going up a slight hill, when the truck is accelerating at low RPMs.
I am getting zero trouble codes or freeze frame conditions on my scanner. What should be my order of diagnosis? Vacuum test at line from PCV to TB, COP test? EGR inspection? Plug inspection? Also, how do you test a coil if resistance is not a reliable method?
Just bought a watchdog monitor by Bullydog. What are the normal levels for Boost, MAF, Load for a SD Twin Turbo 6.0L?
View 7 Replies06 250 5.4 40k on it, usually when cold and accelerating engine will misfire and stutter and then continue accelerating. The wrench light will flash sometimes but it wont store a code. This used to be vague in occurrence but has now started to be more a common occurrence even when up to normal operating temps.It seems only to misfire /stutter on hard acceleration or towing/hauling heavy loads. The only answer I got from a mech would be to do a computer reflash, not sure why /how this would fix whats going on.
View 1 RepliesSo basically I thought it would be a great idea to degrease my motor from the top down.... After washing I start it up and drive down the road to head abunch of misfiring under heavy load or high rpm's.
My problem is that the misfiring won't throw a code. I then proceeded to buy a new ignition coil (thinking this was the problem) but with no code to go off which cylinder was bad I just switched the good ignition coil into each cylinder and starting it.
Up each time. None of them seemed to make it better. Also the injectors all seemed to be good. So what to do ?
2002 Ford F-250 5.4l
After finding that a battery was low and not getting charge, they found the alternator was bad. Replaced that. Next the battery that was low was able to be charged and did not effect the other battery. Both batteries have been load and charge tested and they both read 84% charged. I am told this is "good."
Next I swapped both fuel filters and did the oil change as well. I finally got a chance to get my friend to run his scanner on it. The results are injectors and FICM. The codes are PO261, 264, 267, 270, 273, 276, 279, 282, and finally 611. I guess this means that the FICM is toast.
I have tried salvage and no one has anything. I guess I still don't understand how this truck is capable of running daily with the computer throwing every code dealing with the injectors and the computer that runs them.
I have a 2000 f250 crew cab short bed 7.3 on a 6inch bds lift and 37 inch tires. When I accelerate pretty much any load above 1200 rpms I can feel a vibration, kinda feels like it may be coming from the front left but I'm not sure. I have heard that a wheel bearing going out can cause this, would this maybe be what's causing it?
I thought wheel bearing because it kind of sounds like there's a howl when decelerating, probably when accelerating as well but the trucks too loud and I can't hear it. or also have heard motor mount gone bad, I've also heard ujoints but the ujoints were done this summer. the front ujoint is bad but the front driveshaft shouldn't be turning when out of 4x4 and hubs unlocked.
2 wks ago I was running down I95 at about 95-100 mph (basically floored) in a rush to get somewhere on time. Since then my truck has been running for crap. It threw the p0171 code when I checked it. When driving under normal conditions it pings a lot and my mpg is down about 3 mpg and has this hesitation when you get on it. Even when you accelerate at a normal rate it surges a little, it pings a lot and has a loss of power, about 30-40%. It feels really sluggish and doesnt want to pull and then you will feel it starting to pull a little harder then it starts to surge/hesitate a little again.
Truck has 147k on it. I was having a similar situation until I had the plugs replaced at 125k, so I figured the plugs shouldn't be the problem. So I replaced the fuel and air filters, cleaned the maf w/maf cleaner and Throttle body w/tb cleaner and replaced the pcv with a new one from ford. Still pings bad under load and still has the hesitation/surging and crappy fuel economy. Its running smoother but no fix yet. This is crazy trying to pinpoint this issue. The detonating isnt crappy gas because I used super and it still detonates quite a bit.
Its a 06' F250 5.4 3V XLT Lariat SC FX4....
I've noticed during the winter my 2012 6.2L engine seems to 'whistle' when it is cold. It also seems to do it intermittently...that is, it always whistles when cold, but it might stop for 30 seconds and then do it again. It does it at idle, and also when driving, just until it warms up.
What is it, and do other people's trucks here do that? I was thinking maybe the engine fan, but why would it cycle on and off for maybe 30 seconds. My other thought was A/C pump.
After 225,000 miles, my turbo appears to have failed -- not spinning. This is a stock turbo that is unaltered. Yes, I change my oil and filter every 3000 miles.
My question is; what is a reliable after-market replacement part that will bolt up?
My current truck is an early 99 F250, 7.3L diesel, CC 4x4(manual shift transaxle) auto transmission. It is basically stock, with the exception of a hutch/harpoon and a new fuel pump over the winter, an AIS intake. I have a magnaflow exhaust kit in the garage along with bellowed up pipes but have not installed them yet.
Here is my issue. Several times over the last 2 years, the truck will pull a load, or long trip, and with complete randomness, the engine will feel like it has shut off, there is usually a jerk or two, and the truck "restarts" itself and continues on like nothing happened. Last year we drove 1.5 hrs from home with the boat in tow, driving up Snoqualmie pass, and it died completely, no restart. We had to be towed home. It started right up at the shop, so no real clue of what happened.
When this happened, I had the fuel system checked for pressure and replaced the engine fuel filter, and all was good. I also had the Cam position sensor replaced/updated to the new grey sensor. Shortly after, I had the minor jerk/stall occur again, so I replaced the fuel pump and did the hutch/harpoon mod to ensure there wasn't an intermittent fuel pressure loss and that the in tank filters were not clogged.
Last weekend, i pulled my boat to Oregon, and the same "hiccup" happened as I was about 1.5 hrs into my trip. it was fine after that the rest of the 4 hr trip. We also drove back the same route and had no problems.
50 V10... How to tell if the grumbling sound when under a load is the posi plates? If so, how to replace them.
View 8 Replies